Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Turnigy dlux 80A HV Brushless ESC w/8A SBEC and Data Logging (2s~8s)

Generating Links

Turnigy dlux 80A HV Brushless ESC w/8A SBEC and Data Logging (2s~8s)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

150,15 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
9192000368-0
Хотите бесплатную доставку? кликните сюда Узнать больше!

Turnigy® dlux ESCs are reknown for their quality and performance, so much so that this lightweight and highly versatile ESC can handle up to 8s and an extra 10A burst current with complete peace of mind. They also have a huge S-BEC capability of 6A continuous and an 8A burst current and the S-BEC is switchable from 6V to 7.4V.


These are the new generation of sensorless speed controllers with the latest software design and suitable for ALL types of brushless motors. They have extensive programming and data logging features and also offer a versatility of applications rarely seen in an ESC of this rating. All Turnigy dlux ESCs can be programmed via a programing card or by transmitter, clear and easy to understand instructions are included.


Features of the data logging are viewable when used with Turnigy dlux programming box:
Data logging display readouts:
Max Temperature
Environment Temperature
Max Current
Min Current
Max Voltage
Min Voltage
Nominal Voltage
Off Voltage
Motor Run Time
Power on Time
Motor Pole Number
Max Motor RPM
Error Times


Features:
• Extremely low internal resistance
• Will handle up to 8S
• Switchable voltage S-BEC 6~7.4V
• Powerful 6A switching BEC with 8A burst
• Mk2 version with new software design
• Very low operation temperature
• Over temperature protection
• Programming options.
• Forward/Reverse
• Soft start
• LV Cut off parameters (ignore, reduce power, stop motor)
• LV Cut off parameters (2.5~3.5V in 0.1V increments)
• Timing parameters (auto, medium, high)
• Factory restore setting to defaults
• Active RPM Control: On/Off and governor mode
• Battery: LiPo auto detect
• Low Voltage: Powers down motor at 3.2V


Specs:
Max Cont. Current: 80A
Max Burst Current: 90A
S-BEC Current: 6A with 8A burst
S-BEC Voltage: 6~7.4V switchable
LiPo: 2~8S
Timing: Adjustable
Frequency: 8Khz/16Khz
Governor: Yes
Programmable: Yes, with transmitter or program box (program box sold seperately)
Datalog: Yes
Reverse: Yes
Watercooled: No
Dimensions: 93 x 37 x 21.7mm
Weight: 113g
Motor Plug: Female 3.5mm bullet connector
Rx Plug: Std JR type connector
Battery Plug: None


Note: Programming box available, see related products.

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

H. | Проверенный покупатель

  • Overall
  • Quality
  • Value

7S 4000mAh

Jan 21, 2020

Regler bis 6S keine Probleme .
Regler bei 7S leichte Aussetzer
Regler bei 8S nicht möglich !!!!!!
Den Fehler habe ich bei mir so behoben, indem ich das
Empfänger-Kabel um 25cm verlängert habe.

NiccoNicco | Проверенный покупатель

  • Overall
  • Quality
  • Value

This is a good alternative to the yep 80A HV version.

Nov 15, 2019

This is a good alternative to the notorious yep 80A HV version. I am using it for a edf 90mm glider jet conversion and it does its job. Please consider using an external BEC for backup.

JDM | Проверенный покупатель

  • Overall
  • Quality
  • Value

Nice product

Sep 27, 2019

Turnigy makes quality escs

chris | Проверенный покупатель

  • Overall
  • Quality
  • Value

Brake doesn"t work

Apr 08, 2019

The brake feature never worked from new, and after I had used it for only one flight (without the brake), it didn't even work at all !! totally dead! Credit to Hobby king though, they gave me a full refund with no fuss at all. Thanks.

Eric | Проверенный покупатель

  • Overall
  • Quality
  • Value

The instructions are for 40a mk2

Jan 01, 2019

Only one thing, no programming box at the moment, changing the functions without this box is a little difficult or sure to have something changed.

David | Проверенный покупатель

  • Overall
  • Quality
  • Value

great price

Mar 07, 2018

good value for money for HV esc

Файлы клиентов
Turnigy dlux 80A HV Brushless ESC manual1.JPG Download [176]
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!