New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Multistar 2212 - 920KV Multi-Ротор двигателя Комплект ж / CW и CCW Резьбовые Валы (4шт / коробка

Multistar 2212 - 920KV Multi-Ротор двигателя Комплект ж / CW и CCW Резьбовые Валы (4шт / коробка

Discontinued Product

Please continue searching for a similar product.
SKU:
9244000085-0
WANT FREE SHIPPING? Click here to find out more!

В поисках замены комплекта двигателя для вашего SK450 или испытанной системы питания для вашего следующего проекта Multi-ротора? Нет необходимости искать дальше!

В OutRunners Turnigy MULTISTAR разработаны с одной вещью в виду - максимального повышения производительности Multi-ротор! Они имеют высокие подшипники качества, счетчики высокий шест для меньшим уровнем шума, плавности мощности и повышения эффективности. Они имеют настраиваемый монтаж двигателя и все точности сбалансированы для плавного хода. Эти двигатели разработаны специально для использования мульти-ротора и не основаны на самолетных двигателей, а качество изготовления и детали стоит до самого пристального внимания.

Этот набор двигатель оснащен одной парой с обратной резьбой валов (КНО) и одной паре со стандартными валами с резьбой (CW). Это позволяет им быть совместимы с натяжными самостоятельно реквизита, таких как те, которые используются на DJI Phantom 2. Это делает для очень удобного снятия и установки ваших реквизита вручную, не требуется никаких инструментов!

Multistar упрощает мир Multi-роторы с их специально построенной производственной линии и принимая догадок из вашей установки.

Технические характеристики:
KV (RPM / V): 920
Lipo клетки: 2 ~ 3s
Max Amps: 20A
Размеры (Dia.xL): 27 х 23мм
Вал двигателя: 5мм
Пропеллер крепления: 5 мм купольный шестигранные гайки поставляются (2CW и 2CCW)
Монтаж Расстояние между отверстиями: 16 х 19мм (отверстия М3)
Предлагаемые реквизита: 9 х 6 медленно летают ~ 10 х 4.7 медленно летать
Разъемы: 3,5 мм пуля

В стоимость входит:
4 х 2212 - 920Kv MULTISTAR двигатель
4 х 5 мм куполообразные шестигранные гайки (2CW и 2CCW)

  • Артикул 9244000085-0
  • Brand MultiStar
  • вес 358.0000
  • длина 100.00
  • Packaging Width 40.00
  • Высота 100.00
  • Kv ( об / об) 920.00
  • Max Токи (A) 20.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 11.00
  • Мощность (Вт ) 130.00
  • Вал А ( мм) 5.00
  • Длина В ( мм ) 23.00
  • Диаметр С ( мм ) 27.00
  • Может Длина D (мм ) 13.00
  • Общая длина E (мм ) 38.00
  • MultiStar 2212 920KV Motor Set
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good engine on my SK450 and 9x4,7 prop. Flight time is approximately 10 min 3S / 3000mAh. I think that I buy four new engines for my next quad, so I have the same engines on both the quad. If a motor goes bad, I have spare engine from the second quad. 10x4,7 propeller also works well with the engine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good engine on my SK450 and 9x4,7 prop. Flight time is approximately 10 min 3S / 3000mAh. I think that I buy four new engines for my next quad, so I have the same engines on both the quad. If a motor goes bad, I have spare engine from the second quad. 10x4,7 propeller also works well with the engine.

use for a quadricopter, nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

use for a quadricopter, nice

Really po'd the video says these can use 'standard style' props on these motors, but none the props I use on other quads fit these motors. I guess I will have to drill them out. Their video guy should get his facts straight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really po'd the video says these can use 'standard style' props on these motors, but none the props I use on other quads fit these motors. I guess I will have to drill them out. Their video guy should get his facts straight.

