The ToolkitRC M6D is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, and smart consumer-grade drone battery charging, it also has a multilingual user interface. The M6D is a DC unit only, so requires an input voltage of 7~28V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 30A.

The M6DAC is capable of charging two batteries at up to 250W each, or, if both channels are used, in the synchronous mode for one battery pack, then it can charge the pack at up to a very impressive 500W. A wide variety of different chemistry batteries can also be charged on the M6D, these include, LiPo, LiHV, LiFe, and Li-ion @ 1~6S, NiMh @ 1~16S, and Pb @ 1~10S.

The M6D is simple and straightforward to use, it has an easy-to-read, wide-angle, back-lit, IPS 2.4"x320x240 pixel full-color LCD screen, simple to use metal, menu scrolling/enter wheel, and a ch/exit button. Ports include an XT60 DC input socket, and outputs include 2 x XT60 charging ports, 2 x 2~6S balance ports, a temperature sensor port, and a USB output/upgrade port. When required, the powerful, intelligent, high-flow cooling fan cuts in at half speed when internal temperatures of the charger exceed 45°C, this will then switch to full power when temperatures exceed 53°C.

The ToolkitRC M6D dual battery balance charger/discharger is a must for every modeler due to its compact size, incredible charging power, and its easy-to-use, intuitive programming menus.

Features:
• Will charge two battery packs simultaneously, and independently, regardless of chemistry
• Synchronous mode allows both channels to be used to charge one battery at up to an impressive 500W
• Multilingual user interface
• Ability to smart charge consumer-grade drone batteries such as those used in the DJI Mavic, Phantom, and Inspire
• Easy-to-read, wide-angle, back-lit, IPS 2.4"x320x240 pixel full-color LCD screen
• Firmware can be upgraded via the USB socket

Specs:
Type: ToolkitRC M6D Dual 1~6S 15A 250W DC Balance Charger/Discharger
Input Voltage: 7~28V DC
Charging Power: 2 x 0.1~15A@250W
Synchronous Charging Power: 1 x 0.1~25A@500W
Discharge Power: 500W@25A max (recycling)
Discharge Power: 250W@15A max (normal)
Balance Current: 800mA@2~6S
Battery Types: LiPo/LiHV/LiFe/Li-ion@1-6S, NiMh@1-16S, Pb@1-10S
USB Output: 2.1A@5V, Upgrade@USB3.0
Display Screen: IPS full color, wide angle, backlit, 2.4"x320x240 pixel LCD
Internal Resistance Measuring: 1~100mR@1~6S
Dimensions: 98x68x35mm
Weight: 220g

Please note: A copy of the user manual which includes a full list of all the functions is available under the "Manual/Files" tab above.