Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Turnigy SK3 Aerodrive - 2822-1090kv Brushless Походный Мотор

Turnigy SK3 Aerodrive - 2822-1090kv Brushless Походный Мотор

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 006,70 руб.
Stock:
Вес:
98 g
Артикул:
SK3-2822-1090

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Turnigy SK3 Motors являются следующим шагом вперед в качестве двигателя и дизайна. Мы поручили инженерам источник лучшего качества магниты, подшипники и материалы, доступные для них и разработать двигатель, который бы не только соперника, но превосходят качество многих ведущих двигателя производит на рынке сегодня.

Результатом является эффективным, высокого калибра двигателя с использованием качественных двойным экранированием подшипников, спеченных неодимовыми магнитами и струнный намотана статора, обеспечивая точную и последовательную обмотки каждый раз.

Двигатели Turnigy SK3 подходят для моделистов , которые ищут качество бесщеточный двигатель без компромиссов.

Спекуляции.
Включает: 50T
Напряжение: 2 ~ 3S LiPoly
RPM / V: 1090 киловольт
Внутреннее сопротивление: 0,235 Ом
Максимальная загрузка: 7A
Максимальная потребляемая мощность: 80W
Вал Dia: 3.0mm
Отверстия под болты: 16мм и 19мм
Болт резьба: M3
Вес: 31g
Мотор Штекер: 3,5 мм разъем Пуля

Product
Specifications

Дополнительная информация

  • Артикул:
    SK3-2822-1090
  • Brand:
    Нет
  • Вес ( г )
    98.00
  • длина
    105.00
  • ширина:
    45.00
  • Высота:
    80.00
  • Kv ( об / об)
    1090.00
  • Max Токи (A)
    7.00
  • Мощность (Вт ):
    80.00
  • Длина В ( мм ):
    21.00
  • Может Длина D (мм )
    8.00
  • Максимальное напряжение (В )
    11.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    31
  • Диаметр С ( мм )
    28.00
  • Общая длина E (мм )
    33.00
  • Сопротивление ( тк ):
    235.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very smooth turning. And very light weight.
Quality
Value
Overall
Quality
Value
Overall
I love these little beasts, strong enough for a FW330, these make my 260 zoom using a 3S 2200 mAh battery. Fancy packaging, and extra mounting bits too.
Quality
Value
Overall
Quality
Value
Overall
Motor macht auf dem Prfstand einen guten Eindruck. Meine Messergebnisse mit Turnigy Lipo 3/1200 und Hobbyking 12 A Regler sowie APC Style Propeller 8x4 von Hobbyking:
6,5 A, 8800 U/min, Schub: 320 g.
Quality
Value
Overall
Quality
Value
Overall
These motors where what I used for a quadcopter build a year ago and lets say they are a great choice. Flight time wise, I'm flying around 10 mins with a 0845 prop, 3s 2200 mah lipo, and 10amp escs. These motors are great for the price, they do get a little bit warm but not close to hot.
As for build quality, there is nothing to complain about except that one of the motors did get bent from a 25ft fall, as the bottom plate (the plate from where the shaft protrudes) seems to be the weakest part of the motor but then again it was 25 feet.
These motors are
Over all, I will buy these motors again as they are cheap, preform well, and look good on my quad.

Note-If you are going to get this motor, get some higher rated esc's because my 10 amp escs do get fairly hot, even at winter time.
Quality
Value
Overall
Quality
Value
Overall
Tested at 12 volts with a 8x4.5" propeller: static thrust = 369 grams, current = 6.82 A, that are good values. But the ball bearings are of a very low quality.

Quality
Value
Overall
Quality
Value
Overall
Good motor for small planes, It runs on 2 or 3 cell lipo and 8x4.5 prop with a 12 amp esc on my Magnum Reloaded.
Quality
Value
Overall
Quality
Value
Overall
These are very good motors, especially for a medium-sized quadcopter (I use the SK450 frame with these). not too expensive, yet good quality. Lots of bang for your buck.
Quality
Value
Overall
Quality
Value
Overall
Bought 2 pcs, but only bench tested them so far: 7.4Amps at 10.4Volt (semi charged 3S LiPo) with 8x4.5" prop. Quality seems fine.
Quality
Value
Overall
Quality
Value
Overall
vraiment tip top ses moteurs,

un ptit bemol, les 3 phases ne sortent pas toujours du mme ct par rapport au fixation du moteur. Ou ptte la faute pas d'chance
Quality
Value
Overall
Quality
Value
Overall
Very nice little motor.
It is a comparable motor to the KDA 20-50S.

33g with 2mm gold connectors and the prop holder (fixed with 3 screws).
The 3 screws are not the best quality, so don't screw them too strong, or the winding will break.

I have measured this motor (and the KDA 20-50S) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration.
(Turnigy SK3 2822-1090 - timing high)

perfect motor for small quadcopters:
measured for example following combination:
Turnigy Plush 10A
Maxx Pro. EPP0845 Prop.
Voltage: 11,15V
Current: 8,30A
RPM: 7132
thrust: around 425g

Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Drawing download now [86.05Kb]

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.