Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • USA

Turnigy 2610 EDF Outrunner 4000kv 55 / 64мм

Turnigy 2610 EDF Outrunner 4000kv 55 / 64мм

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
88 g
Артикул:
T26101C4000
Описание
товара
Turnigy 2610 EDF Outrunner 4000kv 55 / 64мм
Технические характеристики:
KV- 4000
Размеры: 47 х 26мм
Вал: 2.3 / 3.0mm
Напряжение: 11.1V
Вес: 54g
Без нагрузки ток: 1.4A
Нет нагрузки RPM: 44440
Ток нагрузки: 22.7A
Нагрузка RPM: 34480
Упорный: 560g
Монтажное отверстие круг болта: 18мм
Mtg. Отверстие Число & Размер: 4 х M2.5
 
Включает 2 валы, 2,3 мм и 3,0 мм
Product
Specifications

Дополнительная информация

  • Артикул:
    T26101C4000
  • Brand:
    Не применимо
  • Вес ( г )
    88.00
  • длина
    91.00
  • ширина:
    48.00
  • Высота:
    53.00
  • Kv ( об / об)
    4000.00
  • Max Токи (A)
    22.70
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    47.00
  • Может Длина D (мм )
    13.00
  • Максимальное напряжение (В )
    11.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    54
  • Диаметр С ( мм )
    26.00
  • Общая длина E (мм )
    60.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I used it with teh EDF 7 Blade 51 mm. The EDF needs some adjusments. The combo itself is "roaring".
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nicely finished and leightweight motor - kv is accurate and motor is very light but powerful - great for those edf models
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor coupled with the HK 64mm EDF is perfect!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Type your review here.
I use this in a pusher configuration with a 4-3 prop and 3 cell in a VQ Delta Rocket plane. It goes straight up it so must be over 150 watts WOT.

The motor does not get hot. Its is hanging out in the airstream. I used a Rhino 1350 30C. The prop speed is almost 100mph. The plane seems to fly about 80.

This is a pretty powerful motor for its size, and swings the 4-3 with ease on 3 cells.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Don't get caught with the mounting of these units,the one I received has 2.5 mounting holes, very fustrating, This is a size I find hard to get,HK QA is pathetic.!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Combined with blue EDF 64mm sold here gives:



21.5 amps 515g with 2200 3s1p20c battery.



Ran it WOT 30 seconds static on a 22 degree celcius day and it was warm to touch after turning it off for 10 seconds. Not bad at all - also motor weighs 53g and combined with the EDF set is about 77 - 82g depending on your impeller.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor in my boat. Cooling solution is a must. Very good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
light fast and very strong edf works well on 6 and 7 blade
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
windings look nice and tight and have epoxy to keep them in place.will test in fan later
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.