Идеально подходит для использования внутри помещений микро самолетов.
Быстрый ответ. Мощный двигатель.
Работает со стандартными приемниками на батареях 1S LiPoly.
Seperate управления плата изолирует grount и удаляет interferance из MCU, что делает сервопривод более точным и более гладкой, чем другие одиночные сервоприводы печатных плат.Характеристики:
Размер Категория: Линейный Микро серво (слева)
Применение: Ультра-Микро самолета
Размеры: 20 х 14 х 7 мм
Вес: 1,5 г
Коробка передач Тип: Нейлон
Тип разъема: JR
Вес ( г )
I bought two (left & right) for testing. But both does not work. One jitter and does not move, the other is running to its endpoint and gets very hot.
The packages shows that is is produced by ASSAN, but I cannot fit this product on their Homepage.
I would exspect better quality for the money!
Cheap should not mean scrap!DOES WORK ON 5v.good little servo, a little heavier than spectrum, but work just as well so far, and a great deal for less than 1/4 the price. i have these in a highly midified pz ultra micro mustang, they operate flawlesslyBought a shipset weighing in at 2.87g and 2.88g per side - clearly more than advertised. They seem responsive and relatively strong but buzz and jitter at neutral. I prefer normal rotational 2.5g to 3g servos with case stripped down over this type. HK doesnt allow duplicate review so I typed this extra sentence for the Left product.Got mine last week, has the larger 4x12mm motor. Weight out of the package was 2.9 grams. I removed the heat shrink, replaced all the wire with shorter and lighter gage and used a smaller connector for the AR6400. Weight is now 2.3g. Works fine with my AR6400, 4 stars for having to do a bit of tinkering to get it close to listed weight.I read elsewhere from Assan: we changed a longer motor to improve the force.that is you will got this time.
then, we will take another step improvement to make it assit 2S power.and with Mini JST version.
Looks to me like HobbyCity may need to let us know of these product improvements, update the product weight, and/or perhaps assign this a new part number as it changes significantly.
JimFinally got some.. Had them on the servo tester for 30 mins with no issues, resolution fine, centering fine BUT WHY DO MANUFACTURERS INSIST ON LYING ABOUT THE WEIGHT !!!!!
They weigh in a 3g, by removing the heatshrink on the pcb, you get about 0.2 g back, removing the plug and replacing it for a smaller connector as on the AR6400 and slightly shortening the cable will save approx a further 0.2g so still 2.6g.
Only 3 stars because of the BS !You might find further reviews (the customer rated)
- displaced by s/w malfunction - on: