Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA
  • Global

Trackstar 1 / 16th к 1/8-я ЧПУ из алюминиевого сплава колеса баланса Стенд

Trackstar 1 / 16th к 1/8-я ЧПУ из алюминиевого сплава колеса баланса Стенд

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

769,07 руб.
Stock:
Вес:
244 g
Артикул:
9171000215

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Добавьте немного шику в специализированную мастерскую инструментов и приспособлений с Trackstar 1/16 до 1/8-й шкале балансировочный стенд. Стенд CNC, вырезанные из алюминиевого сплава и анодированный красный и серебро, чтобы добавить некоторые серьезные стиль! Стенд легко собрать и идеально подходит для использования в домашних условиях или на трассе.

Многоканальные Переходные кольца позволяют быстро и легко отрегулировать подставку, чтобы удовлетворить колеса как малые, как 1/16 onroad вплоть до 1/8-грузовиков масштаба монстра.

Сбалансированные колеса помогают улучшить производительность, управляемость и износ шин, а также износ подшипников и подвески. Настройтесь, как профи менее чем за половину стоимости конкуренции с Trackstar!

Технические характеристики:
Материал: алюминиевый сплав
Цвет: красный / серебристый
Длина: 106mm
Ширина: 62мм
Высота: 100мм
Вес: 195g

Костюмы:
1/16 onroad и внедорожные колеса
1/10-onroad кузовном колеса
1/10-внедорожные багги колеса (4WD и 2WD)
1/10-е колеса грузовика монстра
1/8-onroad колеса автомобиля
1/8-внедорожные багги, Truggy и монстр колеса грузовика

Product
Specifications

Дополнительная информация

  • Артикул:
    9171000215
  • Brand:
    TrackStar
  • Вес ( г )
    244.00
  • длина
    100.00
  • ширина:
    25.00
  • Высота:
    70.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Another great product from the Trackstar Team. Even without instructions its very easy to assemble and use. Highly recommended for onroad and off road wheel balancing. For this price every driver should should have one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This balancer is well constructed and nicely designed. I am trying to balance 1/10 scale off-road buggy wheel and have quickly discovered I will have to find some sort of bushing to slide over the balancer shaft to perfectly center the wheel on the balancer.
I wish they had included something to center the wheels on the shaft! Two little cones or a bushing would be good. Overall a nice product- just not finished.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well designed and excellent quality fabrication. Very easy to assemble, only took 5 minutes. Successfully balanced wheels for a 1/10 scale buggy which has both 10 mm and 12 mm hexes. Recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Quite impressed with this sturdy design, lack of packaging was slightly disappointing and no instructions manual but was easy enough to assemble and is quite a rigid balancer unlike the cheaper options available
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This TrackStar CNC Aluminum Alloy Wheel Balance Stand is good way to balance your tires up to 1/8 buggy tires.

Quality seems fine for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The product does what it's supposed to do.
A calibration mark/gauge however would have been nice since now you need a triangle ruler or similar tools to make a decent mark with a sharpie.
The bearings run pretty smooth and the axle seems balanced well enough.
Conic washers that are a bit wider than the hex hub groove of the wheel would have been nice as it would help centering wheel and compensate for manufacturing tolerances of the wheels.
All in all this is a must buy for any RC car enthusiast!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It works, but for precision product it is not acceptable, the treat and end nut are not good, the end nut treat is off center. bearings are not tight fitted so they come faling out when axes is removed from the body.
Don't waste money on this unless you have other planes for this item.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have mixed feelings for this item. Quality of parts is great (full aluminium) but out of box experience is terrible. After you grind few peaces for better clearance, oil the bearings and learn that you have to tighten the screw really tight it works as expected.
Only real problem that can't be fixed easy is the fact the the tread on the main shaft that holds the main screw for fixing the wheel is too rough so if you don't fasten it really tight the wheel will wobble.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Assembly is easy if you look at the pictures. The machining is ok, a little rough. But not bad. I oiled my bearings before I put it together and everything spins freely. The shaft is not bent, but the nut that holds the tire on is drilled slightly off center giving it the illusion of being bent. But everything works great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It works and you can balance up to 1:8 monster truck wheels (up to 17mm hex adapter size). You can balance even 1:5 scale tires but you have to add addition stand and make a larger wheel adapter. Material quality is OK (stable & strong) but finishing leaves a lot to be desired. I had to grind some part to get resistance free movement, oil the bearings and 17mm adapter screw is not perfectly straight so if you don't tighten it enough the wheel will wobble. Conclusion: it works, is cheap, but finishing quality is mediocre.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.