Turnigy SK3 Aerodrive - 5045-500kv Brushless Походный Мотор

This motor is runing so smooth with awsomne power. Tried it on a HK Piper ( the big white one ) and with 6S and a 14x8 prop it went unlimited vertical. Very nice made and reliable.

In one word Awesome. Excellent value/quality. I run this on the little apple with 14x7 prop and 6S 4000 zippy compact. 980 watts 48A and endless vertical power. Flying weight of the little Apple is 2900 grams. Shame Little Apple is not selling anymore its a very nice plane for training and aerobatics, i highly recommend this too.

A very good motor at a good price. Fitted to a scale Art Jesters Jeep which weighs over 6Lb and flies it around quite fast with good vertical performance. Test data on a 14 x 7 APC prop,
Turnigy 3000mah 6S 20C battery, 80 amp esc. Amps 40, Watts 880 Thrust 8 Lbs. I fly for about 4.5 mins and have nearly 50pcnt battery left with the motor cool even though it is in an enclosed cowl. Fitting a bigger prop will give more power but for this plane and battery it is perfect.

I use them on my 60" Extreme flight planes with a 17X6 E prop from Hk. Over 1500watts on 6s. I like it.

I haven't flew this motor yet. It looks good but I ran into a problem right away. The prop adapter shaft was so soft that merely tightening the prop was enough to mess up the threads. Due to a poor reputation for warrenty service I just ordered a new one which seems to be okay. I did run the motor on the bench.

Nutze den Motor in einer GW Slick 61" an 6S300 mit 15X8. Der Motor läuft angenhem leise und hat Kraft ohne Ende. Leider kommt der Rotostar Regler damit nicht sonderlich gut zurecht. Ab und zu quitscht es bei schnellen Gasstößen. Der Motor selbst ist aber Top

Awesome motor- Ive installed this on my Nemesis. 15x12 prop on 6 Cell gives me 1100 watts at 56 amps and 3.6 Kg static thrust. Im at very high altitude but these figures prove how good this motor is.

used a 6 s 4000 25-50c nano tec lipo. 16x10 prop =900w 50amps draw. I have not tried 7s but I think 1350 would be very optimistic. but runs cool at 50 amps. flown once on a seagull flybaby a 10minute flight. loads of power.

Tested with 5000mAh 6S 25C, 75A C.C. ESC, 13X8 MAS 3 Blade. Max (925W) 42A @8600RPM. Ran super smooth, only warm to the touch after 7min run.

have run this motor in an extreme flight 64" MXS for a couple of years now. No issues whatsoever. Runs cool and plenty powerful on 6s, unlimited vert and easy pullout from falling maneuvers. have not had any hardware issues. Use locktite and do not over tighten bolts, it not a gasser. I use sk3 motors in all of my electrics and see no reason whatsoever to buy another brand for 2-4 times the price.