New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy 5A (8-40v) ЦМП для Lipo

Turnigy 5A (8-40v) ЦМП для Lipo

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

475,24 руб.
Статус:
Есть в наличии
SKU:
SBEC-40V
WANT FREE SHIPPING? Click here to find out more!
Turnigy 5A ЦМП является передовым регулятор переключения DC-DC, который будет поставлять постоянный 5А. Он работает с 2 - 10 клеток LiPoly упаковке и поставляет без помех постоянную 5 или 6v к ресиверу.
Технические характеристики:
Тип: Switching
Защита входа: Защита от обратной полярности
Выход (постоянный): 5v / 5A или 6v / 5A
Входное напряжение: 8V-40V (2-10cell липо)
Вес: 21g
Поставляется с подробными инструкциями.
  • Артикул SBEC-40V
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 39.0000
  • длина 130.00
  • Packaging Width 10.00
  • Высота 10.50
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Used this so I can run 2S lipos for the receiver in a nitro Traxxas Revo; flawless.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used this so I can run 2S lipos for the receiver in a nitro Traxxas Revo; flawless.

Works a treat. Pumps out a steady voltage with no interference with my receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works a treat. Pumps out a steady voltage with no interference with my receiver.

Really crap.
I try to use it in a 450er as external BEC.
I measure an curancy of 2,5A peak when i shake the sticks (on ground).
Too much for my ESC. So i built in this 5A in hope too be in specs.

But the result looks bad. same test with this BEC and the receiver reboot.
So the output is under 2A (5V)

Dangerous to flight with this BEC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really crap.
I try to use it in a 450er as external BEC.
I measure an curancy of 2,5A peak when i shake the sticks (on ground).
Too much for my ESC. So i built in this 5A in hope too be in specs.

But the result looks bad. same test with this BEC and the receiver reboot.
So the output is under 2A (5V)

Dangerous to flight with this BEC.

Bench tested @ 5v, 2.5 amp load and caused a thermal shutdown within a few minutes. Removed shrink tube for better ventilation but 5v, 2.5 amp load still causes thermal shutdown. I have 2 units and they both perform the same.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bench tested @ 5v, 2.5 amp load and caused a thermal shutdown within a few minutes. Removed shrink tube for better ventilation but 5v, 2.5 amp load still causes thermal shutdown. I have 2 units and they both perform the same.

What a SBEC,if your running high volts this is a most,i have this installed on my 1/5 Buggy running 8s and it works every time no over heating no shutdowns i love it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a SBEC,if your running high volts this is a most,i have this installed on my 1/5 Buggy running 8s and it works every time no over heating no shutdowns i love it.

this can take high Voltage input, good if you have multiple setup with different operating voltages.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this can take high Voltage input, good if you have multiple setup with different operating voltages.

The best SBEC out there for its price.Cheap But reliable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The best SBEC out there for its price.Cheap But reliable.

I purchased and tested two of these units. They get extremely hot under load so I would advise providing a decent airflow to get any reliability (Heat kills). Treat them as a 3A BEC with 5A surge and you should be good!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased and tested two of these units. They get extremely hot under load so I would advise providing a decent airflow to get any reliability (Heat kills). Treat them as a 3A BEC with 5A surge and you should be good!!

Good BEC. I noticed a stability increase in my quad since installing this BEC over the ESC complementary BEC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good BEC. I noticed a stability increase in my quad since installing this BEC over the ESC complementary BEC.

Big and strong. solid

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Big and strong. solid

Customer files
Turnigy 5A (8-40v) SBEC for Lipo Download [633]
SBEC Manual Download [948]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!