OrangeRX DSMX DSM2 Совместимость 2.4Ghz передатчик Модуль V1.2 (JR / Turnigy / Таранис совместимый)

• Overall
• Quality
• Value

Gift

Nov 03, 2021

Gave as a gift

• Overall
• Quality
• Value

Works well with OrangeRx and Bind-and-Fly (BNF) + 9XR / 9XR pro

Jul 01, 2017

I've used this with the Turnigy 9XR and 9XR pro; it worked easily with the OrangeRx receiver.

I got it partly to use with the BNF Night Vapor (DSM2). It took me a while to get it working; the settings that ended up working with the 9XR pro were DSM2 mode on the module (switched from auto), and Proto PPM 8CH (default 300uSec, and changed to FrLen 32.5 though I don't know if that's necessary; it wasn't sufficient) on the 9XR pro. Initially, it would bind and control rudder/elevator, but the throttle wouldn't respond. My mix is ch1: 100% thr, ch2 -100% ail, ch3 100% ele.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 05, 2016

Perfictly fit The Turnegy 9XR Pro. Best for Usig with nano multirotors and flying wings. The range is not the best, but there are planty of receivers to choose from.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 21, 2016

I use it to control my sciscky (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=86503 with my Taranis. No problem works perfectly

• Overall
• Quality
• Value

Customer Rated

Jul 05, 2016

Perfect, worked with my taranis X9D and an inductrix after some parameter tuning
http://blog.matthew-evans.info/2016/05/20/orangerx-the-fix/

• Overall
• Quality
• Value

Customer Rated

Jun 30, 2016

Here are the settings I am using on my FlySky TH9X =
Single blinks - DSM2, 1024, 22ms - Lemon DSM2 reciever
Double blinks - DSMx, 2048, 22ms - Night Visionaire stabilized SAFE reciever
Constant ON. - Auto mode - Orange Stabilized receiver
These all work well, and I have not had to Re-Bind. Much better than the previous module, that you had to remove to change switch settings.

• Overall
• Quality
• Value

Customer Rated

Jun 28, 2016

arbeitet perfekt mit flysky 9 thx. passt genau und rastet super ein. binden kein problem mit orange empfänger.

• Overall
• Quality
• Value

Customer Rated

Jun 22, 2016

Of course the first thing I done right after I ripped this out of the box is take it apart... Unfortunately the screws are low quality and in tight so one screw instantly stripped and prevented me from getting the case open.It's a real shame because the rest of the device is good quality plastic case is solid and a perfect fit, and the soldering is top notch.

Main down side is the antenna position is downright stupid.It feels like it wasn't tested before release. When the antenna is attached, it sticks out so much you can't place your transmitter down without risk of snapping the cheap 3db antenna or the SMA connector. Hence why you might want to take the unit apart and wire your own antenna connection... To bad the screws are rubbish.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 20, 2016

Works with the Blade inductrix and scisky board. However I have to cycle power on the quad sometimes to get it to bind.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 14, 2016

Exclente modulo, trabaja perfectamente, un poco incomodo por la antena hay que tener cuidado de no lastimarla pero facilmente se puede adaptar con el transmisor para que salga por arriba