New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

MXS-R Пилотажная 3D Самолет 20CC Бало 1625mm (ARF)

MXS-R Пилотажная 3D Самолет 20CC Бало 1625mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
248000004-0
WANT FREE SHIPPING? Click here to find out more!

Один из самых горячих перспективных пилотажных самолетов вокруг является MXS-R. Хороший внешний вид в одиночку не хватает, Hobbyking MXS-R 20CC был разработан с одной вещью в виду, удивительный и экстремальных фигур высшего пилотажа.

Качество MXS-R 20cc просто так хорошо, как он получает, планер был построен, чтобы сохранить полетный вес минимальной, но достаточно сильны, чтобы взять на себя наказание крайних фигур высшего пилотажа. Превосходное качество покрытия было умело применять и для последнего штриха, капот, сени и колеса брюки закончили в глубоком глянцевой краской. Аппаратное обеспечение, которое включает в себя колеса, топливный бак и рога контроля углеродного волокна отлично, а также решили сохранить полетный вес до абсолютного минимума. Кроме того, особенности модели подключить крылья и углеродного волокна шасси и сборку хвостовым колесом.

HobbyKing MXS-R 20CC выполняет каждый дюйм, как хорошо, как он выглядит, естественно, это делает для большого спорта пилотажного самолета, но было бы справедливо сказать, что хардкор 3D является то, что MXS-R был разработан для. Легкий и точность планера, больших поверхностей управления, потрясающий внешний вид и топ-спецификации качества линии делают MXS-R 20CC должны иметь плоскость для всех пилотажных и 3D пилотов!

Особенности:
• Почти готов к полету - Просто установите ваш выбор двигателя, аккумулятора и электроники
• Все бальзы и фанеры строительство
• углеродного волокна шасси и хвостовое колесо в сборе
• Две части плагина в крыльях
• Superbly применяется, высокое качество покрытия
• Полная аэродинамическая стабилизаторе / лифт / киль и руль направления
• Отличная цветовая схема для легкой ориентации
• Большой люк для доступа Фюзеляж
• Дополнительный законцовки крыла генераторы боковой силы

Технические характеристики:
Размах: 1625mm
Длина: 1500мм
Площадь крыла: 50.1dm2
Пустой Вес: 2700g

Требуется:
20CC Газ Двигатель
6 Норма-High Torque сервоприводы
5-6-канальный передатчик и приемник
приемник батареи
Разное Клеи

  • Артикул 248000004-0
  • Brand Other
  • вес 7500.0000
  • длина 1230.00
  • Width 295.00
  • Высота 470.00
  • IC / 2 : Елец -
  • Motorsize ( диам - или - сс) -
  • Размах (мм ) 1625.00
  • Length(mm) -
  • SaleWeight ( г ) -
  • Емкость ( мАч ) -
  • 20cc MXSR
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.

Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!

Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.

Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.

Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.

Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

Customer files
No File Name Download [2792]
No File Name Download [2792]
No File Name Download [2077]
No File Name Download [2057]
No File Name Download [6461]
Manual MXS-R (English) Download [5784]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save