Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

MKS DS9660 Precise Digital Servo 4.6kg / .10sec / 27g

MKS DS9660 Precise Digital Servo 4.6kg / .10sec / 27g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
89 g
Артикул:
DS9660

Combine

essential items and
acc
Описание
товара

Это высокая точность сервопривода, который будет лучше всего подходит для гибких и чувствительных 3D вертолетов. Он может быть использован в плоскости, хотя его точность не может быть в полной мере оценены. Лучше specd и более точным, чем Futaba или Hitec, МКС DS9660 является уважаемым серво в Тайване, Корее и Японии.

Система управления: + Pulse Width Control 1500 мксек Нейтрально
Необходимый Pulse: 3-5 Вольт от пика до пика прямоугольная волна
Рабочее напряжение: 4.8-6.0 вольта
Диапазон рабочих температур: от -20 до +60 градусов Цельсия
Рабочая скорость (4.8V): 0.13sec / 60 градусов при отсутствии нагрузки
Рабочая скорость (6.0V): 0.10sec / 60 градусов при отсутствии нагрузки
Удерживающий момент (4.8V): 51,38 унций / дюйм. (3.7kg.cm)
Удерживающий момент (6.0V): 63,88 унций / дюйм. (4.6kg.cm)
Рабочий угол: 45 град. с одной стороны импульса путешествия 400 мксек
Направление: против часовой стрелки / импульсный Путешествие 1200 ~ 1500 мксек
Тип двигателя: Coreless Motor
Потенциометр Привод: Непрямой привод
Тип подшипника: двойной шарикоподшипник
Коробка передач Тип: Все металлические шестерни
Разъем Длина провода: 15 см
Размеры: 43 х 15 х 28.6mm
Вес: 1,58 унции. (35г) вертолеты применяются с 400 до 550 класса

Product
Specifications

Дополнительная информация

  • Артикул:
    DS9660
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    89.00
  • длина:
    0.00
  • ширина:
    0.00
  • Высота
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
dimensions are wrong
direct from mnufcturer. Specs:

Control System: Pulse Width Control
Working frequence: 1520s / 333hz
(RX) Required Pulse: 3.0 ~6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 ~6.0 V DC Volts
Operating Temperature Range: -10 to 60 Degree C
Operating Speed (4.8V): 0.13 sec/60 degrees at no load
Operating Speed (6.0V): 0.10 sec/60 degrees at no load
Stall Torque (4.8V): 3.7 kg.cm (51.4 oz/in)
Stall Torque (6.0V): 4.6 kg.cm (63.9 oz/in)
Connector Wire Length: 24.0 cm (9.4 in)
Dimensions: 35.8X15.2X29 mm (1.41x 0.6x 1.14 in)
Weight: 32.3 g (1.14 oz)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mal iyi ama pahal.

5-6 krm oldu salamlar imdilik...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very precise Servo. I unse it in my Zlin 50 for Rudder. Enough Power for that and the metal Gear shows still the same nearly not noticeable slope than at the beginning. Have survived now over 70 landings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Concurent direct de futaba,

fonctionne merveille,

command ici parce que tjours un peu moins cher que le prix en europe !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
these servos have the tightest metallic gearbox I have ever seen... Tighter than their rival MPX Micro Digi. The torque seem on par and this servo does support a direct power source made from 2s A123 (=6.6V) without heating or buzzing. A bit pricey but super high quality servo mounted at the full flying elevator of my 3.5m glider. The other two in my order will control the flaps of my new 5 m glider.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nearly perfect swash plate servo for an T-Rex 500. Fast, strong, precise and reliable. Fits well to the TR frame. - I use it at 6V in a V-stabi flybarless system.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What a great servo fast for tail (rudder)used with 401 work great no issues
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered 3 of them for my protos 500. They works perfectly. Very precise and strong for 500 cyclic. I recommend it for all pilot's level. If I build another 500 heli, I would use it again. Thank you HB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am very pleased with this product.

I bought a second set of servo for my 500

(SJM 430 Vbar and Trex 500 Vbar).

Fast, accurate, reliable.

Recommend to the cyclic 500.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received it recently and hadn't the time yet to test it. But i already knew this servo so i can say that is a great servo and very well construted.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.