New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

NX-4008-620kv Brushless Motor Quadcopter

NX-4008-620kv Brushless Motor Quadcopter

Discontinued Product

Please continue searching for a similar product.
SKU:
NX-4008-620
WANT FREE SHIPPING? Click here to find out more!

Если вы серьезно относитесь к вашей работы счетверенных вертолетами, а затем смотреть не дальше, чем NX4008.
Построенный с высококачественными 45SH магнитами, рассчитывать высокий полюс и на заказ крепление двигателя, этот четырехъядерный двигатель предназначен исключительно для применения нескольких роторов.
NX-4008 включает в себя встроенный в проп заставки для реквизита типа GWS и встроенный в алюминии крепление для быстрой и легкой установки на вашем Quadcopter раме.

Это не modfied самолет скороход. Она была разработана с нуля для четырехъядерных вертолетами.

Спекуляции
Kv: 620rpm / v
Включает: 16T
Сопротивление: 0.129Rm
Холостой ток: 0.8A
Может Размер: 45мм
Может Длина: 14мм
Вал: 3мм (Включает Prop заставки крепление для реквизита типа GWS)
Похожие ESC: 30A
Номинальная Уоттс: 180W
Вес: 79g
Количество клеток: 3 ~ 4S LiPoly


Опора адаптера костюм 5 мм пропеллер

  • Артикул NX-4008-620
  • Brand -
  • Емкость ( мАч ) -
  • вес 99.0000
  • длина 160.00
  • Packaging Width 52.00
  • Высота 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I ordered 4 of these for a Crossfire 2 quadcopter. As another review says, the lack of screws was kind of annoying. These motors look beautiful on the quadcopter, have a lot of power and are easy to install once you get the M2.5 screws. I'm not sure about the price, maybe cheaper motors perform just as well, but I haven't tested anything else so I can't really comment on that.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered 4 of these for a Crossfire 2 quadcopter. As another review says, the lack of screws was kind of annoying. These motors look beautiful on the quadcopter, have a lot of power and are easy to install once you get the M2.5 screws. I'm not sure about the price, maybe cheaper motors perform just as well, but I haven't tested anything else so I can't really comment on that.

Have received my 4 engines today, and two were having problems with unglued magnet and two magnet brokens... Have to repair them without having seen them turn ! That's not a good way to have a good feeling... Please take care of that HK !!!
Engine bigger than attended but feel ok. Bearing seems tiny for such a big engine and 12' props, I have to take care of that. ESC to be soldered and tests to comes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have received my 4 engines today, and two were having problems with unglued magnet and two magnet brokens... Have to repair them without having seen them turn ! That's not a good way to have a good feeling... Please take care of that HK !!!
Engine bigger than attended but feel ok. Bearing seems tiny for such a big engine and 12' props, I have to take care of that. ESC to be soldered and tests to comes.

Great Motor See the Video:

https://www.youtube.com/watch?v=LBWlbGJWjpA&feature=player_detailpage

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Motor See the Video:

https://www.youtube.com/watch?v=LBWlbGJWjpA&feature=player_detailpage

I desperately need shafts and prop adapters for these. The ones that come with the motor are pretty fragile. I wish Hobby King would tell us which ones to buy. Or better yet, have an accessory kit for this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I desperately need shafts and prop adapters for these. The ones that come with the motor are pretty fragile. I wish Hobby King would tell us which ones to buy. Or better yet, have an accessory kit for this motor.

The propsavers that come with these are made from soft aluminium and are absolute rubbish. Two of them have snapped within two days, so now I can't fly at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The propsavers that come with these are made from soft aluminium and are absolute rubbish. Two of them have snapped within two days, so now I can't fly at all.

Bonjour, Je voudrais savoir si vous pensez que je peux utiliser ce moteur avec du 5S (18,5 volts) ? Par ailleurs est-ce que ce moteur peut entraner des hlices en 14"

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bonjour, Je voudrais savoir si vous pensez que je peux utiliser ce moteur avec du 5S (18,5 volts) ? Par ailleurs est-ce que ce moteur peut entraner des hlices en 14"

Very fragile, I wished the made it a bit heavier, and more robust. Well Balanced, but bad Bearings, need to be replaced soon. some run noisy out of the box. Shafts are quite soft, bend on any ground Contact.

Spare Shafts would be URGENTLY needet.

Also a good Motor for a FPV Pusher as it runs very smoothly. No good for Planes where the Prop easily touches the Ground, here this Motor wont make you happy. I use it on 4s with GWS 3Blade 1065 Props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very fragile, I wished the made it a bit heavier, and more robust. Well Balanced, but bad Bearings, need to be replaced soon. some run noisy out of the box. Shafts are quite soft, bend on any ground Contact.

Spare Shafts would be URGENTLY needet.

Also a good Motor for a FPV Pusher as it runs very smoothly. No good for Planes where the Prop easily touches the Ground, here this Motor wont make you happy. I use it on 4s with GWS 3Blade 1065 Props

Optical nice Motor good Magnets and electrical Data, but the Motorhousing is poor and rapidly bend.
the Bearings and the Shaft to small for 12" or 13" Propellers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Optical nice Motor good Magnets and electrical Data, but the Motorhousing is poor and rapidly bend.
the Bearings and the Shaft to small for 12" or 13" Propellers.

Multirotor motor with very good quality and price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Multirotor motor with very good quality and price

For $31 you would think they could have included some screws. Being M2.5 not M3, they are not exactly a common size.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For $31 you would think they could have included some screws. Being M2.5 not M3, they are not exactly a common size.

  1. 1
  2. 2
Customer files
SpacersProduction Download [68]
SpacersProduction Download [68]
FrameLayout Download [72]
SpacersProduction Download [68]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking