The Sopwith Camel was a British WW1 single seater fighter and first saw service at the Western Front in 1917. It was manufactured by the Sopwith Aviation Company and used a rotary aero engine and had twin synchronized Vickers machine guns firing forwards through the propeller arc. Though difficult to handle it was extremely maneuverable in the hands of an experienced pilot and was credited with shooting down 1,294 enemy aircraft, this was more than any other allied fighter.
Our model captures the very essence of this formidable WW1 fighter, it has an open framework structure built from balsa and hardwoods and has a glass fiber radial cowl with plastic molded dummy rotary engine and authentic looking rigging wires. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. Also included is a plastic molded cockpit surround with simulated padded cockpit coaming and left and right-hand front plastic molded fuselage fairings which simulate the aluminum side panels on the full size aircraft. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars and joiners plus a comprehensive hardware pack that includes rigging wire, nuts and bolts, servo horns, rods and connectors etc.
The Sopwith Camel has been designed to use either a 35 or 42mm 500~600 watt electric outrunner brushless motor on a 5~6S lipo swinging a 14~15 inch prop or the equivalent gas/nitro engine. 4 standard size servos are more than adequate for the control surfaces.
Overall this is a fantastic kit and due to its ease of construction, it is perfect for the seasoned builder or those with limited building experience. Once finished in an authentic textured covering such as antique and olive drab Solartex and the addition of scale accessories such as a pilot and machine guns this Camel will really look the part and will turn many heads attacking the Hun at your local flying field or RC flying club.
• Laser cut parts for accuracy and ease of construction
• Carbon spars and wing tubes
• Glass fiber radial cowl
• Plastic molded cockpit surround and side fairings
• Authentic rigging wires
• Comprehensive hardware pack
Fuselage Length: 1020mm
Flying Weight: 2700~3300g
Motor: 3530~4250 or gas/nitro equivalent
ESC: 40~60A suitable for up to 6S
Propeller: 14~15 inch
Battery: 2600~4000mah 5~6S
1 x 3530~4250 Brushless outrunner motor or gas/nitro equivalent
1 x 40~60A 6S electronic speed controller
4 x 17~40g servos (5 required if using gas/nitro engine)
1 x 14 or 15-inch propeller
1 x 2600~4000mah 6S LiPo battery
Textured covering material
Assorted hand tools
See under the "Files" tab for a copy of the manual.
Вес ( г )