Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Красный лебедь Лазерная резка бальзы KIT 1250мм (Kit)

Красный лебедь Лазерная резка бальзы KIT 1250мм (Kit)

Now save сэкономь 0,00 руб. 0,00 руб.

1 989,55 руб.
Нет в наличии!
Stock:
OUT OF STOCK
Вес:
935 g
Артикул:
099000032

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
servo
motor
acc
Описание
товара

Вот еще один отличный доступный немного бальзы комплект для традиционного R / C хобби и строителя, который любит строить модели из формы набора.

Red Swan является все застроен, 4 канала, электроприводом парк муха планера. Он имеет острые точные лазерные срезанные части, которые просто слот вместе с небольшим количеством суеты и крыло выглядит фантастическим, когда покрыты прозрачным покрытием, чтобы показать конструкции.

Система питания может быть простой небольшой скороход и 2s батареи, с помощью микро сервоприводы, чтобы держать ее красиво и свет.

Полученная модель является большой маленький парк летать электрический планер, который хорошо работает, имеет элеронов / лифт / руль направления / управление двигателем, но является достаточно жестким, чтобы справиться с нечетным "упс!" момент от начинающих летчиков и достаточно компактны, чтобы быть легко транспортировать.

Технические характеристики:
Span: 1250m
Длина: 810mm

Требуется:
4 Система радиоканалу и 4 х микро сервоприводы
1550kv 15amp Outrunner
15Amp Esc
2 или 3s 1300mAh батареи Lipo
Гребной винт (8 х 4)
CA клей
Покрытие пленки
Основные инструменты хобби (нож, наждачная бумага и т.д.)

Построить руководство, перечисленные на вкладке "Файлы" ниже

Product
Specifications

Дополнительная информация

  • Артикул:
    099000032
  • Brand:
    Нет
  • Вес ( г )
    935.00
  • длина
    800.00
  • ширина:
    70.00
  • Высота:
    140.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little kit for the money. need a bit of experience to build it. instructions a little bare to say the least!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fantastico, ne ho presi 2 a magazzino e uno sempre con me, 1400k lipo 1500-1600 prop 9*4
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This kit is THE kit for those who love the old school balsa kit..
Wood is good in general and laser-cut parts saves valuable time.

That said, this is not for beginners, the building notes are nonexistent and it is necessary to go on the net to find build logs, fortunately quite numerous.

I just have two disappointments, after assembling and flying with the Red Swan:
First, it is quite heavy. Ready to fly weighed approx 700gr.
For a wingspan of 1224mm he had to fly fast enough to generate the necessary lift.

Then, the weak point is the horizontal stabilizer. It is very close to the ground and the landing must be perfectly horizontal on a very flat surface. The slightest clod of dirt or grass can easily pull the horizontal stabilizer off.
This happened to me twice. The first time the tail has been torn, I rebuilt the entire tail section in plain balsa, much stronger.
Alas, he clung to a clump of grass and the section of the fuselage near the tail (with holes for pushrods) broke ... :(

That said, it's a nice old school kit for a handyman with experience and a good flat ground for landing.

I posted 3 pictures of my Red Swan ( The under files section Cardinal ) just before the maiden flight
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
NIcely cut kit. A lot of fun to build, and they look great when complete. I wish hobbyking would stock more laser cut kits.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fine construction, precise laser-cut parts, but wrong building instructions:
First, the 2 fuselage sides must be prepared with strengthening sticks first, then glued together with bulkhead parts, servo tray and motor mount in one step to avoid distortion!
Second, the order of wing ribs is wrong in the picture as well as in text part 2.02. Correct is 6 pc. B3 in the middle, then on each side one pc. B4, 5 pc. B5, each parted by a pair of B7 glued at both sides of the balsa spars, finished by one pc. B6. The construction should be done on a board using needles to fix the parts, thus obtaining a straight wing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fine parts, fitting well, but:

Wrong instruction manual!

The two sides of the fuselage must be built symmetrically without yet glueing the bulkhead parts, the motor mount and the servo base. Only when finished, both sides and the mentioned parts must be fitted together in one glueing step.

Otherwise the fuselage will turn out rather distorted!



Second mistake: the denotation of the wing ribs in the picture of the middle wing part and in textpassage 2.02 is wrong. As there are only 2 ribs B4, but 12 pc. B5 and 4 pc. B6, the correct order must be:

6 (or 8? There are 8 pc.!) ribs B3 in the middle, then, spaced by B7, one rib B4, followed by 5 pc. B5 on each side, each spaced by one B7 part, and one B6 rib to strengthen the edges.

The other two B6 should strengthen the edges of the outer wing parts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Soft package, no cover film, no plans.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I missed drawing, so I draw him, I upload to files.
Servos will use HXT500.
Motor temporarily 24 grams hexTronik Brushless Outrunner 1300kv.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First flight today with a 2822/17 3s and 8*4 prop. Good 3 axes glider slow rolls, loops, inverted flight. Can be used by a beginner (but foamies will be much more crash rsistant...). The manual is really not here to help and 9 gr servos are too big for the ailerons. I have also replace the supplied leading ege of the wing by a carbon fiber tube 3mm. Despite the inexisting and wrong manual, we had good time with my son building this kit and at the end.... Good surprise....great flying capacities!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So much potential ruined by horrible plans. I'm about 2/3 done and am looking forward to flying it. Search for my build thread on RC Groups . Com for build information. It's been a fun build so far (other than the lack of instructions). Wood quality is decent but heavy, packing is good, and fit of the laser cut parts is ok.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
servo
motor
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.