Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

Sbach 342 Масштаб Пилотажная Самолет EPO 1100мм (ПНФ)

Sbach 342 Масштаб Пилотажная Самолет EPO 1100мм (ПНФ)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

8 189,81 руб.
Stock:
Вес:
2800 g
Артикул:
043000011-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

XtremeAir Sbach 342 является немецкий высокопроизводительный двухместным пилотажный и универсал моноплан разработанный Philipp Steinbach с Альбертом Милия и построен XtremeAir GmbH из Hecklingen.

Sbach 342 имеет композитную структуру и питается от 315 л.с. Lycoming. Работая ранее для Walter Extra разработки Extra серии пилотажных самолетов, Штайнбах собрав современные материалы, многолетний опыт работы и оптимизированный дизайн Объединяя мир один из самых гибких пилотажных самолетов когда-либо.

Наш Sbach 342 выходит из коробки в вилке и летать конфигурации. Все поверхности предварительно откидное, просто нуждаются некоторые незначительные сборки и установки приемника, чтобы быть готовым к полету. Доступ к батареи супер просто через входной люк в верхней части фюзеляжа, который имеет удобные маленькие пластиковые шнапс. Передний обтекатель и нижний люк приемника имеют те же самые быстрые снимки, а также. Крылья 2-х частей плагин дизайн означает, хранение и транспортировка принять минимальный номер. Полный пакет аппаратного обеспечения с обширным декальной листа завершают модель.

Полет Sbach является реальное удовольствие. Мощный 4023 1000kv двигатель тянет его через все ваши любимые manuevers. Это очень жесткая модель с достаточной массой, чтобы довести его до конца manuevers плавно, не носятся, как какой-то легкий вес foamies сделать.

Особенности:
• Подключи и лети - Просто добавьте ваш выбор батареи, передатчик и приемник
• Литой EPO планера
• 2 шт сменные крылья
• Прочный алюминиевый шасси
• клобук, батареи люк и приемник люка крепится с помощью быстрой защелками
• Достаточной мощности и экстремальные характеристики полета

Технические характеристики:
Размах: 1100мм
Длина: 1115mm
Полетный вес: 1100g
Двигатель: 4023 1000KV бесщеточный
ESC: 40A ESC
Сервопривод: 4 х 17г

Необходимые:
4 CH передатчик и приемник
LiPoly батареи 3S 11.1V 2200mAh

Product
Specifications

Дополнительная информация

  • Артикул:
    043000011-0
  • Brand:
    Нет
  • Вес ( г )
    2800.00
  • длина
    980.00
  • ширина:
    240.00
  • Высота:
    380.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Sbach 342 PNF 1100mm is certainly not for beginners or even intermediate flyers.

This model has taken a bunch of hits during the maiden / setup process. I will give it credit for being reasonably easy to repair the fuse, however is definitely needs a spar running lengthways down the fuse to address the weak point at the landing gear.

Definitely an unforgiving model with regards to CG, make sure you mark the CG points (90mm behind leading edge at cockpit) and get the balance right before attempting flight to save yourself alot of heartache.

I ran dual rates with 40pcnt throws and 70pcnt expo for low, and 100pcnt throws and 70pcnt expo in high and still found it to be plenty responsive.

I recommend hinge tape or Pivot & round Hinges (http://www.hobbyking.com/hobbyking/store/__8280__Pivot_Round_Hinges_2_5x43_10pcs_.html) on the elevator / rudder as the foam hinge didn't last more than 30mins flight time.

All in all it flys beautifully once you get it right and has plenty of power (I'm using 3s1p Turnigy 2200's happily), but be prepared to repair and replace parts during the maiden process.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Waste of money, very poor finish and build quality, missing screws. Starting building it before realizing what rubbish it was so it was too late to return it. I would not recommend this product. I am very disappointed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Haven't flown yet but finished putting together. Some servo horn screws were missing, but I had some on hand. 4 screws for mounting the wings were too short but found some at local stines , found some 3mmx50mm that worked. I also had to put servo extension leads on wing servo's because I am using separate channels for them. A y lead was included that will work fine if you are using one channel for the wings. Tail section seems a little flimsy because only 2 small screws hold the horizontal and vertical together. I will probably epoxy the section together after I test fly, it should be fine. Everything else seems to be good, except I'm not that good at putting all the decals on, took me a couple of hours just for that. For the money it's a nice plane and should fly great. I really like the cooling design that runs in from engine cowl and exits through mid tail section. That should keep the electronics cool.


verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a Volantex product. The plane looks nice and flies ok, but the left wing is missing the spar tube!!! had to heat up the metal spar and make my way in the foam wing core.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sbach 342 PNF 1100mm Foam was not straight anywhere nothing lined up including elevator and the rudder wasn't anywhere near straight I've got plenty of hobbyking models but this one was the most disappointing. Also lost the battery hatch first flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well it look good so far but it did not come with a rubber and tail parts now I'm looking to make one or if I can get one sent to me I wish I can fly it but it's looking like I just payed $298.00 for 3 batterys and a rubber less airplane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice looking model - decal cutting is a bit of which is a shame - almost better if they didn't cut - I modified the rear servos (removed mount, moved one up and the other down) so only the horn sticks out to make the thunderbolt decal tidier. Model looks good - fittings are poor though as tail screws supplied didn't fit so I glued the tail on and only one wing had the fittings to accept the wing bolts
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice plane!!! Installed Turnigy 17g mg servos flies on rails,3d. Epoxy together and Fly. Stop Whining about the basics of putting a plane together!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Sbach 342

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.