Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

NTM Prop Drive 50-50 580KV / 2000W

NTM Prop Drive 50-50 580KV / 2000W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
405 g
Артикул:
NTM5050-580

Combine

essential items and
acc
Описание
товара

Двигатели NTM Prop Drive являются незыблемую OutRunners производительности с плотными обмотками, качество подшипников, правильно подобранными магнитами, сбалансированном статора и колец потока плюс они QC проверяется на 14 пунктов, от обработки материала весь путь вплоть до окончательного испытания дино.

Потому что мы проектируем и строим эти двигатели полностью в доме (от 3D / 2D рисунок к материалам поиска, обработки, балансировка, окончательная сборка и дино) мы можем полностью контролировать производство и обеспечивать согласованность продукта от проектирования и заканчивая доставку продукта к вам. Удаление средних-мужчин означает, что мы можем водить лучшее значение на рынке и в розницу эти двигатели на заводе (наши) цены! Все рабочие характеристики реальны и проверены на наших собственных моторных динамометрических стендах.

Наши инженеры КК проверить и баланс каждого двигателя перед отправкой на склад HobbyKing.com.

Технические характеристики:
Модель: NTM Prop Drive Series 50-50 580kv
Kv: 580rpm / v
Максимальный ток: 90A
Максимальная потребляемая мощность: 2000W @ 22.2V (6S)
Вал: 8мм
Вес: 347g
ESC: 100A
Количество клеток: 4s ~ 6S LiPoly
Отверстия под болты: 30 мм
Болт резьба: M4
Подключение: 4мм Пули-разъем

Prop тестовые данные:
14x8 - 14.8V / 587W / 40.3A / 2.9kg тяги
14x8 - 18.5V / 1077W / 60.7A / 4.03kg тяги
14x8 - 22.2V / 1906W / 88.2A / 5.36kg тяги
15x8 - 14.8V / 626W / 43.6A / 3.3kg тяги
15x8 - 18.5V / 1165W / 64.2A / 4.85kg тяги
15x8 - 22.2V / 1961W / 88.8A / 6.15kg тяги

Product
Specifications

Дополнительная информация

  • Артикул:
    NTM5050-580
  • Brand:
    Не применимо
  • Вес ( г )
    405.00
  • длина
    158.00
  • ширина:
    53.00
  • Высота:
    95.00
  • Kv ( об / об)
    580.00
  • Unit Weight (g)
    347
  • Max Токи (A):
    90.00
  • Сопротивление ( тк ):
    0.00
  • Максимальное напряжение (В )
    22.00
  • Мощность (Вт )
    2000.00
  • Вал А ( мм):
    8.00
  • Длина В ( мм ):
    50.00
  • Диаметр С ( мм )
    50.00
  • Может Длина D (мм )
    30.00
  • Общая длина E (мм ):
    76.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor's internally glued (fail) stator came unglued and damaged the coils.

HOBBYKING FAILED TO HONOR THEIR WARRANTY SAYING I "OPENED" THE MOTOR AFTER SLIDING THE STATOR FROM THE OUTER SHELL.

Find a different business, these people are a joke.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this motor in a 3D hobbies YAK and it has gobs of power, way more than is needed to 3D this plane. I'm using 6S and a 15x6E APC prop. I did have to replace the retaining clip on the shaft after a dozen flights or so but have not had any issues at all with the rest of the motor (no problems with magnets, etc.) at least yet. For the money it is quite the powerhouse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sweet motor, I installed it in a phoenix tiger 3 40 to 55 size
With turnigy AE 80amp speedie 6s turnigy 5000mah battery
13x8 apc prop it's pulling 1598watts at 64 amps only had the chance to fly it once (dam work keeping me from flying ) it has awesome
Power great vertical, when I pulled up it almost went out of sight
Can't wait to get out this weekend
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is NOT shown with any mounting hardware, but it does say which mounting hardware to order. Secondly if you look close at the motor picture you can clearly see that the mounting hardware needs to go were the motor shaft is, or you need to mount the motor inside the mounting interface so that the shaft is pointing forward.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good. Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello

After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good.
Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor shows up with no mounting brackets or way to attach prop. Without these components the motor is worthless.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An excellent motor, mounted into a Wot 4 XL with a 100amp ESC, original motor was a SC 120 4 stroke, don't really notice the difference other than the noise and cleanliness of the plane when flown, my view is ya can't go wrong with this...Great, keep up the good work HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this motor ,it appears to be well made.have test run it to 40 amps so far no problem but would like to know what brand/type of prop hk used for their test data
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a strong Motor. I fit it in a 81" Piper. First I tested the engine in a test bench.
I use a 5S Zippy-LiPo 4500 mAH
Propeller 1: Turnigy Ultra-Light wood 15x6
54,3 A, 1005 Watt, 5,1 Kg Schub
Propeller 2: TGS - Sport 15x8
70,1 A, 1322 Watt, 4,5 Kg Schub
ESC: YEP 100 A 2-6S
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.