The ToolkitRC M8S is a versatile, multifunction tool that integrates functions such as charging, discharging, resistance measuring, signal test/signal source for servo, and receiver testing, PWM/PPM/SBUS, ESC watt meter, smart consumer-grade drone battery charging, and so much more. The M8S is a DC unit only, so requires an input voltage of 7~30V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can be connected to a mains power supply that can supply the correct DC voltage, and a current of 18A.

The M8S can charge a wide variety of different chemistry batteries at up to 400W@18A, these include, LiPo, LiHV, LiFe, and Li-ion @ 1~8S, NiMh @ 1~20S, and Pb @ 1~12S. It is simple and straightforward to use, has an easy-to-read, wide angle, backlit IPS 2.4"x320x240 pixel full-color LCD screen, an easy-to-use rotary/press knob for selecting parameters, and an exit button. It has a DC XT60 input socket, and its outputs include an XT60 charging port, a 2~8S balance port, a USB port, and a signal port. When required, the powerful, intelligent, high-flow cooling fan cuts in at half speed when internal temperatures of the charger exceed 40°C, this will then switch to full power when temperatures exceed 50°C

The ToolkitRC M8S multifunction balance charger/discharger is a must for every modeler due to its incredible versatility, and its easy-to-use, intuitive programming menus.

Features:
• Ability to charge at up to 400W, and up to 18A
• Multifunction charging tool that includes a battery re-cycler, and signal tester for PWM/PPM/SBUS
• Ability to smart charge consumer-grade drone batteries such as those used in the DJI Mavic, Phantom, and Inspire
• Full color, wide angle, backlit, LCD screen
• Rotary knob for easy setting of parameters
• Watt meter function for testing ESCs

Specs:
Type: ToolkitRC M8S 1~8S 400W 18A DC Multifunction Balance Charger/Discharger
Input Voltage: 7~30V DC
Charging Power: 0.1-18A@400W
Discharge Power: 400W@18A max (recycle mode)
Discharge Power: 15W@3A (normal mode)
Battery Types: LiPo/LiHV/LiFe/Li-ion@1-8S, NiMh@1-20S, Pb@1-12S
Balancing Current: 800mA@2~8S
ESC Testing: 400W@18A (PWM output)
Internal Resistance Measuring: 1~99mR@1~8S
USB Output: 2.1A@5.0V & upgrade
Display Screen: Full color, wide angle, backlit IPS 2.4"x320x240 pixel LCD
Over Current Cut-Off: 50ms
Dimensions: 98x68x35mm
Weight: 170g

Please note: A copy of the user manual which includes a full list of all the functions is available under the "Manual/Files" tab above.