New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy 1220 Мини-система коробки передач 10300kv

Turnigy 1220 Мини-система коробки передач 10300kv

Discontinued Product

Please continue searching for a similar product.
Вес:
55 g
SKU:
GB1220-10300
WANT FREE SHIPPING? Click here to find out more!
Размер: 22мм х 12 мм, 30 мм (с валом)
Вес: 8,4 г (kv10300) (не включая разъемы)
Диаметр вала: 1.48mm
Длина переднего вала: 7 мм
Толщина Ламинирование:. 2 мм

Спекуляция
Батарея: 1 Ячейка 1S / 3.7V
RPM: 10300kv
Максимальный ток: 6A
Нет ток нагрузки: 3.7V / 0.4A
Текущая мощность: 7А / 15сек
Внутреннее сопротивление: 0.342ohm
Размеры: 12x22mm
  • Артикул GB1220-10300
  • Brand -
  • Вес ( г ) 55.00
  • длина 90.00
  • Width 48.00
  • Высота 52.00
  • Kv ( об / об) 10300.00
  • Unit Weight (g) 8.4
  • Max Токи (A) 7.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 4.00
  • Мощность (Вт ) 0.00
  • Вал А ( мм) 3.00
  • Длина В ( мм ) 31.00
  • Диаметр С ( мм ) 35.00
  • Может Длина D (мм ) 21.00
  • Общая длина E (мм ) 63.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Overall good motor/gearbox pair. Motor shaft is 1.48mm (1.5) and gearbox shaft is 3mm (threaded). Ran with 5x5 and 6x4 prop, 2S 500Mah LiPo on a small (26"/66mm) scratch balsa Cessna O-1E Bird Dog - free plan from Outerzone UK. Very powerful for the plane.
Gearbox is aluminum with ball bearing "bushings". Mounting the box took some creativity as it has no mounting holes. It does have a oval slot (approx. 8mmx4mm) for a mounting pole.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall good motor/gearbox pair. Motor shaft is 1.48mm (1.5) and gearbox shaft is 3mm (threaded). Ran with 5x5 and 6x4 prop, 2S 500Mah LiPo on a small (26"/66mm) scratch balsa Cessna O-1E Bird Dog - free plan from Outerzone UK. Very powerful for the plane.
Gearbox is aluminum with ball bearing "bushings". Mounting the box took some creativity as it has no mounting holes. It does have a oval slot (approx. 8mmx4mm) for a mounting pole.

I wanted the Turnigy 1220 motor - out of stock. So I bought this system, pinion very hard to remove - anyway good motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wanted the Turnigy 1220 motor - out of stock. So I bought this system, pinion very hard to remove - anyway good motor.

The one I got was binding up.Upon closer inspection I found the inner rotating portion of the motor wobbling and making contact with the outer windings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The one I got was binding up.Upon closer inspection I found the inner rotating portion of the motor wobbling and making contact with the outer windings.

The dirt first:

Weight: 17.9g

Ratio: 7.1:1

Motor KV: 11350

Motor Interal Resistance: 0.21ohm

Max amps: 7a

No load current: 0.8a

Max volts: 7.4v





These are specs as tested, also came with a tag from factory testing, stated 7.4v no load test, 11830kv on prop shaft, 0.8a current.



From testing and Ecalc I have determined it to have 0.18ohm internal resistance.

Ideal props: 8X4 8X5 9x4 9X5 on 1s

Ideal props: 5X5 5x6 6x5 6x6 on 2s

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The dirt first:

Weight: 17.9g

Ratio: 7.1:1

Motor KV: 11350

Motor Interal Resistance: 0.21ohm

Max amps: 7a

No load current: 0.8a

Max volts: 7.4v





These are specs as tested, also came with a tag from factory testing, stated 7.4v no load test, 11830kv on prop shaft, 0.8a current.



From testing and Ecalc I have determined it to have 0.18ohm internal resistance.

Ideal props: 8X4 8X5 9x4 9X5 on 1s

Ideal props: 5X5 5x6 6x5 6x6 on 2s

HInt,

Remove the shaft and loctite the spline. The large cog is not locked well enough on the spline and will come adrift without too serious a consequences, but renders gearbox inoperable until fixed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HInt,

Remove the shaft and loctite the spline. The large cog is not locked well enough on the spline and will come adrift without too serious a consequences, but renders gearbox inoperable until fixed.

recommended for small park or indoor flyer

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

recommended for small park or indoor flyer

Put it in a small SU27. 50cm wings. I can do 3D. Use 1s 1,3mah. Wants more?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put it in a small SU27. 50cm wings. I can do 3D. Use 1s 1,3mah. Wants more?

Has any one figured out the gear ratio? Has any one Tryed two cell operation?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Has any one figured out the gear ratio? Has any one Tryed two cell operation?

The best motor for mini models... it true

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The best motor for mini models... it true

Smooth operation on bench test. prop shaft seems large for motor size, could save some weight with smaller gear and shaft combo. Great deal nonetheless.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth operation on bench test. prop shaft seems large for motor size, could save some weight with smaller gear and shaft combo. Great deal nonetheless.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!