S-Pro FP II 2.4Ghz Micro Heli Bind - & - Fly V2 (хели только)

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 06, 2013

Flies better than my 1st one and I has survived I would say 50plus crashes some light and others kinda rough. Had it for 3 weeks. Broken the tail in a very hard crash and thankfully I had the 1st one to swap parts. If you can buy another 1. To keep as parts or another heli. It only crashed because of not enough room or the wind was too strong and it went crazy. Not the best under even decent winds. There needs to be very little winds is less than 2 mph

• Overall
• Quality
• Value

Customer Rated

Mar 27, 2013

This heli is an absolute joy to fly, but....there is a warning: DO NOT INSTAll BATTERIES IN REVERSE! Forcing incorrect batteries will damage the MCU/5-in-1 instantly. I used a hobby knife to, carefully, reverse the wires on the MCU's battery connector. I also use a hobby knife to remove the limiting tabs on the L/G battery connector. This allows all Twin Rail and Single Rail 2010 batteries, with the rails removed, to fly the Solo Pro. I can understand if different manufactures use different battery connector polarities; but, for the same manufacturer to do so is ridiculous! 5 Stars for an awesome heli....Minus 1 Star for the reverse polarity.

• Overall
• Quality
• Value

Customer Rated

May 28, 2012

Very Nice little heli. But undercarriage breaks easily. Important Spare parts are always in backorder.( like tailboom)
I bought mine last year, but now they don't sell it any more to Europe!
Wanted another one.
HK: why do'nt you sell them anymore to Europe?

• Overall
• Quality
• Value

Customer Rated

Apr 05, 2012

Bought one along with a bunch of bats. Expected to be able to bind to my Solo Pro 328 TX. Now customer support tells me that the only TX that it will bind to is the TX that comes with the RTF version??? Not sure why they offer this BNF other than for parts...

• Overall
• Quality
• Value

Customer Rated

Mar 06, 2012

P-51 Mustang Ultra Micro 4CH 400mm (RTF) (Mode 1) Nine Eagle transmitters in here and Bind-n-Fly heli only set for Solo-Pro I & II systems compatible, does it work?

Please understand English very well, forgive

• Overall
• Quality
• Value

Customer Rated

Feb 23, 2012

This is my second Solo Pro, my first I ordered with the TX as a full kit. The helo basically flew straight out of the box. It flew for several months before it was destroyed by my wife's cat.
So I ordered this as the replacement. This came with the balance bar missing the weights off one end, only noticed it when I fired it up and it nearly shook itself to bits, luckily I had kept the old Solo Pro for spares, so after 10mins away it went.
HK please check your goods before sending.

• Overall
• Quality
• Value

Customer Rated

Jan 27, 2012

The bird it's self is a good bird, my board went out in my other one so I got this one expecting a fully BNF experience. The box looks like it went through hell getting here, not sure who's fault that is, but the tail blade was missing from the bird, and the motor shaft looked short. I found the blade, and what do you know, the shaft is inside of the blade >.<.
Great heli, horrid packing, still waiting on them to tell me what they are going to do about it.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 07, 2011

good heli is for new pilots

• Overall
• Quality
• Value

Customer Rated

Dec 04, 2011

Bonjour,
J'utilise le solo pro depuis plusieurs mois et j'en suis trs satisfait.
J'utilise la radio de mon Kestrel 500 du mme fabriquant qui est parfaitement compatible.
Le rapport qualit prix du Solo PRO est impressionnante et n'a, ma connaissance aucun gal.
J'ai du changer la carte lectronique qui a crame sans explication et acheter des batteries supplmentaires car elles sont mortes apres une cinquantaine de recharges.
Bilan positif malgr tout

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 19, 2011

Great flying micro heli. One of the best for learning to fly helis or just practice around. My first sample flew away due to student error so this is my replacement unit.