New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Multistar Elite 2204-2300KV Multi-Ротор двигателя 2-4S (CW Prop адаптер)

Multistar Elite 2204-2300KV Multi-Ротор двигателя 2-4S (CW Prop адаптер)

Now save сэкономь 0,00 руб. 0,00 руб.

944,22 руб.
Статус:
Нет в наличии!
SKU:
9536000001-0
WANT FREE SHIPPING? Click here to find out more!

В TURNIGY MULTISTAR Elite OutRunners разработаны с одной вещью в виду - максимального повышения производительности Multi-ротор! Новые двигатели Multistar Elite являются новым стандартом в исполнении Мультикоптер. Каждый Elite двигатель построен для определенного типа / приложение, позволяющее для дальнейшего уточнения и эффективности / мощности для оптимизации.

Multistar Elite двигатели более чем причудливое название и новый темно-зеленый цвет .. построен с использованием высококачественных компонентов из Японии подшипники, N45SH магниты, .2mm ламинаций, 180deg бескислородной медной проволоки, .005g балансировка, идеальный ветер лег и 100% QC, а затем конструкция каждого двигателя также оценивали по их типу применения и все, от их монтажа, к адаптерам типа опоры учитываются. Элитные моторы действительно произведениями искусства

Elite 2204 ~ 2300kv является высокоточным небольшой драгоценный камень двигателя, предназначенного для мини-диапазоне мультикоманд роторов и оптимизированной для 5inch опоры, идеально подходит для тех жестких рамок, где 5inch реквизита максимум. 2204 имеет съемный / сменный накатанной опору вала для тех случайных сбоев, лол .. и доступен в CW / КОО ароматизаторов с совпадающими пулевое оборудования. Нижняя рама двигателя скошен для легкого сантехникой на более жестких рамок и имеет много высоты для монтажа оборудования для намотки зазор.

Multistar Elite не имеет себе равных по качеству и стоимости, а также производительность говорит о своей собственной личности.

Особенности:
• Япония Подшипники
• N45SH магниты
• .2mm ламинаций
• 180deg бескислородной медный провод
• .005g Или лучше балансировка
• Совершенные укладывающие Обмотки
• 100% КК
• Адаптер опоры Сменная CW / CCW

Технические характеристики:
KV (RPM / V): 2300KV
Lipo клетки: 2 ~ 4s
Максимальный ток: 126.5w
Max Amps: 11.5A
Нет тока нагрузки:   0.6A / 10V
Внутреннее сопротивление: 0,125 Ом
Количество полюсов: 12/14
Размеры (Dia.xL): 22 × 4 мм
Вал двигателя: 3 мм
проп вал: 5 мм пропеллера адаптер CW
Вес: 24g
Болт расстояние между отверстиями: 16 * 19 M3
Толщина Ламинирование: .2mm
Магниты: N45SH
Балансировка спецификации: .005g
Проволока 180deg бескислородной
Разъем: 2 мм пуля

Опора данных:

Батарея Опора дроссельной заслонки Упорный Ампер
11.1V 5x3 50% 224g 3.7а,
11.1V 5x3 100% 371g 7.5A
7.4V 5x2 50% 120г 2.2A
7.4V 5x2 100% 200г 4.3a

Батарея Опора дроссельной заслонки Упорный Ампер
11.1 5x3x3 50% 232g 4.7A
11.1 5x3x3 100% 392g 9.9A
7.4 5x3x3 50% 134g 2.7A
7.4 5x3x3 100% 211g 6,7а

Батарея Опора дроссельной заслонки Упорный Ампер
11,1 6х4 50% 385г 7.5A
11,1 6х4 100% 591g 9.9A
7.4 6х4 50% 134g 4.8а
7.4 6х4 100% 211g 9.7А

* Примечание: Некоторые ESC могут иметь синхронизации проблемы , если вы не используете последнюю версию программного обеспечения (Simonk или BLheli), пожалуйста , убедитесь , что вы обновить и настроить Ваш регулятор скорости для данного типа двигателя.

  • Артикул 9536000001-0
  • Brand MultiStar
  • вес 115.0000
  • длина 95.00
  • Packaging Width 40.00
  • Высота 75.00
  • Kv ( об / об) 2300.00
  • Max Токи (A) 25.00
  • Сопротивление ( тк ) 0.13
  • Максимальное напряжение (В ) 15.00
  • Мощность (Вт ) 350.00
  • Вал А ( мм) 3.00
  • Длина В ( мм ) 17.00
  • Диаметр С ( мм ) 27.00
  • Может Длина D (мм ) 6.00
  • Общая длина E (мм ) 21.00
  • MultiStar Elite 2204 Motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Motores excepcionais para mini-quad. Acompanhados com o ESC Afro 12A v3 rocam nas horas, e não aquecem muito.

É pena que a indicação CCW e CW digam respeito ao spinner e não à rotação do motor. Para ultrapassar este problema troquei os spinners nos motores e agora está correcto.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motores excepcionais para mini-quad. Acompanhados com o ESC Afro 12A v3 rocam nas horas, e não aquecem muito.