Very good motors for Q450 V3 Glass fiber.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motors for Q450 V3 Glass fiber.

great motors, need some M3 x 5 bolts to mount them to the frame but so far these great motors are performing well on a 450 size quad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great motors, need some M3 x 5 bolts to mount them to the frame but so far these great motors are performing well on a 450 size quad

Good motors so far, no issues but some m3 bolts would be most useful, so if you don't have them, order them now

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motors so far, no issues but some m3 bolts would be most useful, so if you don't have them, order them now

Love this setup! I am currently flying these motors in my TBS Discovery with 10/5 props. Excellent flight times!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this setup! I am currently flying these motors in my TBS Discovery with 10/5 props. Excellent flight times!

Nice...a 4 pack of motors...with issues.
1 of the motors had 4mm bullet connectors on it and didn't match the other three.
2 of the motors have clicking bearings. I don't expect these two to last long.
1 of the motors has 1/16" of vertical play. It's a simple adjustment to fix but is an example of bad QC.

This is not a purchase I would recommend to others.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice...a 4 pack of motors...with issues.
1 of the motors had 4mm bullet connectors on it and didn't match the other three.
2 of the motors have clicking bearings. I don't expect these two to last long.
1 of the motors has 1/16" of vertical play. It's a simple adjustment to fix but is an example of bad QC.

This is not a purchase I would recommend to others.

For the money, pick a set up! put these on a 500mm quad with 1047 props. 2200 20c 3cell i get 9 mins aggressive flight time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the money, pick a set up! put these on a 500mm quad with 1047 props. 2200 20c 3cell i get 9 mins aggressive flight time.

Part 2
As advertised these are designed fit DJI-style self-tightening props. Regular props with 8mm-hub can be mounted using the supplied cone nut. That is a larger bore than most common props have, in which case they must be reamed . That must be done carefully to maintain centering and on some props might leave the hub walls too thin for safe operation. Graupner makes props with 8mm hubs but they are expensive. The recommended DJI-style props are likewise more expensive than regular ones but can mounted and removed without tools and will not spin off in flight.

Bench tests produced the following results at WOT.. << 10x4.7 GemFan prop: 15 amps, 183 watts, 820 grams thrust, 4.5 grams/watt efficiency. >>.. << 9x4.7 GemFan prop: 10.8 amps, 135 watts, 755 grams thrust, 5.6 grams/watt efficiency, the best efficiency I have seen in many tests. A DJI 9.4x4.3 self-tightening prop measured 10.1 amps and 121 watts. I was unable to measure thrust because my test stand requires inverting the prop, which I could not do in this case . eCalc returned a 4pcnt increase in grams/watt over the 9 GemFan. That made the DJI prop the best in performance and my favorite.

Note: After testing all of the motors I have one that will not spin up. Will report more information later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Part 2
As advertised these are designed fit DJI-style self-tightening props. Regular props with 8mm-hub can be mounted using the supplied cone nut. That is a larger bore than most common props have, in which case they must be reamed . That must be done carefully to maintain centering and on some props might leave the hub walls too thin for safe operation. Graupner makes props with 8mm hubs but they are expensive. The recommended DJI-style props are likewise more expensive than regular ones but can mounted and removed without tools and will not spin off in flight.

Bench tests produced the following results at WOT.. << 10x4.7 GemFan prop: 15 amps, 183 watts, 820 grams thrust, 4.5 grams/watt efficiency. >>.. << 9x4.7 GemFan prop: 10.8 amps, 135 watts, 755 grams thrust, 5.6 grams/watt efficiency, the best efficiency I have seen in many tests. A DJI 9.4x4.3 self-tightening prop measured 10.1 amps and 121 watts. I was unable to measure thrust because my test stand requires inverting the prop, which I could not do in this case . eCalc returned a 4pcnt increase in grams/watt over the 9 GemFan. That made the DJI prop the best in performance and my favorite.

Note: After testing all of the motors I have one that will not spin up. Will report more information later.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save