Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Turnigy 2815 EDF Outrunner 4800kv 55 / 64мм

Turnigy 2815 EDF Outrunner 4800kv 55 / 64мм

Now save сэкономь 0,00 руб. 0,00 руб.

744,52 руб.
Нет в наличии!
Stock:
OUT OF STOCK
Вес:
108 g
Артикул:
T28151A4800

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара
Turnigy 2815 EDF Outrunner 4800kv 55 / 64мм
Технические характеристики:
KV- 4800
Размеры: 51 х 28мм
Вал: 2.3 / 3.0mm
Напряжение: 11.1V
Вес: 73g
Без нагрузки ток: 3.2A
Нет нагрузки RPM: 55560
Ток нагрузки: 39.6A
Нагрузка RPM: 42560
Упорный: 750г
Монтажное отверстие круг болта: 18мм
Mtg. Отверстие Число & Размер: 4 х M2.5
 
Включает 2 валы, 2,3 мм и 3,0 мм
Product
Specifications

Дополнительная информация

  • Артикул:
    T28151A4800
  • Brand:
    Нет
  • Вес ( г )
    108.00
  • длина
    93.00
  • ширина:
    45.00
  • Высота:
    53.00
  • Kv ( об / об)
    4800.00
  • Max Токи (A)
    39.60
  • Мощность (Вт ):
    0.00
  • Длина В ( мм ):
    51.00
  • Может Длина D (мм )
    18.00
  • Максимальное напряжение (В )
    11.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    73
  • Диаметр С ( мм )
    28.00
  • Общая длина E (мм )
    65.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very good motor with 5 blade 64edf setup with 60amp ESC and 2200 40c battery. Test result Watt: 480watt @ 42amps. Well balance and good performance with 4 flights.
Quality
Value
Overall
Quality
Value
Overall

reveived with 2 more shafts : a 2.3mm and the stock 3 mm

shaft A (mm) 3mm
outrunner part diameter 32 mm
Length B (mm) 50.5
Diameter C (mm) 28
Can Length D (mm) 18
can diameter next to shaft 20mm
Total Length E (mm) 65

plugs are 3.5mm diameter, wire length is 75 including plugs

No screws given, difficult to find them in my screw box

perfectly suitable and mountable in an HK EDF Ducted Fan Unit 2.5inch 5 Blade product number 11163n and propeller is a replacement part for the JET-TIGER
Quality
Value
Overall
Quality
Value
Overall
I use this motor in the Dr. Mad Thrust 50mm 10 blade EDF. With a half charged 3S 11.1v 30C Rhino pack, this motor pulls 33A, and more on a new pack that is charged. The motor is quite large, runs fairly balanced and as far as I can identify, is the same as ExceedRC's 4800kv motor right from the machined bearing housing to the bell. The magnet bell and shaft can be pulled out to facilitate changing the shafts that are included. The shaft is held in with a set screw and will require a 1.5mm hex wrench. Removing a shaft will take some work, just be careful not to bend the shaft as you remove it. I hold the shaft in a bench vise and grab the magnet bell and twist axially. It will turn free with enough force. I will definitely buy another, it is a nice working motor that I would feel comfortable using in 64mm five & six bladed EDFs.
Quality
Value
Overall
Quality
Value
Overall
motorun 3s oldugu syleniyor 4s le calistiranlar var celiski !!!
Quality
Value
Overall
Quality
Value
Overall
Tres Bon moteur puissant. Mis sur un Phazer HK Il faut juste commander les bis pour la fuxation
Quality
Value
Overall
Quality
Value
Overall
compared this motor to value hobby's edf 4800kv motor. both perform about the same. value hobby edf seems to have a little more punch. this edf is smooth from start to finish. depends on the pilot too. i'm using it with a 64 mm 7 blade fan with a 3s 40c 2250 Rhino battery. not even half throttle needed to send this plane high. i put it on a glider which works great for my needs. it also sounds great with a 7 blade fan.
Quality
Value
Overall
Quality
Value
Overall
great product ..thanks hk
Quality
Value
Overall
Quality
Value
Overall
Ottimo motore. L'ho montato sul mio L39 Electrifly con una ventola da 64mm e sono rimasto molto soddisfatto. Velocissimo e il jet riesce a salire in verticale per molti metri anche se non all'infinito...Con una 64mm consuma circa 49 ampere
Quality
Value
Overall
Quality
Value
Overall
Wow, excellent motor! Got this on the stock 5 blade 64mm EDF with around 750-800 grams of thrust using just a 3S 20C lipo (should be higher, 40C better!!)... Amazing! Good build quality. I will post the Amps and Watts later on, still got to receive the watts meter. Highly recommended for anyone wanting to upgrade their stock EDF without the extra costs of 4S batteries and without cutting away EPO for a bigger fan!
Quality
Value
Overall
Quality
Value
Overall
Very power motor. However, I was running on v. low power and a strange smell appeared. somewhat like an electrical burning smell (but not exact)

3S will be your best, don't go any higher. Also stay below 6 blades
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.