New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy 5A 1S Brushless ESC

Turnigy 5A 1S Brushless ESC

Now save сэкономь 0,00 руб. 0,00 руб.

699,42 руб.
Статус:
Нет в наличии!
SKU:
T5A-1S
WANT FREE SHIPPING? Click here to find out more!
Turnigy 5A-1S ESC очень маленький и легкий бесщеточный регулятор скорости, который поддерживает 1S (3.7-4.2v) Липо ячейку со встроенным 0.5A / 5v выход БЭК. Идеально подходит для микро-Хели и внутренних листовок.
Особенности:
микропроцессорное управление
Крайне низкое сопротивление
3A непрерывный (5A всплеск)
1S липо клеток или 3 клеток NiMH / NiCad
Высокая скорость переключения регулируемая (PWM: 8KHz / 12кГц / 16KHz)
BEC: Макс 0.5A (переключение)
Отсечка Напряжение: 3.0V
Программируемые типы обрезания (мягкий обрезания / жесткий отсечки)
Программируемый тип тормоза (отключить / мягкий тормоз / жесткий тормоз)
Время заранее программируемая (низкий / стандарт / высокий)
Программируемые ограничение тока (очень ensitive / стандарт / нечувствительным / выкл)
Программируемый тип запуска (очень плавный пуск / плавный пуск / быстрый старт)
Тепловая защита (100 по Цельсию)
Применить к большинству Inrunner и Outrunner бесщеточных двигателей.
Безопасная мощность по программе взведения обеспечивает двигатель случайно не включится.
Автоматическое отключение при потере сигнала или радиопомехи становится тяжелой в течение более 3 секунд .После радиосвязь была восстановлена, перемещая ручку газа в крайнее нижнее положение может перезапустить двигатель.
Примечание: Программируемая с Turnigy монстра программирует карты.
Спекуляция
Напряжение питания: 3.0 ~ 4.2V
Прод. Ток: 3A
Выброс ток: 5A
Батарея: 1 Ячейка Липо / 3 клеток Nixx
BEC: 5V / 0.5A
Размер: 25 * 13 * 5 мм
Вес: 2g

Мы предлагаем клиентам не программировать ЭСК с их Tx.
  • Артикул T5A-1S
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 25.0000
  • длина 100.00
  • Packaging Width 6.00
  • Высота 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

Very small and light.easy to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very small and light.easy to use.

regolatore leggerisimo per micro motori,funzionale ed a baso costo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

regolatore leggerisimo per micro motori,funzionale ed a baso costo

Customer files
photo instructions Download [3603]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking