New Items Новости ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy B6 PRO 50W 6A Баланс зарядное устройство (черный)

Turnigy B6 PRO 50W 6A Баланс зарядное устройство (черный)

Discontinued Product

Please continue searching for a similar product.
SKU:
9070000042-0
WANT FREE SHIPPING? Click here to find out more!

Turnigy B6 PRO Карманный зарядное устройство является многофункциональным, высоко портативное зарядное устройство / разрядник и балансир для Li-XX, Ni-хх и свинцово-кислотных батарей.

Он упакован с функциями, которые позволяют ему заряжать и контролировать состояние ваших батарей.

B6 Pro способен зарядить до 6 клеток Lixx (1 ~ 15 Ni-хх) упаковывает в количестве 0,1 ~ 6,0 Ампер. Он будет заряжаться от 0,1 до 6,0 ампер и это зарядное устройство может хранить данные до 5 батарей во внутренней памяти для вашего удобства.

Он имеет защиту от входного напряжения, чтобы не придавить автомобильного аккумулятора при мониторинге поля и температуры (зонд не входит в комплект.) Он также заряд для хранения вы пакеты, когда вы не используете их.

B6 PRO может питаться от любого подходящего источника питания поставляя от 11 ~ 18V DC. Она поставляется в диапазоне от 4 ярких цветов для удобного расположения и идентификации.

Особенности:
• Таймер безопасности
• Емкость Limit
• Контроль температуры
• Контроль входной мощности
• мониторинг Индивидуальные ячейки
памяти • 5 батареи
• 2-я линия подсветкой ЖК-дисплей
• Встроенный в Балансировщиком для 6S пакетов
• Цикл зарядки / разрядки (не доступен для Li-хх клеток)
• Включает в себя "Fast" & "Хранение" Li-хх программ
• Легко использовать

Технические характеристики:
Максимальная мощность: 50 Вт
Максимальный разряд: 5W
Балансировка ток: 300mAh / ячейку
Входное напряжение: 10 ~ 18V DC
Ni-Cad / Ni-MH: 1 ~ 15 клеток
Li-Ion / Li-Po / Li-Fe: 1 ~ 6серии
PB / свинцовокислотную: 2 ~ 20V
Ток заряда: 0.1 ~ 6.0A
Выгрузка ток: 0.1 ~ 1.0A
Разъемы Остаток: JST-XH разъемы
Количество циклов: до 5 циклов (не доступно для Li-хх клеток)
Размеры: 137 х 74 х 26мм
Вес: 164g

Включает:
1 х Turnigy B6 Pro Карманный зарядное устройство
1 х XT60 Разъем для зарядки свинцово
1 х XT60, чтобы крокодил адаптер
1 х вход Аллигатор клип Свинец
1 х Glow / Futaba / JST адаптер
1 х Всестороннее руководство по эксплуатации


Питание не входит

  • Артикул 9070000042-0
  • Brand Turnigy
  • Емкость ( мАч ) -
  • вес 360.0000
  • длина 160.00
  • Packaging Width 30.00
  • Высота 130.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Really cheap, and does everything you would expect from a 50W general charger. It even does IR measuring tough not really accurately. Generally good but it can get very hot (up to 85 Celsius) especially during discharging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really cheap, and does everything you would expect from a 50W general charger. It even does IR measuring tough not really accurately. Generally good but it can get very hot (up to 85 Celsius) especially during discharging.

It's a great charger if you only want to charge up to 3.4amps, I've had it a few months now and it was great for charging my 1500mw 4s. but then I got a parallel charger so was trying to charge 6000mw at once (6 amps) but the max it will do is 3.4 amps, this makes the charging really slow. very disappointed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a great charger if you only want to charge up to 3.4amps, I've had it a few months now and it was great for charging my 1500mw 4s. but then I got a parallel charger so was trying to charge 6000mw at once (6 amps) but the max it will do is 3.4 amps, this makes the charging really slow. very disappointed.

