Показать : ВСЕ КАТЕГОРИИ 9 Энергетические системы 891 Радиоусилители 378 Аксессуары для сервоприводов 87 Сервоприборы 1

ToolkitRC ST8 Advanced Multiple Servo Tester and Data Analyzer

ToolkitRC ST8 Advanced Multiple Servo Tester and Data Analyzer

Цена:

Now save сохранить 0,00 $ 0,00 $

54,99 $

Уже купили Discontinued Product

Please continue searching for a similar product.

1 year warranty

Артикул:

9914000085-0

Хотите бесплатную доставку? кликните сюда Узнать больше!

Поделитесь ссылкой с друзьями и заработайте бонусов () [ ? ]

Описание продукта

The ToolkitRC ST8 Advanced Multiple Servo Tester is a servo tester like no other. It has an amazing number of features that are usually reserved for the best professional test equipment. It can run 4 servos independently, or it can control 8 servos from a single input. Servos can be controlled using pre-set control modes, or even more accurately via the manual scroll wheel. Servos can also be driven from an external input signal, with support for PWM, PPM, or SBUS signals.

There are various measurement modes available, these allow you to test things like the response speed of servos and current draw. Current draw is a very useful piece of information to have as you can then be sure your BEC system has sufficient power to supply the required servo load. Also, it will show you for example if there is a high current load caused by a sticky control surface or a tight pushrod. All this information is clearly visible on the 2.4" TFT RGB 320x240 resolution LCD display.

The ST8 can handle an input voltage of anything from 7~28V, this is connected to the tester via an XT60 socket. The servo tester then powers the servos, and the output voltage can be adjusted from 5~28V to suit standard and high-voltage servos.

Features:
• Data analyzer, 8-channel signal output, current measurement, curve display, and other functions
• Multiple measurement modes, speed/count/step/linear
• Supports input signals PWM/PPM/SBUS to an accuracy of 1ms
• Can run servos up to a maximum load of 100W
• Full color 2.4" TFT RGB 320x240 resolution LCD display
• Supports a wide input voltage of 7~28V
• Updateable firmware via USB

Specs:
Type: ToolkitRC ST8 Advanced Multiple Servo Tester and Data Analyzer
Input Voltage: 7~28V@10A max
Main Output Port: 5~28V@10A max
Signal Port: 5~8.4V@4A max/S1~S4
Output Voltage: 5~8.4V@4A max/S4 Ext
Output Signal: 100us~2900us@33~1000Hz@S1~S4
S5 Input Signal: PWM 500us~2500us@S5/PPM 8ch@S5/SBUS 16ch@S5
P1 Rotation Range: 1000us~2000us@P1
Firmware: Upgradeable via USB type C
LCD Display: Full color 2.4" TFT RGB 320x240 resolution
Dimensions: 99x68x26mm
Weight: 120g