New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

OrangeRx R415 DSM2 Совместимость 4Ch Micro 2.4Ghz приемник

OrangeRx R415 DSM2 Совместимость 4Ch Micro 2.4Ghz приемник

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
Вес:
29 g
SKU:
R415
WANT FREE SHIPPING? Click here to find out more!

Совместим со всеми передатчиками DSM2.

Идеальный маленький foamie или закрытый приемник. Супер маленький и очень легкий!
Новый модельный ряд OrangeRx приемников построен с использованием оригинальных компонентов и устройства MCU и состояние автоматизации SMT искусства, чтобы обеспечить качественный продукт каждый раз.
Все приемники OrangeRx проверены QC прежде чем покинуть завод.
OrangeRx будет работать с любым совместимым DSM2 передатчиком 2.4Ghz

OrangeRx R415 4ch Микро 2.0G только в весе и 29x15x8mm размера. Отлично подходит для самолетов Micro, крытых foamies и небольших parkflyers.

Ключевая особенность.
Супер легкий 2.0g!
Напряжение: 3,6 ~ 9В
Совместимость с DSM2 1024/2048 самолета радио и модульных систем
4 канала
Компактная конструкция 29x15x8mm
Короткие 29mm антенны для монтажа практически в любом месте.
Micro Molex 3 Pin conectors с 1,25 мм Интервал между

В комплекте.
OrangeRx R415 4CH Micro DSM2 совместимый приемник

*Заметка:
1) Это не является продуктом Spektrum DSM2, и не является копией продукта Spektrum DSM2.
Бренд Spektrum и DSM2 является торговой маркой компании Horizon Хобби США.
2) Это не подземный черный рынок поддельные Spektrum продукт. Качество OrangeRx гарантировано.
3) Принят Maaa в Австралии, увидеть Maaa MOP58 для руководства

  • Артикул R415
  • Brand -
  • Емкость ( мАч ) -
  • Вес ( г ) 29.00
  • длина 59.00
  • Width 5.00
  • Высота 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.

small compact dsm 2compatible! im using it for small indoor toys

micro

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

small compact dsm 2compatible! im using it for small indoor toys

micro

Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.

Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.

A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.

Very good receiver, good quality....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good receiver, good quality....

bon produit rein a dire

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bon produit rein a dire

perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger

worked a treat but no leads available.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

worked a treat but no leads available.

This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
UserManual_DX6i_russian Download [1634]
Micro Extra 300 plans Enjoy! Download [641]
Pinout image for connection picture Download [77]
Pinout image for connection picture just Download [77]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save