Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

Micro MWC управления полетами Board DSM2 Совместимость ESC X4 в Матовый Integrated

Micro MWC управления полетами Board DSM2 Совместимость ESC X4 в Матовый Integ...

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

2 066,80 руб.
Stock:
Вес:
14 g
Артикул:
9154000007-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Это удивительное все-в-одном микро MWC контроллер полета с интегрированным 6ch DSM2 совместимым приемником и 4x щеткой ESC-х! Этот контроллер полета пакеты мощность акселерометром и гироскопом ATmega328P микроконтроллером и MPU6050, вся эта технология выдавливается на доске размером штампа! Он поставляется с предустановленной загрузчиком и MWC 2.2 и обновляемое и перестраиваемый бросил порт FTDI на борту.

Это начало удивительным микро нотации или серьезного обновления к существующему микро четырехугольника, который только просят власть платформы MWC.

Особенности:

• ATmega328P
• MPU6050 акселерометры / гироскоп
• UART для FTDI связи
• MWC поддерживает платформу
• Интегрированный 2A щеткой Х4 ESC в
• Встроенный 6-канальный ресивер, совместимый с DSM2
• предустановленное Загрузчик и КТМ 2.2

Конфигурации:
4 ротора (X, Y, Y 4)
6 Ротор (Y6, X6, Y) 6Rotors требуют внешнего ESC-х

Технические характеристики:
Размер: 32X20X4.8mm
Вес: 1,8 г
Рабочее напряжение: 3.2-4.2v (1s LiPoly)
Модуляция: DSM2
ESC: 2A щеткой интегрированной Х4
Антенна Длина: 30 мм

* Если вы хотите варианты барометрической / Mag / GPS
, пожалуйста , смотрите на MINI MWC FC
* Передатчик для MICRO MWC платы управления полетом должен поддерживать DSM2 и 4CH или выше (мы рекомендуем 6CH или выше)

Product
Specifications

Дополнительная информация

  • Артикул:
    9154000007-0
  • Brand:
    Нет
  • Вес ( г )
    14.00
  • длина
    30.00
  • ширина:
    5.00
  • Высота:
    20.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Was a bit of a pain to solder given the size but man, what a hell of a little FC. On my first battery change I plugged in a battery that was wired backwards which let to a huge spark and a small fire. I immediately unplugged it and plugged in another battery... the thing just kept going like nothing happened.

Would buy again!

RC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich hatte ebenfalls beim ersten Start den Totalausfall aller FETs.
Dadurch wurde das Board fr mich unbrauchbar.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Quite good product. A bit too expensive.. If you do your homework, you will not burn the FETs. Ive not tried run the stock firmware. Depends on the motors, you need to adjust the config files. My old, micro quad with broken electronics flies again. Does the loops, flips, very stable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Fets (3 of them!) burned out at first motor start. It's a common problem, must be wrong Fet type for the job. I am EE with tools for SMD work, so I replace. But this board is just unusable as it was sold.
Browsing the forums it is a common problem, faulty series.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First I made a adapter cable to connect the serial port to the PC, using 2 of HK JST-SH 3pin plugs, cutting them into 2 halfs and glueing together for a 4 pin plug. 3.3V level requires a level shifter 3.3V <-> 5V, then it worked perfect.

Preloaded firmware works with my ladybird quad very well, good and stable autolevel, only yaw rate is bit low.

The spektrum RX part works well, bind was quick and successful with my DSM2 HF module.

Would be interesting to have to board even smaller and w/o spektrum HF, so alternative RX modules could be attached (e.g. Jeti sat).

Great, would buy it again!
Henning
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It does what it says and is really the only brushed multiwii board I could find. I managed to upload and connect the GUI to it but I had to buy a 4-pin JST-SH connector elsewhere and connect that to my FDTI. That said, I really like this board, very stable flight and autolevel capable. Brought new life to my v939.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good things:
- It is very small.
- It works.
- Comes with bootloader and software installed.
Bad things:
-The serial connector is not standard an HK WONT SELL THEM.
-If you want to connect the GUI your in trouble.
-If you want to update the soft your in trouble.
-motor drivers have no flyback diode installed.
-The reset line is not connected to DTR so you have to ... be really lucky to update the soft with arduino bootloader.

Summing it:
If you like trouble this is for you.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.