Модель Летающая акула (включает в себя бесщеточный EDF)

• Overall
• Quality
• Value

Customer Rated

Sep 12, 2010

Out of the box this has some major problems. There was no y-harness for the ailerons, and the servo leads went just to the wing base near the fuse(they were not long enough to get inside the fuse at all). I had to get my own servo extensions/y-harness to complete the ailerons. The pushrods for the elevator are very flimsy, and although they would pull just fine, they would not push at all with any force(they just bend up inside body).

• Overall
• Quality
• Value

Certified Buyer Rated

May 25, 2010

Have made several flights till now, after the first flights the esc got really hot , now i took of the shrink and made a small cooling hole and all is ok.

it flyes surprisingly well, no stall or any bad manners. i don't regret the buy at all :)

it is really different from those crappy fighterjets most ppl have

• Overall
• Quality
• Value

Customer Rated

Apr 14, 2010

unique model, and nice to see that hobby city offers a pnp version. 20mm x 40mm gold inrunner pulls about 20+ amps in the stock fan. Esc heat shrink wrap is yellow and simply labled as 30amps. This is the fragile, but light eps foam. Hobby city shipped it fine, but mine was chipped out of the box. Also the fan was dislodged and needed to be glued back in. I think I'll mod the dorsal fin, and add some teeth, etc. :)

• Overall
• Quality
• Value

Customer Rated

Mar 16, 2010

Funny thing! But check ailerons. The hinges are tape that are not very well glued, so give them a little extra glue. And fly!

• Overall
• Quality
• Value

Customer Rated

Nov 25, 2009

this link explains it all

http://xkcd.com/585/

• Overall
• Quality
• Value

Customer Rated

Nov 05, 2009

Can anyboody measure the CG on theres,from were wing meets fuse at front and how far back for the CG?I bought airframe only,installed my electronics,the picture they put for CG is worthless,I need the measurment,thanks!

• Overall
• Quality
• Value

Customer Rated

Oct 05, 2009

look very nice

fly nice, take off and land nice

price cheap

• Overall
• Quality
• Value

Customer Rated

Sep 29, 2009

Shark Jet - Very Cool plane . bought for my son amperage good, 24 amps on 3s lipo. after 2 flights motor got hot melted mounting bracket, fan locked up and jammed burning motor and causing crash.

Not Hobby King fault they did not make it. Manufacturer needs to address motor selection.

My son is so sad he loved this plane, cannot afford to replace it.

• Overall
• Quality
• Value

Customer Rated

Sep 11, 2009

On mine the motor poled and burnt out first flight , I replaced the motor and fan with this GREAT fan/motor combo , cut open the hatch u http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6632&Product_Name=EDF64_with_ADH300_Motor_Assembled__252W(4300kv)



AND a 40amp speedy , running on 4s 2200mah it FLYS GREAT , loops inverted rolls....put heavy duty clear tape on the bottom , NO wheels and hand launch....LOTS OF FUN RECOMENDED

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 01, 2009

ONLY ONE WORD EXCELLENT !

Very funny and flies like a dream !