Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

MultiWii SE V2.0 Полет управления ж / FTDI

MultiWii SE V2.0 Полет управления ж / FTDI

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
30 g
Артикул:
381000133
Описание
товара

V2.0 MultiWii SE является гироскоп / акселерометр на основе контроллера полета, который загружается с функциями. С опциями расширяемости и полной программируемости, это устройство может контролировать любой тип самолета. Это идеальный контроллер полета для самолета мульти-ротора.

Особенности:
• Небольшие размеры, 35x35mm монтажные отверстия
• 6 входных каналов для стандартного приемника и приемника PPM SUM
• До 8-осевой мощностью двигателя
выход • 2 сервоприводы для тангажу и крену карданного системы
• Может использовать выход сервомашинку, чтобы вызвать кнопку камеры
• FTDI / UART TTL разъем для отладки, загрузки микропрограммы или ЖК-дисплей
• I2C разъем для расширения датчика, I2C LCD / дисплей OLED или Крий i2c-GPS NAV доска
• Отдельный 3.3V и 5V регулятор напряжения LDO
• ATMega 328P Микроконтроллер
• MPU6050 6 оси гироскопа / акселерометр с блоком обработки движения
• HMC5883L 3-осевой цифровой магнитометр
• цифровой датчик давления BMP085
• На борту преобразователя логического уровня

Режим полета:
• Один из следующих основных режима
- Acro
- Уровень
- Alt Удерживать
- Начальник замка
• Дополнительный режим
- HeadFree (Беззаботный)
- GPS Удержание (Нужна GPS-приемник + I 2 C-GPS NAV Board)
- GPS Возврат в исходное положение (Need GPS приемник + I 2 C-GPS NAV Board)

Технические характеристики:
Размер: 40x12x40mm
Вес: 9,6 г
Крепление Расстояние между отверстиями: 35 мм (может быть изменен на 45мм от Крий Distribution Board)
Диаметр отверстия: 3 мм

Содержание пакета:
MultiWii SE FC х 1
Программа USB (кабель Mini USB требуется, но продается отдельно) плата х 1
3Pin к 1Pinx3 кабеля 100 мм х 2
3Pin до 3Pin кабеля 100 мм х 1


Более подробную информацию можно найти на веб-сайте MultiWii.
http://www.multiwii.com

Product
Specifications

Дополнительная информация

  • Артикул:
    381000133
  • Brand:
    Не применимо
  • Вес ( г )
    30.00
  • длина
    130.00
  • ширина:
    10.00
  • Высота:
    90.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Never Buy it from them. they will send you

XZN MWC MultiWii SE Standard multi-Copter 4-axis Main flight con

http://www.geeetech.com/xzn-mwc-multiwii-se-standard-multicopter-4axis-main-flight-con-p-552.html

this board which is very poor and cheaper(US 19) than the item shows in their listing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
They sent me the wrong board the 1st time. Did a RMA to replace wrong board and they sent me the same wrong board again. Can't comment on functionality because I've never received what I ordered!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good board for my 20 cm. arm small tricopter flying great with D2822/17 kv 1100 motor and 1,5 Ah lipo pack for about 10 minutes of very fun.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi All! I've got MultiWii 2.0 installed and running on my Quadro. HobbiKing Rx, HobbiKing 10A ESCs are used. Previously I used HobbyKing Multi-Rotor Control Board and it flied well. On this MultiWii control motors running not fast enough to take quadro off the ground. Even if I move throttle stick to the most up position it does not fly. Can anyone say what is wrong?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice board flying very well But when I tried to plug the battery monitor on A3 input as shown on file "pin assignments" (lipo directly on this input) I burn the Atmega ...I had to add the divider resistor before input the direct lipo voltage.So be carefull bfore wiring this batterie monitor input (A3 pin).
I put a updated picture of the pin assignments with the rsistors in the file section
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this board on a 55cm quad, replacing a homemade combo of Arduino ProMini and 4 single sensors boards... Adding a LZ-GPS was very easy because I2C is brought out on its own pin header. The HK S2 V2 board has the Crius V2 layout and comes with preloaded MultiWii 2.1 firmware for Quad X constellation. Firmware can easily be updated or changed to any other config with the FTDI header and Arduino 1.01 software. The MPU 6050 gyro/acc gives really great and stable flight behaviour with an very smooth ACC level mode never seen before. BMP baro is not state of the art anymore (low resolution), but its OK to get a height hold mode within 2-3 meters. Overall: Great board with good quality, small boards size, totally worth the money. Will buy a 2nd one for my Flydumini as soon as they are on stock again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good product!!! This comes pre-programmed. But the PID values are all out of boundaries. So you will face a hard time setting it up...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bu gne kadar kullandm kartlar arasnda en iyisi.
gps modl de almanz tavsiye ederim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The ever expandable MultiWii controller
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The 0.03 hectopascal maximum resolution of the BMP085 is an optimum enabling the sensor to respond to differences in altitude of 25 cm.



At this days pressure sensors have ~ 10cm. altitude sensitivity!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.