Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

NTM Prop Drive Series 28-26 1100kv / 252w (короткая версия вала)

NTM Prop Drive Series 28-26 1100kv / 252w (короткая версия вала)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

897,00 руб.
Stock:
Вес:
80 g
Артикул:
NTM2826S-1100

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Это короткая версия вал нашего популярного НТМ 28-26 1100kv бесщеточный скороход двигателя. Он построен без внешнего вала, позволяя Вам легко монтировать этот двигатель к раме несколько ротора без необходимости каких-либо изменений.

Двигатели NTM Prop Drive являются незыблемую OutRunners производительности с плотными обмотками, качество подшипников, правильно подобранными магнитами, сбалансированном статора и колец потока плюс они QC проверяется на 14 пунктов, от обработки материала весь путь вплоть до окончательного испытания дино.
Потому что мы проектируем и строим эти двигатели полностью в доме (от 3D / 2D рисунок к материалам поиска, обработки, балансировка, окончательная сборка и дино) мы можем полностью контролировать производство и обеспечивать согласованность продукта от проектирования и заканчивая доставку продукта к вам. Удаление средних-мужчин означает, что мы можем водить лучшее значение на рынке и в розницу эти двигатели на заводе (наши) цены! Все рабочие характеристики реальны и проверены на наших собственных моторных динамометрических стендах.
Наши инженеры КК проверить и баланс каждого двигателя перед отправкой на склад HobbyKing.com.

Технические характеристики:
Модель: NTM Prop Drive Series 2826 1100kv
Kv: 1100rpm / v
Поляки: 12
Мотор Ветер: 17T
Максимальный ток: 20A
Максимальная потребляемая мощность: 189W @ 11.1V (3S) / 252W @ 15V (4S)
Вес: 54g
ESC: 20 ~ 30A
Количество клеток: 3s ~ 4s LiPoly
Отверстия под болты: 16мм и 19мм
Болт резьба: M3
Подключение: 3,5 мм разъем Пуля

Prop Тесты:
8x4 - 11.1V / 100W / 9.1a / 0.54kg тяги
8x4 - 14.8V / 116W / 14A / 0.82kg тяги
9x6 - 11.1V / 149W / 13.6A / 0.73kg тяги
9x6 - 14.8V / 285W / 19.6A / 1.05kg тяги

Примечание: Пакет принадлежностей доступен для этого мотора. Пожалуйста , смотрите соответствующие пункты ниже.

Product
Specifications

Дополнительная информация

  • Артикул:
    NTM2826S-1100
  • Brand:
    Нет
  • Вес ( г )
    80.00
  • длина
    70.00
  • ширина:
    35.00
  • Высота:
    60.00
  • Kv ( об / об)
    1100.00
  • Max Токи (A)
    20.00
  • Мощность (Вт ):
    300.00
  • Длина В ( мм ):
    28.00
  • Может Длина D (мм )
    15.00
  • Максимальное напряжение (В )
    15.00
  • Вал А ( мм):
    0.00
  • Unit Weight (g):
    54
  • Диаметр С ( мм )
    28.00
  • Общая длина E (мм )
    29.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Motore molto valido nelle prestazioni
Quality
Value
Overall
Quality
Value
Overall
As others have stated the bearings let these motors down however it isn't as simple as bad bearings the problem is actually with the recess the bearings push into. It is only the top bearing that is problematic on my motors, I have 4 and all are poor. Out of the motor the bearings feel fine however when you push them in it closes up and becomes 'notchy', clearly the recess is machined just a touch too small.

In addition you might notice the motors making a noise which I found to be due to radial play. There is a small grub screw which holds the casing to the shaft allowing you to adjust the preload on the bearings reducing the clearance.

The rest of the motor seems fine however I can't recommend them due to the above problem and am considering trying to get my money back.
Quality
Value
Overall
Quality
Value
Overall
I ordered 4 of these for a quadcopter. In the initial testing, one of them does not work at all and another runs rough. The other two seem fine. Also the recommended accessory pack has the wrong hole pattern for the bottom attachment.
Quality
Value
Overall
Quality
Value
Overall
Ordered 4 and at least two have rough feeling bearing that rattle, all four have play in them. I opened a support case for them and hobbyking have not even had the decency to reply.
Quality
Value
Overall
Quality
Value
Overall
Smooth, powerful and cheap, I put them on a SK450, motors react very quickly to stabilize, and takes off like a rocket when you mash on the launch stick. No issues like others have said.
Quality
Value
Overall
Quality
Value
Overall
Nice motors, pretty good build quality and no rattling bearings. Really. I've read tons of reports about bearings being bad on these motors. And even if they were bad from HK, they are cheap and there are higher performance bearings available too.

Anyway, these motors start to smell at about 15Amps. Didn't drove them to 20 and hope I'll never will but I'm sure they will burn in 10s. at 20A.

But, If worst comes my way, I'll rewind them with better wires.

Running them on 30A BEC-less Multistar ESCs.
Quality
Value
Overall
Quality
Value
Overall
Die Motoren haben Trotz Ihrer kleinen gre Leistung ohne Ende. Sie versetzen meinen Quadcopter mit X666 Rahmen in Extreme Geschwindigkeiten. Was mich jedoch strrt ist das die Motoren von anfang an Spiel in den Kugellagern haben.
Quality
Value
Overall
Quality
Value
Overall
tres bon moteur, fonctionne parfaitement avec une helice 9x5 e-prop, une lipo 4S 5000mah et un esc Hk blue serie 30A.

j'en ai commande 8 pour mon mini octocopter FPV. merci HK.
Quality
Value
Overall
Quality
Value
Overall
I have 8 of these on an X525 converted to an X8 to compete my friends SkyHero Y6.
I also have three of them on an FPVlabs Tri-copter. Hundreds of flights, dozens of crashes and all are still running strong. Correctly rated and BALANCED props go a long way in reducing premature wear. Over propping any motor or having a too heavy craft will eat the bearings up. Go with 8x4's if you are running 4s, you will use almost 60pcnt less power than the 9x6 while only loosing .2kg of thrust. 9's are fine on 3S. I wouldn't put 10's on at all.
Another tip is to throw away the bullet style nuts and get some nylock nuts, the bullets are virtually impossible to balance.
Quality
Value
Overall
Quality
Value
Overall
Fantastic motors! They run cool even under a very high load, and are almost silent. Great set of motors for my quad(1-1.5kg)!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.