New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy SK3 Aerodrive - 6354-260kv Brushless Походный Мотор

Turnigy SK3 Aerodrive - 6354-260kv Brushless Походный Мотор

Shipped From:
  • USA
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

4 322,68 руб.
Статус:
Есть в наличии
SKU:
SK3-6354-260
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors являются следующим шагом вперед в качестве двигателя и дизайна. Мы поручили инженерам источник лучшего качества магниты, подшипники и материалы, доступные для них и разработать двигатель, который бы не только соперника, но превосходят качество многих ведущих двигателя производит на рынке сегодня.

Результатом является эффективным, высокого калибра двигателя с использованием качественных двойным экранированием подшипников, спеченных неодимовыми магнитами и струнный намотана статора, обеспечивая точную и последовательную обмотки каждый раз.

Двигатели Turnigy SK3 подходят для моделистов, которые ищут качество бесщеточный двигатель без компромиссов.

Спекуляции.
Включает: 18т
Напряжение: 8 ~ 10S LiPoly
RPM / V: 260kv
Внутреннее сопротивление: 0,023 Ом
Максимальная загрузка: 70A
Максимальная потребляемая мощность: 2360W
Вал Dia: 8.0mm
Отверстия под болты: 32mm
Болт резьба: M4
Вес: 489g
Штекер двигателя: 4 мм пуля разъем



  • Артикул SK3-6354-260
  • Brand SK3
  • вес 790.0000
  • длина 180.00
  • Width 71.00
  • Высота 132.00
  • Kv ( об / об) 260.00
  • Max Токи (A) 70.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 37.00
  • Мощность (Вт ) 2360.00
  • Вал А ( мм) 8.00
  • Длина В ( мм ) 54.00
  • Диаметр С ( мм ) 59.00
  • Может Длина D (мм ) 28.00
  • Общая длина E (мм ) 83.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Geht Tadellos in Schnellen Motormodellen an 12s 5.0Ah und eine APC 11X14 und für mehr Dampf 12X14 Latte ! Strom 43 Amp, Schub 4,7 Kg. Zieht wie ein Tier, und Regler YEP 120 HV an 18° Timing . M.f.g Piet v. D. :-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Geht Tadellos in Schnellen Motormodellen an 12s 5.0Ah und eine APC 11X14 und für mehr Dampf 12X14 Latte ! Strom 43 Amp, Schub 4,7 Kg. Zieht wie ein Tier, und Regler YEP 120 HV an 18° Timing . M.f.g Piet v. D. :-)

Verry Stron Motor with High Torque. Nice for Elektrik Longboard. Baldy mine was broken... Hope it will be Replaced!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Verry Stron Motor with High Torque. Nice for Elektrik Longboard. Baldy mine was broken... Hope it will be Replaced!

I have been flying this motor on a Monolog 110 pattern plane for 2 years now. Running 8 cells through an 80 amp ESC. All up weight with batteries she runs in at 9 lbs. 3/4 throttle would and does pull this plane much to fast. PLENTY OF POWER!!! APC 16 x 12 prop works perfectly for this set up. Now if I could inject some form of talent serum.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been flying this motor on a Monolog 110 pattern plane for 2 years now. Running 8 cells through an 80 amp ESC. All up weight with batteries she runs in at 9 lbs. 3/4 throttle would and does pull this plane much to fast. PLENTY OF POWER!!! APC 16 x 12 prop works perfectly for this set up. Now if I could inject some form of talent serum.....

Balance: good but not perfect. Bearings: good but can be smoother Durability: not good al all I do not trust this motor any more, it started making strange metal noises 2 flights ago. Puled it apart but could not find anything out of the ordinary. Ordered a good quality Hacker for my big planes. Smaller planes will remain on Turingy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Balance: good but not perfect. Bearings: good but can be smoother Durability: not good al all I do not trust this motor any more, it started making strange metal noises 2 flights ago. Puled it apart but could not find anything out of the ordinary. Ordered a good quality Hacker for my big planes. Smaller planes will remain on Turingy.

Tengo varios SK3 pequeos con buenos resultados.
Pero este modelo es un desastre, en el primes vuelo salio disparada la campana del motor y salve el avin de milagro,. una vez puesta una arandela cerclip decente, y probar de nuevo, el motor empieza a realizar ruidos extraos,se sueltan los imanes y no hay forma de pegarlos ya, cada vez que se gira a altas revoluciones la fuerza centrifuga los desplaza.
He comprado un Axi, y este para a la basura

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tengo varios SK3 pequeos con buenos resultados.
Pero este modelo es un desastre, en el primes vuelo salio disparada la campana del motor y salve el avin de milagro,. una vez puesta una arandela cerclip decente, y probar de nuevo, el motor empieza a realizar ruidos extraos,se sueltan los imanes y no hay forma de pegarlos ya, cada vez que se gira a altas revoluciones la fuerza centrifuga los desplaza.
He comprado un Axi, y este para a la basura

OK
So finally I've thrown this motor away.
The reason it's cheap is because frankly it's
rubbish, badly made, poor materials and
will give you nothing but grief.
I spent another 40 bucks on new bearings
when they failed after 5 flights. The magnets
then detached themselves from the can.
Finally the can started to split.
AVOID
Sorry Hobby King I love your gear but this is
shockingly bad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK
So finally I've thrown this motor away.
The reason it's cheap is because frankly it's
rubbish, badly made, poor materials and
will give you nothing but grief.
I spent another 40 bucks on new bearings
when they failed after 5 flights. The magnets
then detached themselves from the can.
Finally the can started to split.
AVOID
Sorry Hobby King I love your gear but this is
shockingly bad.