..................................................................................................................................................................................................................................................................

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

..................................................................................................................................................................................................................................................................

Cheap 50W charger, good for small batteries. can charge 6S at about 2.1A.



it is very quiet cos it has no fan, but gets warm too. it has also internal resistance measure program, the rest is same as any other 50w charger

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap 50W charger, good for small batteries. can charge 6S at about 2.1A.



it is very quiet cos it has no fan, but gets warm too. it has also internal resistance measure program, the rest is same as any other 50w charger

Amazing charger for all beginner pilots. Chargers lipos fast but the only down side is the discharging of batteries but if you fly till storage voltage its fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing charger for all beginner pilots. Chargers lipos fast but the only down side is the discharging of batteries but if you fly till storage voltage its fine.

Great charger especially for the price. it charges my 3s 2200mAh in a little over 45 mins.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great charger especially for the price. it charges my 3s 2200mAh in a little over 45 mins.

It arrived yesterday, it has the same menu as all the other similar chargers, it has an aluminium backing plate, I assume it's for heat dissipation, seems to be working fine, I will report back after I put a few battery's through it, for au$14 I don't think I'll be complaining *-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It arrived yesterday, it has the same menu as all the other similar chargers, it has an aluminium backing plate, I assume it's for heat dissipation, seems to be working fine, I will report back after I put a few battery's through it, for au$14 I don't think I'll be complaining *-)

i bought 9070000042-0 (black) and have some problems:

1.) storage mode is set at 3.7V per cell ... but recommended is 3.85V
2.) discharge mode is set at 3.0V per cell ... little too low
3.)no calibration menu ... why??

no firmware update from HobbyKing, only return

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought 9070000042-0 (black) and have some problems:

1.) storage mode is set at 3.7V per cell ... but recommended is 3.85V
2.) discharge mode is set at 3.0V per cell ... little too low
3.)no calibration menu ... why??

no firmware update from HobbyKing, only return

I bought this charger so I could charge a 2S 180mAh Lipo at 1C charge rate, but it is a suitable replacement for my other charger. Not many can charge at less than 1A, but this one can charge at 0.1A. A large aluminum heat sink is on the backside of the case. Charging voltages were measured to be very accurate (only 4S was tested). The provided manual is well written in English, but the author doesn't fully understand the subject (several mistakes were found in the programming diagram). Mine was improperly manufactured such that the balance port couldn't accept balance connectors with balance plug savers installed. From looking at all the photos, it appears that they all improperly manufactured that way. I was able to repair mine for balance savers with some partial de-soldering and re-soldering. The DC connector takes a 5.5mm x 2.5mm plug. An AC adapter from an IBM Thinkpad (part #92P1017, 16VDC/ 4.5A/72W) with 5.5mmx2.5mm plug is well suited for this charger and can be found new/used for about $6USD delivered on a popular Auction web site. For the low price, this charger/discharger is hard to beat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this charger so I could charge a 2S 180mAh Lipo at 1C charge rate, but it is a suitable replacement for my other charger. Not many can charge at less than 1A, but this one can charge at 0.1A. A large aluminum heat sink is on the backside of the case. Charging voltages were measured to be very accurate (only 4S was tested). The provided manual is well written in English, but the author doesn't fully understand the subject (several mistakes were found in the programming diagram). Mine was improperly manufactured such that the balance port couldn't accept balance connectors with balance plug savers installed. From looking at all the photos, it appears that they all improperly manufactured that way. I was able to repair mine for balance savers with some partial de-soldering and re-soldering. The DC connector takes a 5.5mm x 2.5mm plug. An AC adapter from an IBM Thinkpad (part #92P1017, 16VDC/ 4.5A/72W) with 5.5mmx2.5mm plug is well suited for this charger and can be found new/used for about $6USD delivered on a popular Auction web site. For the low price, this charger/discharger is hard to beat.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking