Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Towerpro Brushless Походный 3520-7 600kv / 850W

Towerpro Brushless Походный 3520-7 600kv / 850W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
240 g
Артикул:
TP3520_7
Описание
товара

Модель: Towerpro 3520-7
Размер: 72мм х 45.5diam
Вес: 262g
Напряжение: 10v
Холостой ток: 1.6A
Похожие Батарея Конфигурация: 4-5Lipo
Kv: 600rpm / v
Вал: 5мм
Макс Ядри ток: 45A
Максимальный ток: 56A
Максимальная мощность: 850 Вт
Похожие проп: 13 * 8, 14 * 7 APC-E (тонкий электрический)

Похожие BESC: 60A
Рекомендуемый диапазон батареи: 2200mAh 4S1P ~ 4000 5S1P

Product
Specifications

Дополнительная информация

  • Артикул:
    TP3520_7
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    240.00
  • длина:
    0.00
  • ширина:
    0.00
  • Высота
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Have this motor in my 6 pound 40 size p51 mustang

5 cello 4900 rhino li poly battery ,100amp speed controller



mustang has plenty of power
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I guess I am happy with the motor but it does not perform as per the other reviews. 14*7 APC style, 4 cell 3800 pack (I have tried 2) and it only draws about 19 amps. Motor does not sound as if it is working real hard so I am going to try more prop to make it work harder and draw more current (get more thrust). Looking at the KV of the motor I am not surprised as I have a higher KV motor which is smaller and it spins the same prop at 40 amps (much faster). Lower KV means slower rotation and therefore less power is needed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am building electric conversion of SIG Somethin' Extra and I intend to install this motor to it. I measured 2.7kg static thrust with 14x7E APC propeller (4100mAh Hextronic 4S LiPo). The measured power was about 630W (about 43A). Needless to say that I am happy with the motor. :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just tested this motor on a Super Sportster 40 with a HXT60 BESC (15 timing) and <b>5 LiPo</b> pack (5400mah 30C). With a Graupner 10x7 3-blade prop, current climbs to 55A on the ground(!) this is due to the LiPo's having a very small internal resistance and of course the engine running above its normal rating of 4 LiPo's.

Plane is way overpowered with this setup. However, the engine stays cool which is surprising, even whith the typical 'open cowling' on this glow-powered plane. Had to beef-up the motor mount to avoid vibrations though. Best would be a 'frontside' installation.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A quick note to show you the result of the installation of a TP3520x7 motor with a Polymax 4S 3000mah, HXTBSC60 and a Graupner 3-blade 11x7 prop.



Only 29Amps max current with this setting. (Accurate Motocalc specs for this motor: 650rpm/V 1.2A NoLoad 0.033 Ohm).



At 3kg, the plane has power to spare.

See here

http://www.rcwarbirds.com/laurentpeacemakerpage.htm

http://users.telenet.be/Les_Busards/images/pilatus3.jpg

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice motor. Tooling is as nice as any other brand. Runs smooth and is well balanced. This is a 4-5 cell motor. It's big and strong and likes voltages above 11.7V (3S1P). Get more in soon!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fitted my 1.5 x pushycat this motor is the best I have used so far,it is giving 2.73 kg thrust @ 7400 rpm drawing 43 amps 770 w.with 14x7 prop on polyquest 5s1p 4000mah have not checked speed with radar yet will wait for 31x10 prop to compare Iam impressed ,having tried 5 motors so far

some being a much more expensive and not as powerfull yet running hotter
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Replaced a Four stroke .50 with 3520-7 works perfect in my Black Horse Diablo 3D. More power and more reliable. I use APC 13x8, TURNIGY 60amp Esc and HXT D9 G2 3200mAh 4S 15-25C.

40A, 570W 15 Minutes of flight.

Great!

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Motor. Verwende diesen mit 4S Lipo in einer Fokker DII mit einer 13x6,5 APC-E. Damit sehr gut motorisiert.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I fitted this motor in a 64" span Hyperion Super Chipmunk 70E weighing 2.9Kg. Flying the Chippie for 8 min of sport aerobatics: highest power was 1.067 KW. Maximum current draw was 58A. Average 13.6A. Exceeded 52A draw 18 times. Usual peak current draw is around 40A. After landing, the motor was cool to touch. See my blog here:



http://myhobbycity.com/blog.php?b=22



If you type Tower Pro 3520-07T in to your search engine, you should get a very detailed review of this motor from the Ampeer Newsletter.



verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.