New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Fabrikator 3D принтер (США Plug)

Turnigy Fabrikator 3D принтер (США Plug)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000680-3
WANT FREE SHIPPING? Click here to find out more!

Turnigy Fabrikator, наш худший держится в секрете здесь; что мы не просочиться было, насколько он хорош. Это лучшее соотношение цены и качества принтера на рынке с особенностями и качеством принтеров в три раза дороже.

Нет больше 3D-технологии печати эксклюзивной сферой злостных технофилы и промышленных дизайнеров, теперь доступна любому с компьютером и возможностью поставить плоский пакет мебели вместе. Являетесь ли вы в плоскостях, мульти-роторы, автомобили, лодки, вертолеты, робототехника, поезда или даже аниме статуэтки Fabrikator скоро станет вашим самым универсальным инструментом. Не можете найти то, что редкие часть для вашей старой модели или вы просто хотите, чтобы изменить существующий кусок? Теперь вы можете напечатать то, что вы хотите, когда вы хотите.

Turnigy Fabrikator способен использовать ABS и PLA нити уже имеющийся от Hobbyking склад рядом с вами и может печатать высокое качество отделки достижимые при 150 мм / сек. Прошли те дни настройки принтера перед тем, как лечь спать, и надеясь, что работа закончена, когда вы встаете. 3D принтеры используются, чтобы быть только для опытных образцов и доказательство концепции дизайна, но теперь вы можете создавать, печатать и использовать часть во всех видах приложений.

Это невероятно хорошо проектируемых принтер показывая прочный каркас рок, супер стабильной четырехъядерный железнодорожных поддерживается печать пластины, двигатели NEMA высокого класса качества, съемная платформа из стекла печати и двойные Y диски оси ремня означает, что вы можете печатать с высокой точностью частей снова и снова, без необходимость постоянных механических регулировок.

Это не просто большая машина, мы сделали еще один шаг вперед и создали серию видеороликов, которые будут вести вас шаг за шагом, чтобы построить и настроить принтер вместе с уникальным гидом живой динамичной и обновляемым устранению неисправностей, которые доступна на вкладке ниже файлы, а потому, что Fabrikator настолько прост в использовании, вы не будете нуждаться в большой помощи.

Для того, чтобы Fabrikator как доступное, насколько это возможно для Вас мы разработали его как простой собрать плоский комплект пакет, который, если вы будете следовать превосходное руководство в сочетании с видеорядом вы будете иметь его построили в течение нескольких часов. Это так легко мы получили наименьший элемент технического персонала, чтобы положить один вместе, и он его собирается менее чем за шесть часов.

Особенности:
• Шаровой подшипник лайнера стержни
• Прокат свинцово-винт с беззазорной приводом
• Фенольные термостабилизированы кровать W / съемная площадь печати Стекло
• Нагретый печать кровать
• NEMA 23 и 17 двигателей
• 4 стержня поддерживается печать пластина для высокоскоростной печати
• 6 сторонний полную поддержку принтера для высокой точности
• Кабель SD карта бесплатно печать |
• PLA и ABS нить совместимы
• Верхняя подача анти-привязывать подачи золотника
• Двойные вентиляторы для печати
• 2A теплоотвод шаговые водителей с активным охлаждением
• 220 ~ 110V A / C совместимый
• Самонаведение и концевые выключатели
• Полный ЖК графический интерфейс с настройкой на лету
• область печати Большой 150x150x100mm
• Двойной подшипник поддерживается твин ремень Y оси привода
• Heavy Duty 12Volt 29Amp Электропитание
• Open Source Архитектура управления и поддержка
• Полная поддержка частей и будущее платформы расширяемость

Технические характеристики:
Общий размер: 360x400x600mm
Размер печати: 150x150x100mm
Диаметр сопла: 0,4 мм
Нить диаметр: 1.75mm
Скорость печати: до 300 мм / сек
Печать Платформа: Фенольные термостабилизированы кровать со съемной стеклянной платформой для печати
Тип Волокно: ABS и PLA

