Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA
  • Global

Ножной Банджи Запуск системы / пандус для FPV / Планеры / Light EDF Модели (самосборки)

Ножной Банджи Запуск системы / пандус для FPV / Планеры / Light EDF Модели (с...

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 507,51 руб.
Stock:
Вес:
1924 g
Артикул:
310000137-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Педаль самосборки Управляется Банджи Запуск системы / пандус для FPV / планера и EDF моделей - модели ручной запуск может быть непростым делом , и большинство листовок имели все пошло не так для них в какой - то момент, эта великая система запуска легко транспортировать и поле собрать и позволяет запускать полностью соло с душевным спокойствием адекватной скорости полета каждый раз, когда для успешного запуска, все, что нужно включено!

Размеры в собранном виде один раз:
Рампа Длина - 1060mm
высота в задней - 240мм
высота спереди - 460мм
ширина стартовых рельсов - 470мм

Материал:

Рампа - GF НКТ с пластиковыми столяров
Foot Launch System - слойный с хирургическим резиновым шлангом ( более 2 метров)

Product
Specifications

Дополнительная информация

  • Артикул:
    310000137-0
  • Brand:
    Нет
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    1924.00
  • длина:
    520.00
  • ширина:
    50.00
  • Высота
    170.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Unit was unable to be assembled. Apparently they changed to a thicker plywood but neglected to enlarge the square holes the pivot ears mount into. Either that or the kerf allowance is far off. Completely useless without spending an hour filing. I'll build from scratch in that case.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Update, I will load the picture of my finger to the files tab. Don't know if they will let me post it. WARNING! VERY GRAPHIC!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Please be very careful with this item! It does misfire often unless you modify it or create a safety device for the release. I had to go to the Emergency Room last night and have the metal ring that is the release ring to the foot pedal surgically removed from my right index finger! I was loading the jet onto the stand with the release ring on the post for the foot pedal, and being very careful because it does literally misfire twice as much as it releases an airplane, and it let loose. That metal ring, literally pierced through my finger and I had to run towards the large nail that holds the other end of bungee because it was trying to pull the ring out of my finger! The gap where to formed ring comes together is only as wide as a piece of paper, but some how that was enough to grab a piece of my skin, and it pulled itself right through one side of my finger and out the other side! I sure wish I could post the pictures on this review! it is a very graphic picture but it sure would make HK rethink the design! This device needs to be modified like the other review to make some what safe for use! I'm 40 years old and have been in modeling for many decades. This thing is dangerous!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Here's the short review: Best catapult you can buy for 22 EUR. More details: Works reasonably well, I'd suggest a few modifications. Use LOTS of superglue on all frame joints. tie the release plate to the bottom of the fiber glass pipe, not the top. Use a dremel or metal saw to roughen up the pin in the release mechanism, it is really slick. Use a small key ring to hook in your plane. Make sure that the hook is glued VERY securely, due to the catapult's design, the full draw force of the sling rips into the plane. For a Radjet 800, I used about 7m of draw length -> Get a longer rubber if you don't have impressively good reflexes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Vorweg, mit 20 kann man hier nichts falsch machen.
Wie aber leider schon angesprochen, fehlt es an einer Anleitung.
Das ist beim Bau nicht so tragisch, aber bei der Inbetriebnahme schon.
Man weiss erst nicht, wie man das Seil und das Gummi verbinden muss, auch nicht welche Lnge man braucht, wenn man ein strkeres Gummi nimmt.
Hat man dies einmal raus geht es eigentlich ganz gut.
Die Halterung am Flugzeug ist etwas schwerer.
Bei meinen ersten Versuchen, zog das Gummi den Flieger wieder zu Boden.
verified_user Quality