New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

RS540-35T Brushed Motor

RS540-35T Brushed Motor

Discontinued Product

Please continue searching for a similar product.
Вес:
243 g
SKU:
9368000063-0
WANT FREE SHIPPING? Click here to find out more!

RS540-35T щеткой двигатель не является Geat, не нонсенс решение для питания вашего автомобиля или лодку.
Необходимо использовать с подходящей щеткой ESC (смотрите соответствующие пункты ниже.)

Особенности:
• Сменные щетки
• поставляется с предварительно установлены конденсаторы, чтобы помочь устранить нежелательные помехи радиосвязи.

Технические характеристики:
RPM: 12500 /7.2V при отсутствии нагрузки
Нет ток нагрузки: 1.8A
Размер вала: 3.175mm
Вес: 162g
Размеры: 36 х 53мм

  • Артикул 9368000063-0
  • Brand -
  • Вес ( г ) 243.00
  • длина 105.00
  • Width 45.00
  • Высота 75.00
  • Kv ( об / об) 1736.00
  • Max Токи (A) 0.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 0.00
  • Мощность (Вт ) -
  • Вал А ( мм) 3.18
  • Длина В ( мм ) 53.00
  • Диаметр С ( мм ) 36.00
  • Может Длина D (мм ) 0.00
  • Общая длина E (мм ) 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The motor looks nice, specs are nice, price is OK.

Received it a couple of days ago, went into my Vattera TH. Before I had Hackmoto 45t in, wanted some more speed from it.
Hackmoto 45t was a bit more expensive, no condensers, no wires.

So, HK prepared motor to be usable out of the box. I did a break-in procedure on low RPM in water. Water got black in 5 minutes...

Opened the motor and found out that brushes are 30pcnt shorter than competitor, made only of graphite (not copper/graphite sinter mix)

Housing for brushes made of nickel plated steel opposed to copper made from Hackmoto, so lower conductivity, lower heat conductivity from brushes, all contributing to shorter lifetime.

Main shaft is ball bearing and runs quiet.

It also handled 3S until now, a bit hot.

OK for price
OK for quality
OK for value.

Could be worse, could be better. Your choice what works out for you best ;-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor looks nice, specs are nice, price is OK.

Received it a couple of days ago, went into my Vattera TH. Before I had Hackmoto 45t in, wanted some more speed from it.
Hackmoto 45t was a bit more expensive, no condensers, no wires.

So, HK prepared motor to be usable out of the box. I did a break-in procedure on low RPM in water. Water got black in 5 minutes...

Opened the motor and found out that brushes are 30pcnt shorter than competitor, made only of graphite (not copper/graphite sinter mix)

Housing for brushes made of nickel plated steel opposed to copper made from Hackmoto, so lower conductivity, lower heat conductivity from brushes, all contributing to shorter lifetime.

Main shaft is ball bearing and runs quiet.

It also handled 3S until now, a bit hot.

OK for price
OK for quality
OK for value.

Could be worse, could be better. Your choice what works out for you best ;-)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save