Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Целевой показатель Дрон Стекловолокно FPV платформы 1520mm (ARF)

Целевой показатель Дрон Стекловолокно FPV платформы 1520mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
1450 g
Артикул:
189000058

Combine

essential items and
esc
battery
servo
motor
acc
Описание
товара

Target Дрон отличная маленькая FPV платформа, которая была специально разработана для работы, а не только набор дешево купить, это отличная маленькая модель также дешево, чтобы получить в воздухе.

Target Дрон оснащен FG фюзеляж, который открыт на передней панели для монтажа камеры, есть также встроенный антибликовым покрытием. Модель предназначена для толкателя двигателя, как и следовало ожидать, и он также имеет середине смонтированы, большой люк для батарей и оборудования доступа, большие и открытые части фюзеляжа площадь не только имеет достаточно места для вашего FPV оборудования и LiPoly, он также обеспечивает много батареи и ESC охлаждения от открытой передней части фюзеляжа. Под подъемником надежен, показывая винт в сплав нога сзади и рулевом колесе нос впереди.

Target Drone является довольно быстро построить, серво удлинители предварительно установлены в бальзы крыла, который установлен на CF стержня и эпоксидной смолой на место. Входящий в комплект аппаратных средств comprensive и низкое количество общие части, то есть вы будете испытывать FPV в двойном быстром времени. Target Дрон, с его tailess, стреловидным крылом является одним из самых необычных и интересных моделей EP FPV в своем классе до сих пор и, несомненно, привлечь внимание людей туда, куда он летит!

Особенности:
Прочные FG Фюзеляж
Открыта передняя камера крепление с антибликовым покрытием Обложка
Большой установленный серединой доступа Hatch
Бало Изготовленные Wing & крылышками
Прочные под подъемником
Steerable носовым колесом
Уменьшению количества компонентов
Все Включено Оборудование
Толкатель Конфигурация

Технические характеристики:
Размах: 1520мм
Длина: 500мм
Полетный вес: 500g ~ 700g
Площадь крыла: 17.2dm2
Нагрузка на крыло: 29g / дм2 ~ 40.6g / дм2

Требуется:
Ваш собственный 4 ~ 6-канальный TX / RX с ЭЛЕВОН Смешивание
28-36 Brushless Походный Мотор 1800kv
3 х 9g Servo
30A ESC ж / BEC
Батарея 1300mAh ~ 2200mAh 3s LiPoly
FPV оборудование

Product
Specifications

Дополнительная информация

  • Артикул:
    189000058
  • Brand:
    Не применимо
  • Вес ( г )
    1450.00
  • длина
    850.00
  • ширина:
    140.00
  • Высота:
    180.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The plane flies very well, if you set the correct CG. (250mm from the rear edge) The downside - very heavy landing gear. Buy the right carbon 120mm height. Fold back the front landing gear, otherwise it will tear off landing))) Good luck!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Its very small and looks crap. I dont know how you fly this thing. You can probably build something like this at home.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Target Drone flies :-). And its very fast. Quality is good, but neet to be sreghten Nose Wheel. Hers My maiden flight video - http://www.youtube.com/watch?v=DsXqzUnCIgg&list=UUgu1IJ5NXcCydNS76izSDDw&index=1&feature=plcp
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The target drone does fly it does require quite a bit of work to get it into the air with setting of wing incidence twisting of the wings and recalculating the CG. With the wing design it flies quite fast. I have been working on this now on and off for two weeks and will have another test fly this week-end. What is needed is at least another Target drone to optomize the the wing incidence and CG settings so that I can have confidence in the final setup. For those wanting to experiment the starting point is as follows: wing incidence 2 degrees positive at root - wing twisting to Zero degrees at tip, CG 125 - 128mm behind leading edge at root.



Good Luck

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The good: Quality and Value exceptional - Mine arrived well packaged with no damage, the plane went together well, and apart from a bit of mucking around on the nose wheel it was really good. I beefed up the nosewheel and the fiberglass around the wing mounting and glued the wings in. Was planning on mounting the motor internally however there wasnt enough room to play with installing it. Installed recommended motor, 45A ESC and micro servos as well as FPV pan/tilt camera setup and tx.
The Bad: 3 failed attempts at maidening this plane, have tried the middle of the recommended C of G as well as both extremes and every time it lunged vertically on take off, stalled, and then fell on its back.

If this plane flew and was stable it would be a solid 5/5 but until that time it is completely unflyable. Hopefully someone gets this sorted and can report on the right C of G, until then mine will be gathering dust which is a shame for such a nice looking model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really catch looking model, but not for beginners. Would be nice to have the front wheel hole pre-drilled. Wings have to be glued on.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
not bad but a little week in the front and the wheal will fold on landing . , all out ,difficult to use as a reliable FPV ,and is not a slow plane.,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received mine in good condition.
No instruction on where the CG should be.
Based on CG calculator about 188mm from front leading edge.
Nose heavy with 2200 3S lipo.
Ready to maiden, but i think I will need the flight stabilizer to maiden it.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is just a manufacturing and packaging review... I still have to fly it.



1 stars, both wings have the tip bumped and there is also some bump here and there in the top surface.



One wing has the hole for the carbon rod closed by excessive glue usage (I will have to drill it hoping that there is not glue also deep inside the hole where my drill can't arrive).



The place for carbon tube inside the fuselage is not aligned with the fuselage and the right is lower than left and anyway it's also too large for the carbon rod, there is a lot of play. wings won't be solid with the fuselage.



There are no air scoops for motor/esc ventilation.



Will post more once the airplane is ready and maiden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
buen producto, plusplusplusplusplus
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Target Drone

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.