Servo Маунт (5шт / мешок)
Подходит для типа серво Mini 9g, до 24 мм длина корпуса
Вес ( г )
So-and-so quality, frame bends easily. Bought a set just to check them out, not sure if I will use them. There are short soft pins that intend holding the servo through the servo mounting holes. Due to the flexing and the softness mounting doesn't seem as reliable as gluing the servo in place. Won't buy again.What a nice solution!! I think i need more of this...
No more considerations to mount a servo!! I like it.
Do not forget the other quantities that are available.These are a great idea. I now fit these in 1/16th scale hydroplanes using 9gm servos.Many are suitable for mounting servos in the wings of gliders.Great Mount, hard staff!!Fantastic 5-star product, I use it all the time. Nice shiny finish, good to hold in my hand. You can be sure i'll buy more soon.This is what i searched for a long time (didnt find the correct category / Name for search for) this things are very well made. I use them to put a servo under the wing of the J3 Cub for a aileron mod. Since the wing is to small to cur out the material, i use them in diffrent way and add the servo to the spot under the wing without cutting some material out. since its only an area of 25x20mm there should be no problems with airflowI am not sure if this servo mount is helpfull at all. Parts are just not precise enough. Once you put there servos the whole structure bends and there is a lot of "dremel" work, which is also problem due to the quite used material. So finally it might be more efficient to just use a wooden block as in the past.
I finally use those in my Ocelot-E (4-servos wing), but it was really painfull experience.these really do fit hxt900 and similar servosJust the screws to hold the plastic mount are missing.