New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy SK3 Aerodrive - 2122-1800kv Brushless Походный Мотор

Turnigy SK3 Aerodrive - 2122-1800kv Brushless Походный Мотор

Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2122-1800
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors являются следующим шагом вперед в качестве двигателя и дизайна. Мы поручили инженерам источник лучшего качества магниты, подшипники и материалы, доступные для них и разработать двигатель, который бы не только соперника, но превосходят качество многих ведущих двигателя производит на рынке сегодня.

Результатом является эффективным, высокого калибра двигателя с использованием качественных двойным экранированием подшипников, спеченных неодимовыми магнитами и струнный намотана статора, обеспечивая точную и последовательную обмотки каждый раз.

Двигатели Turnigy SK3 подходят для моделистов, которые ищут качество бесщеточный двигатель без компромиссов.

Спекуляции.
Включает: 7T
Напряжение: 2 ~ 3S LiPoly
RPM / V: 1800kv
Внутреннее сопротивление: 0,16 Ом
Максимальная загрузка: 7A
Максимальная потребляемая мощность: 55W
Вал Dia: 2.0mm
Вес: 23г
Штекер двигателя: 2 мм разъем Пуля



  • Артикул SK3-2122-1800
  • Brand SK3
  • вес 85.0000
  • длина 113.00
  • Width 46.00
  • Высота 82.00
  • Kv ( об / об) 1800.00
  • Max Токи (A) 7.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 11.00
  • Мощность (Вт ) 55.00
  • Вал А ( мм) 2.00
  • Длина В ( мм ) 22.00
  • Диаметр С ( мм ) 21.00
  • Может Длина D (мм ) 9.00
  • Общая длина E (мм ) 28.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Dvouplopnk z EPP rozpt 500mm, vha 195g uveze pohodln s 2S LiPo a vrtul 8x4E.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dvouplopnk z EPP rozpt 500mm, vha 195g uveze pohodln s 2S LiPo a vrtul 8x4E.

Very small in size, includes 3 motor mounts & pre-soldered connectors .
Prop has to be connected with included prop saver. There is no other way to mount props as shafts do not extend past motor, so keep that in mind.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very small in size, includes 3 motor mounts & pre-soldered connectors .
Prop has to be connected with included prop saver. There is no other way to mount props as shafts do not extend past motor, so keep that in mind.

I just finished a rough static test on my bench here of my friend's SK3-2122-1800kv.

Overall, the motor is small, but packs a pretty big punch. Good solid feeling magnets. The only odd thing is the back of the motor has a screw and self-locking nut (the kind with nylon built into them to keep it from coming off). I'm not sure what that's all about, but the built in prop saver works fine. I didn't have to unscrew the set screws to get the o-ring on, but did have to stretch the o-ring to slip it under the screws. No biggie there.

As noted in the Discussion section, the best prop for 2S operation does appear to be an 8x4 which in my tests gave 230 grams of thrust @ 6.7 V, approx. 46 Watts input power, and approx. 7A input current.

I also tested using a 3S setup and for thrust, the best (of the props I had) was a 5.7x3 which yielded 157 g of thrust @ 4A, 50W, 12.3V.

Here's my numbers:
V : prop : Watts : Amps : Thrust
6.7 : 8x4 : 46 : 7 : 230 g
6.x : 7x6 : 54 : 7 : 215 g
6.0 : 6x5 : 41 : 6 : 153 g
12.25 : 5x5 : 70 : 5.6 : 75 g
12.3 : 5.7x3 : 50 : 4 : 157 g

**NOTE** the above numbers are _rough_ and not meant to be scientifically accurate! They are static and eyballed. Just to give you an idea of what one hobbiest has seen with this motor.

I hope someone finds these number useful. I like the motor. Would be good on a 100 - 150g plane I'd say... doing 3D. Or for sport

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just finished a rough static test on my bench here of my friend's SK3-2122-1800kv.

Overall, the motor is small, but packs a pretty big punch. Good solid feeling magnets. The only odd thing is the back of the motor has a screw and self-locking nut (the kind with nylon built into them to keep it from coming off). I'm not sure what that's all about, but the built in prop saver works fine. I didn't have to unscrew the set screws to get the o-ring on, but did have to stretch the o-ring to slip it under the screws. No biggie there.

As noted in the Discussion section, the best prop for 2S operation does appear to be an 8x4 which in my tests gave 230 grams of thrust @ 6.7 V, approx. 46 Watts input power, and approx. 7A input current.

I also tested using a 3S setup and for thrust, the best (of the props I had) was a 5.7x3 which yielded 157 g of thrust @ 4A, 50W, 12.3V.

Here's my numbers:
V : prop : Watts : Amps : Thrust
6.7 : 8x4 : 46 : 7 : 230 g
6.x : 7x6 : 54 : 7 : 215 g
6.0 : 6x5 : 41 : 6 : 153 g
12.25 : 5x5 : 70 : 5.6 : 75 g
12.3 : 5.7x3 : 50 : 4 : 157 g

**NOTE** the above numbers are _rough_ and not meant to be scientifically accurate! They are static and eyballed. Just to give you an idea of what one hobbiest has seen with this motor.

I hope someone finds these number useful. I like the motor. Would be good on a 100 - 150g plane I'd say... doing 3D. Or for sport

this motor has extreme vertical climb power !!!!! i run on it 2s 20c 610mah rhino pack and it give me around 9 minutes of hard 3 d flying and i use 8x4 gws prop it has more power then original hacker but it drain the battery more then hacker motor but power is awsome!!!!!!! recommendo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor has extreme vertical climb power !!!!! i run on it 2s 20c 610mah rhino pack and it give me around 9 minutes of hard 3 d flying and i use 8x4 gws prop it has more power then original hacker but it drain the battery more then hacker motor but power is awsome!!!!!!! recommendo

Customer files
Prop mount done with 3D printer Download [24]
Drawing letter format 1:1 Download [24]
Drawing Download [58]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save