Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global

Бортовая Электронная свеча накаливания воспламенитель 1.5V 4A

Бортовая Электронная свеча накаливания воспламенитель 1.5V 4A

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

300,12 руб.
Stock:
Вес:
17 g
Артикул:
IGNIT-3A

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Это бортовое свеча накаливания воспламенитель идеально подходит для всех нитро- двигателей, если используется с переключающим устройством RC позволит свеча накаливания быть повторно обесточена при низких оборотах делает двигатель Сверхнадежный и более плавный ход на холостых оборотах, особенно хорошо на больше 4 тактные двигатели.

Устройство представляет собой компактный, легкий электронный блок, который требует 6 ~ 32V вход и выдает постоянный 1.5V на 4amps. Очень легко и просто, чтобы соответствовать, пожалуйста, прилагается инструкция по эксплуатации на вкладке "Файлы".

Особенности:
• Компактный и легкий
• Простота установки и эксплуатации
• Широкий диапазон входного напряжения

Технические характеристики:
Входное напряжение: 6 ~ 32V
Выход: 1.5V @ 4A
Размеры: 23x20x7.6mm
Вес: 8g

Product
Specifications

Дополнительная информация

  • Артикул:
    IGNIT-3A
  • Brand:
    Не применимо
  • Вес ( г )
    17.00
  • длина
    95.00
  • ширина:
    15.00
  • Высота:
    65.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Some nice circuit diagrams are there in Files tab, which would help you understand the product. I have added a switch and it comes on when the switch is on, doesn't stay on forever. that would be my recommendation
Quality
Value
Overall
Quality
Value
Overall
Input 6-32 volts ... not true,
this product does not work either 7.4 .. with 3 cell lipo lights ...
wrong information
Quality
Value
Overall
Quality
Value
Overall
Since the Version 4A quit heavy equipment. The 3A worked very well with 2S Life. Now I need at least a fully charged 2S Lipo (works only for a short time till the V drops down to ~7V) or a 3S Lixx.
Now I have to carry much more weight for the batterie .....

PLEASE change again to 3A...
Quality
Value
Overall
Quality
Value
Overall
Just got 2 of these, first I thought I was really unlucky in receiving 2 faulty ones, the plug would light if not screwed into the engine (holding against the engine case) but not actually in the engine (tested with amp meter), both ignitors were the same, I was using a fully charged 2S lipo battery so far exceeding the minimum required voltage of 6.0v!, it was only when I went to a 3S battery that everything started to work, it would seem that these 4A versions like a little more voltage than the older ones! Using on a 3S battery though they are great.
Quality
Value
Overall
Quality
Value
Overall
Ich habe 2 Stck davon. Beide funktionieren sehr gut. Beim Betrieb mit 2S (800mAh) Glht die Kerze mit der gleichen Farbe wie mit einer 1,5 Volt Batterie, dabei wird ca. 0,43 Ampere vom Akku gezogen. Beim Betrieb mit 3S (2200mAh) Glht die Kerze identisch und vom Akku werden ca. 0,24 Ampere gezogen. Je grer die Spannung, um so geringer der Strom. Eine tolle Sache, mit einem 3S-500mAh kann ich locker eine Stunde voll durchglhen (ich entlade ca. 50pcnt).
Man braucht halt noch einen Schalter, entweder nur zum Starten, oder um den Motor (Sprit mit wenig Nitro und 4 Takt) bei niedriger Drehzahl sicher am laufen zu halten.
Quality
Value
Overall
Quality
Value
Overall
that thing work great, I use one with 2 cell lipo and a electronic switch on the throttle channel , and other with a micro switch attached to the throttle servo with a plastic lever , went the servo go to lower throttle the lever turn the igniter on
Quality
Value
Overall
Quality
Value
Overall
This is an excellent product. It puts out a full 1.5V which is perfect for starting. I use my on board glow igniter in my field kit - supplied from a 3S LiPo. I have never had much success with the "Glow Stick" type of glow ignitor as they run at 1.2 V and are marginal with inverted motors which tend to flood the glowplug.
If you are into electronic brain surgery, you can "hack" the circuit board by removing the 5K resistor, and fitting fly leads to a variable pot. This gives you a variable voltage power supply eg 1V to 1.6V. Much more reliable than a conventional power panel, and less prone to blowing plugs. See Files for details of chip.
Quality
Value
Overall
Quality
Value
Overall
Nice piece of electronics for glow motors. Great price!



In combination with reciever switch you can turn it on or off via transmitter switch (free channel).



I replace aligator clip on positive side for cap with spring (look product: Remote Glow Plug Adapter/Lead).



Now there is no need for external glow igniter, when starting the engine...
Quality
Value
Overall
Quality
Value
Overall
Diese On Board Zndung fr Methanol Modelle funktioiniert gar nicht.
Hab's mit 12V versucht. Kein glhen der Kerze, keine Spannung. Kein Lebenszeichen... Schade.
This thing works not at all.. no glow, no Voltage, nothing... :-(
Quality
Value
Overall
Quality
Value
Overall
start igniter para manter a vela queimando
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.