New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy SK3 Aerodrive - 2830-1020kv Brushless Походный Мотор

Turnigy SK3 Aerodrive - 2830-1020kv Brushless Походный Мотор

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 395,23 руб.
Статус:
Есть в наличии
SKU:
SK3-2830-1020
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors являются следующим шагом вперед в качестве двигателя и дизайна. Мы поручили инженерам источник лучшего качества магниты, подшипники и материалы, доступные для них и разработать двигатель, который бы не только соперника, но превосходят качество многих ведущих двигателя производит на рынке сегодня.

Результатом является эффективным, высокого калибра двигателя с использованием качественных двойным экранированием подшипников, спеченных неодимовыми магнитами и струнный намотана статора, обеспечивая точную и последовательную обмотки каждый раз.

Двигатели Turnigy SK3 подходят для моделистов , которые ищут качество бесщеточный двигатель без компромиссов.

Спекуляции.
Включает: 20T
Напряжение: 2 ~ 3S LiPoly
RPM / V: 1020 кВ
Внутреннее сопротивление: 0,11 Ом
Максимальная загрузка: 18A
Максимальная потребляемая мощность: 168W
Вал Dia: 3.0mm
Отверстия под болты: 16мм и 19мм
Болт резьба: M3
Вес: 58g
Мотор Штекер: 3,5 мм разъем Пуля

  • Артикул SK3-2830-1020
  • Brand SK3
  • вес 129.0000
  • длина 110.00
  • Packaging Width 45.00
  • Высота 80.00
  • Kv ( об / об) 1020.00
  • Max Токи (A) 18.00
  • Сопротивление ( тк ) 110.00
  • Максимальное напряжение (В ) 11.00
  • Мощность (Вт ) 168.00
  • Вал А ( мм) 3.00
  • Длина В ( мм ) 32.00
  • Диаметр С ( мм ) 28.00
  • Может Длина D (мм ) 16.00
  • Общая длина E (мм ) 44.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Winding insulation, very bad. I use 40Amp ESC , and after two crashes, I lost two motors, because of blocking propelers. Smell bad !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Winding insulation, very bad. I use 40Amp ESC , and after two crashes, I lost two motors, because of blocking propelers. Smell bad !

These are an excellent smooth motor. I am using them on my quad in combination with simonk flashed Blueseries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are an excellent smooth motor. I am using them on my quad in combination with simonk flashed Blueseries.

rn gzel bir ambalajla aksesuarlar ile beraber geliyor. Multicopter iin almtm ve eer sk450 quadcopter frame alacaksanz, frame'i modifiye etmeniz gerekiyor. Aksi halde motor mili montaja izin vermiyor. Ben beenerek kullandm. Bir krmdan sonra motor millerinde hafif bir yamulma olduunu hissettim ve o haliyle ok ucuza sattm. Tabi satarken krmdan bahsettim.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

rn gzel bir ambalajla aksesuarlar ile beraber geliyor. Multicopter iin almtm ve eer sk450 quadcopter frame alacaksanz, frame'i modifiye etmeniz gerekiyor. Aksi halde motor mili montaja izin vermiyor. Ben beenerek kullandm. Bir krmdan sonra motor millerinde hafif bir yamulma olduunu hissettim ve o haliyle ok ucuza sattm. Tabi satarken krmdan bahsettim.

Ordered one for an electrifly nieuport 11, very satisfied by the engine. well engineered, complete accessories, and a nice packing (i know we don't fly the box, but that's a pleasure to open it). Connected to a plush 20 , a 1650 3s , and 10x5 APC style
Regarding my appliance, a bipe weighting about 700 g, the engine is overpowering, i take off half throttle, fly on a third or a fourth.
I see this motor really matching the specs, no doubt i will buy another one for my next dare sopwith tripe. Shall i say i recommend it ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered one for an electrifly nieuport 11, very satisfied by the engine. well engineered, complete accessories, and a nice packing (i know we don't fly the box, but that's a pleasure to open it). Connected to a plush 20 , a 1650 3s , and 10x5 APC style
Regarding my appliance, a bipe weighting about 700 g, the engine is overpowering, i take off half throttle, fly on a third or a fourth.
I see this motor really matching the specs, no doubt i will buy another one for my next dare sopwith tripe. Shall i say i recommend it ?

I place that motor in my Pitts and now flyies very fast with prop 10x5. Very strong motor for the size

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I place that motor in my Pitts and now flyies very fast with prop 10x5. Very strong motor for the size

seems like a good motor, just dont expect to use the bottom housing mounts, the screws are so thin a baby would strip them. also the wires come out of the housing in different holes in relation to the mounting plate between motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

seems like a good motor, just dont expect to use the bottom housing mounts, the screws are so thin a baby would strip them. also the wires come out of the housing in different holes in relation to the mounting plate between motors.

I buy it to replace the extra 260 motor. amazing quality for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I buy it to replace the extra 260 motor. amazing quality for the price.

I always re-wind Turnigy motors when I buy them, but I cannot figure out how to disassemble this one. I removed the circlip on the back, but the shaft remains firmly within the bearing tube. Is there a hidden circlip, or is the shaft glued to the bearings?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I always re-wind Turnigy motors when I buy them, but I cannot figure out how to disassemble this one. I removed the circlip on the back, but the shaft remains firmly within the bearing tube. Is there a hidden circlip, or is the shaft glued to the bearings?

Very nice motor. It is a comparable motor to the Turnigy 2213/20. 61g with 3,5mm gold connectors and the prop holder (fixed with 3 screws). The 3 screws are not the best quality, so don't screw them too strong, or the winding will break. I have measured this motor (and the Turnigy 2213/20) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration. (Turnigy SK3 2830-1020 - timing med) perfect motor for quadcopters: measured for example following combination: Turnigy Platinum 40A ESC;
APC SF 10x3,8 Prop.; Voltage: 11,24V; Current: 18,76A; RPM: 7912; thrust: around 1100g

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice motor. It is a comparable motor to the Turnigy 2213/20. 61g with 3,5mm gold connectors and the prop holder (fixed with 3 screws). The 3 screws are not the best quality, so don't screw them too strong, or the winding will break. I have measured this motor (and the Turnigy 2213/20) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration. (Turnigy SK3 2830-1020 - timing med) perfect motor for quadcopters: measured for example following combination: Turnigy Platinum 40A ESC;
APC SF 10x3,8 Prop.; Voltage: 11,24V; Current: 18,76A; RPM: 7912; thrust: around 1100g

Overall nice little motors, let down by poor quality control... I bought 6 for my Y6 multicopter, but 2 have very rough bearings and one of those two had poorly tapped holes on the top of the bell for mounting the alternative prop adaptor - I had to use sleeve lock and some epoxy on the adaptor to hold it firmly in place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall nice little motors, let down by poor quality control... I bought 6 for my Y6 multicopter, but 2 have very rough bearings and one of those two had poorly tapped holes on the top of the bell for mounting the alternative prop adaptor - I had to use sleeve lock and some epoxy on the adaptor to hold it firmly in place.

  1. 1
  2. 2
Customer files
Drawing Download [88]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save