Update
Oh dear 5 flights then the bearings collapse.
At least it landed OK.
So I ordered some decent SKF bearings and have installed them. Stay tuned for a further report.
P.S.
The three bearings cost 63pcnt of the complete motor cost, perhaps that
should be taken into consideration when buying one of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Update
Oh dear 5 flights then the bearings collapse.
At least it landed OK.
So I ordered some decent SKF bearings and have installed them. Stay tuned for a further report.
P.S.
The three bearings cost 63pcnt of the complete motor cost, perhaps that
should be taken into consideration when buying one of these.

Ok so here's the story so far.
Although I'm a committed I.C. nut and have several small 30 sized and
3d foamy type lekky's, this is my first foray into larger stuff.
I intend this to go in my 69in QuiQue Yak 54 which at this present moment in time has my 'old' faithful YS110s sat in the nose.
As you can imagine the marrying of a 4.2kg aerobat with the lightest
MOST powerful engine in it's class always makes my giggle like a
schoolgirl whenever I take her to the flying field such is the sheer
power of the thing.
If you search you tube for 'Johnnies QQ Yak' you'll see what I mean.
I'm in the process of converting her to Electric with this motor and
an 8 cell setup with a dlux 120 amp hv esc but reserve the right to switch to ten cells later if the grin factor is not what I'm used to.
I'll keep popping back on here from time to time to update and explain my findings so keep your eyes peeled. I reckon she'll fly
her electrical maiden within the next week or so.
Meantime,
This motor that you're all looking at came to me beautifully boxed with a very nice set of fittings. I'm not too sure about the ten mm propeller adapter and have obtained an eight mm as a possible replacement subject to trying different propellers out with the setup.
I have used ecalc to obtain the rough set up figures but as this is a new(ish) motor I used the SK6354-13(250) in their database then
altered the set

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok so here's the story so far.
Although I'm a committed I.C. nut and have several small 30 sized and
3d foamy type lekky's, this is my first foray into larger stuff.
I intend this to go in my 69in QuiQue Yak 54 which at this present moment in time has my 'old' faithful YS110s sat in the nose.
As you can imagine the marrying of a 4.2kg aerobat with the lightest
MOST powerful engine in it's class always makes my giggle like a
schoolgirl whenever I take her to the flying field such is the sheer
power of the thing.
If you search you tube for 'Johnnies QQ Yak' you'll see what I mean.
I'm in the process of converting her to Electric with this motor and
an 8 cell setup with a dlux 120 amp hv esc but reserve the right to switch to ten cells later if the grin factor is not what I'm used to.
I'll keep popping back on here from time to time to update and explain my findings so keep your eyes peeled. I reckon she'll fly
her electrical maiden within the next week or so.
Meantime,
This motor that you're all looking at came to me beautifully boxed with a very nice set of fittings. I'm not too sure about the ten mm propeller adapter and have obtained an eight mm as a possible replacement subject to trying different propellers out with the setup.
I have used ecalc to obtain the rough set up figures but as this is a new(ish) motor I used the SK6354-13(250) in their database then
altered the set

Hallo ik vlieg hem met een 18x6 prop 2x4 cell 5000 trekt 70 amp.
staat op een glasair weegt 6 kg. Zeer degelijke motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hallo ik vlieg hem met een 18x6 prop 2x4 cell 5000 trekt 70 amp.
staat op een glasair weegt 6 kg. Zeer degelijke motor.

My first SK3, bought with much trepidation because of some of the negative reviews.
8 flights in on 8s with a 19x8 in an extreme flight 70" extra can report myself very happy. Pulling 2300 watts - but rarely touch full throttle in flight. Am moving the motor to a 30cc Yak to give it a work out!

Will consider other motors from the range when I get around to replacing my Zenoah 62

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My first SK3, bought with much trepidation because of some of the negative reviews.
8 flights in on 8s with a 19x8 in an extreme flight 70" extra can report myself very happy. Pulling 2300 watts - but rarely touch full throttle in flight. Am moving the motor to a 30cc Yak to give it a work out!

Will consider other motors from the range when I get around to replacing my Zenoah 62

  1. 1
  2. 2
Customer files
No File Name Download [70]
SK3-6354(DT5025-14P) MOTOR (edited).pdf Download [117]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save