É pena que a indicação CCW e CW digam respeito ao spinner e não à rotação do motor. Para ultrapassar este problema troquei os spinners nos motores e agora está correcto.

The Motors are well built, if you have luck.
I purchased 4 and two had a darker color and had quite strong vibrations. The other two were perfectly smooth and run very cool.
The Windings are very good, but the bearing seem to fail after a pretty short time.
After around 30 Flights they are already making typical noises of bearing failure and i am sure the won't last long.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Motors are well built, if you have luck.
I purchased 4 and two had a darker color and had quite strong vibrations. The other two were perfectly smooth and run very cool.
The Windings are very good, but the bearing seem to fail after a pretty short time.
After around 30 Flights they are already making typical noises of bearing failure and i am sure the won't last long.

Very good powerful motors. You can buy 4 of these then replace the prop adaptors but the CCW prop adaptors don't fit top ell on the motor but the FPV quad still is flying perfectly with no problems. I used 12 12amp ESC's and a 3s 2200mah zippy battery. My flight time is a good 6 minutes in which I was using all the functions on my RC transmitter. The speed of these motors are very fast and even on a self-level mode you still go very far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good powerful motors. You can buy 4 of these then replace the prop adaptors but the CCW prop adaptors don't fit top ell on the motor but the FPV quad still is flying perfectly with no problems. I used 12 12amp ESC's and a 3s 2200mah zippy battery. My flight time is a good 6 minutes in which I was using all the functions on my RC transmitter. The speed of these motors are very fast and even on a self-level mode you still go very far.

Been using these for about 6 months, they handle 5045 triblades bullnose on 4S like a charm. I feel like the bearings had wear a little, but I think is normal after so many dozens of packs flown.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Been using these for about 6 months, they handle 5045 triblades bullnose on 4S like a charm. I feel like the bearings had wear a little, but I think is normal after so many dozens of packs flown.

Not a bad motor for this price, seems to get hot fairly easily.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad motor for this price, seems to get hot fairly easily.

1 out of 4 already dead (burned) after 15 hours flight time. Used on a 3s setup with 5030 propellers. When they run they are really good and very efficient but unfortunately they don't last very long. So my advice: Don't buy them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1 out of 4 already dead (burned) after 15 hours flight time. Used on a 3s setup with 5030 propellers. When they run they are really good and very efficient but unfortunately they don't last very long. So my advice: Don't buy them.

I ran my quadcopter straight into the street at about a 45 degree angle and the motor still works! It must have been going around 70mph on impact.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ran my quadcopter straight into the street at about a 45 degree angle and the motor still works! It must have been going around 70mph on impact.

These Multistar Elite 2204 motors are quite good. Ive had them for over a year now, and am very pleased. Right out of the package the motor bell was well balanced, and no addition of tape would reduce the already minimal vibrations the motors had. They have experienced a little wetness and a lot of hard crashes, theyve outlived 2 frames and are on their third, albeit not CF frames, and are still running well. The bearings are not showing signs of rust yet, and have only now begun to sound like they may have dirt in them or be failing, but the bell is not loose. I would estimate they have over 20 hours of actual run time on them.
I fly a 250 size quad on 3s For the first few months it was 5030 and 5040 gemfan props, then I moved to 6030 gemfan props(larger frame). Both run well with a 12A ESC, and nothing would get too hot after hard flights, just some warmth in the ESCs. The prop/power data displayed on the HK website seems pretty accurate from my experiments. I recommend these motors, however you should buy the ones with the different CW & CCW prop adapters if you prefer using the prop spinners. I used M5 lock nuts for holding the props on after crashing twice from self-loosening nuts on the CW motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These Multistar Elite 2204 motors are quite good. Ive had them for over a year now, and am very pleased. Right out of the package the motor bell was well balanced, and no addition of tape would reduce the already minimal vibrations the motors had. They have experienced a little wetness and a lot of hard crashes, theyve outlived 2 frames and are on their third, albeit not CF frames, and are still running well. The bearings are not showing signs of rust yet, and have only now begun to sound like they may have dirt in them or be failing, but the bell is not loose. I would estimate they have over 20 hours of actual run time on them.
I fly a 250 size quad on 3s For the first few months it was 5030 and 5040 gemfan props, then I moved to 6030 gemfan props(larger frame). Both run well with a 12A ESC, and nothing would get too hot after hard flights, just some warmth in the ESCs. The prop/power data displayed on the HK website seems pretty accurate from my experiments. I recommend these motors, however you should buy the ones with the different CW & CCW prop adapters if you prefer using the prop spinners. I used M5 lock nuts for holding the props on after crashing twice from self-loosening nuts on the CW motors.

These are great motors but I do not recommend their spinners. They fall off really easily. I bought nylon nuts (locking nuts) to use instead. The motors are outstanding though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are great motors but I do not recommend their spinners. They fall off really easily. I bought nylon nuts (locking nuts) to use instead. The motors are outstanding though.

Tough motor. Make sure if you are using this on a plane you utilize some loctite to keep the spinner from getting lost.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tough motor. Make sure if you are using this on a plane you utilize some loctite to keep the spinner from getting lost.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking