Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Turnigy D3542 / 5 1250KV Brushless Походный Мотор

Turnigy D3542 / 5 1250KV Brushless Походный Мотор

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 164,45 руб.
Stock:
Вес:
185 g
Артикул:
D3542-51250

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара
Turnigy D3542 / 5 1250KV Brushless Походный Мотор


Спекуляция
Батарея: 2 ~ 4 Cell /7.4~14.8V
RPM: 1250 кВ
Максимальный ток: 46A
Нет тока нагрузки: 3A
Максимальная мощность: 665W
Внутреннее сопротивление: 0,021 Ом
Вес: 130г (включая разъемы)
Диаметр вала: 5мм
Размеры: 35x42m
Проп размер: 7.4V / 11x7 14.8V / 9x6
Максимальная тяга: 1350g

Product
Specifications

Дополнительная информация

  • Артикул:
    D3542-51250
  • Brand:
    Turnigy
  • Вес ( г )
    185.00
  • длина
    80.00
  • ширина:
    40.00
  • Высота:
    50.00
  • Kv ( об / об)
    1250.00
  • Max Токи (A)
    46.00
  • Мощность (Вт ):
    665.00
  • Длина В ( мм ):
    42.00
  • Может Длина D (мм )
    24.00
  • Максимальное напряжение (В )
    15.00
  • Вал А ( мм):
    5.00
  • Unit Weight (g):
    130
  • Диаметр С ( мм )
    35.00
  • Общая длина E (мм )
    58.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
very powerful engine, used with 3s lipo 3700 mah about 10 minutes flight with a propeller 12x6. weight of the aircraft in 1900 gr. very good ratio power price
Quality
Value
Overall
Quality
Value
Overall
Utterly useless to me. I might has well have orderd a chocolate teapot. The mounts are on the wrong side which means it has to sit in front of an engine mount and not behind it like the other aerodrives and XYH motors I have had.
Quality
Value
Overall
Quality
Value
Overall
Excellent motor! Mine survived full immersion in brackish water for 30 minutes after a flight went badly wrong. Flushed it with fresh water and then meths. The ESC did not make it!
Just run it up on the bench with a three-blade EMP 9x7.5 prop and 4S battery and the combo is doing 1070 Watts at peak with 60Amp ESC. At half throttle it easily powers my Trainstar and penetrates wind.
Quality
Value
Overall
Quality
Value
Overall
dzieuje, dobry silniczek
Quality
Value
Overall
Quality
Value
Overall
Great motor, have it on my Seagull PC-9 EP with a 9 x 7 APC(E) prop and a Turnigy Plush 40 Amp ESC. Excellent power and acceleration. I use 3S 2200mah LiPo's. If you pull instant full power on a new well charged battery for take off, it pulls about 38 Amps but once in the air the most I've pulled is 30 Amp. The most I can get up to holding it static on the ground is 40 Amp again dropping down to a comfortable 30 Amps once that initial surge drops back. The motor is well balanced and does not get hot (The PC-9 is well ventilated at the nose). Bearings seem good and smooth after a few flights. The motor looks and feels well made. Recommended. My model flies really well with good verticals and does all the aerobatics of a good sports model. Flight time with variable throttle (i.e. not flat out all the time) is around 9 - 10 minutes depending on conditions.
Quality
Value
Overall
Quality
Value
Overall
I used it to upgrade the stock 3536 960kv motor in a Parkzone Wildcat, and use it with a 60A ESC with a 3s 2200mah when using a TGY 9X7.5 prop, and 2s2p 1800mah with a APC 10x7 (for long slow flights). It probably goes around 70mph with the fast setup, and has good vertical performance. The motor is a good fit as a replacement. The two mounting screws that are furthest apart fit in the wildcat mount pattern, and I used some washers to space and stabilize the motor. The only problem is that when using the X mount, the mounting screws may damage the windings as long as they are. The shaft is strong as it stayed straight during a very hard hit that broke things and bent the aluminum adapter. The adapter fits a 5mm shaft and converts it to a 8mm with threads that fit the NTM 42 series adapter set spinner.
Quality
Value
Overall
Quality
Value
Overall
Gostei muito deste motor, mas ele consome muita bateria.
Quality
Value
Overall
Quality
Value
Overall
Motor sounded a bit cracky when turned by hand. Luckily it's opened really easy by removing the clip from the shaft and then pull the outer part from the rotor. Some metal parts were stuck on the magnets. Easy fix, run's great, fantastic price.
Quality
Value
Overall
Quality
Value
Overall
Nice quality build strong with 5 mm shaft and a good size retaining clip

Comes with nice spec sheet, only thing ,, check with a watt meter as prop sizes quoted are a little on the high side if your using good high C batteries and can easily over cook a great motor :)
Quality
Value
Overall
Quality
Value
Overall
Great little motor got it in my Ripmax spitfire, pulling 480 watts on 3s.....climbs vertical until i cant see it!!!!!

ordered another for my ripmax mustang, hope to get same performance.....

pound for pound, Turnigy are the best motor....
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.