Необходимые:
Волокно по вашему выбору

*** Ссылка на Руководство по ***

  • Артикул 9171000680-3
  • Brand -
  • Емкость ( мАч ) -
  • вес 19200.0000
  • длина 160.00
  • Packaging Width 35.00
  • Высота 120.00
  • Turnigy Fabrikator 3D Printer
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I picked this up during the Black Friday sale for about 1/2 price. The build was straight forward and only took a couple of hours. After spending some time on alignment I fired it up and tried a few test prints. Quality was decent, but the extruder needed some calibration to tweak the factory settings. Now it prints great with both PLA and PET filament. Frankly, the quality, functionality, and performance are much more than I expected to get for about $200. I have now gone through about 2.5kg of filament without any significant issues.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I picked this up during the Black Friday sale for about 1/2 price. The build was straight forward and only took a couple of hours. After spending some time on alignment I fired it up and tried a few test prints. Quality was decent, but the extruder needed some calibration to tweak the factory settings. Now it prints great with both PLA and PET filament. Frankly, the quality, functionality, and performance are much more than I expected to get for about $200. I have now gone through about 2.5kg of filament without any significant issues.

This was my first 3D printer but it was well worth it. I like the fact that it was a DIY printer and assembly was straight forward and the online videos were nice touch but not needed. The only thing that help me was when printing with Cura that you set the proper filament size as you get really bad print if you don't. Bed leveling is a pain but that's with most printers. I like the fact that it used a controller that has been used on a number of 3d printers making modifications and understanding a little simpler. It would have been nice to have a parts list as I feel that once the print head goes I will have issues trying to replace it. I think this is the last of this printer as I think I have printer 179 of 200 and there will be no more. No spare parts are listed for this unit except the controller is available from many sources as this is common to many 3d printers. Great unit and a great printer to get into 3d printing. I am learning a lot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was my first 3D printer but it was well worth it. I like the fact that it was a DIY printer and assembly was straight forward and the online videos were nice touch but not needed. The only thing that help me was when printing with Cura that you set the proper filament size as you get really bad print if you don't. Bed leveling is a pain but that's with most printers. I like the fact that it used a controller that has been used on a number of 3d printers making modifications and understanding a little simpler. It would have been nice to have a parts list as I feel that once the print head goes I will have issues trying to replace it. I think this is the last of this printer as I think I have printer 179 of 200 and there will be no more. No spare parts are listed for this unit except the controller is available from many sources as this is common to many 3d printers. Great unit and a great printer to get into 3d printing. I am learning a lot.

I have to say I am absolutely blown away at this printer. I picked it up for $220 shipped on the cyber week deals ( There was no way I could pass this up). I had it assembled in about 10 hours. The manual did a fairly good job for the assembly procedure - I did watch a few of the build it series videos on youtube direct from Hobbyking and that cleared up any issues with the build process. If you stick to the correct build process outlined in the manual and videos you should have no issues out of the gate.

I have been using it for a few weeks now with both PLA and ABS (Hatchbox brand from Amazon) and it is working flawlessly. The printing resolution for such a cheap (cost wise) printer amazes me...not to mention the features that even a lot of the more expensive printers don't have.

There were a few things that I feel could eventually be improved - Such as adding lights - I added a small white LED strip and it lights up the print bed really well. I would have also personally like to see the acrylic frame painted or something - while the transparent frame is initially cool - it screams DIY vs finished product. I would also like to see doors for the front and side so that they can be closed when printing certain materials to prevent drafts from flowing through.

All in all I would have to honestly say this was my best hobby related purchase of 2015.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have to say I am absolutely blown away at this printer. I picked it up for $220 shipped on the cyber week deals ( There was no way I could pass this up). I had it assembled in about 10 hours. The manual did a fairly good job for the assembly procedure - I did watch a few of the build it series videos on youtube direct from Hobbyking and that cleared up any issues with the build process. If you stick to the correct build process outlined in the manual and videos you should have no issues out of the gate.

I have been using it for a few weeks now with both PLA and ABS (Hatchbox brand from Amazon) and it is working flawlessly. The printing resolution for such a cheap (cost wise) printer amazes me...not to mention the features that even a lot of the more expensive printers don't have.

There were a few things that I feel could eventually be improved - Such as adding lights - I added a small white LED strip and it lights up the print bed really well. I would have also personally like to see the acrylic frame painted or something - while the transparent frame is initially cool - it screams DIY vs finished product. I would also like to see doors for the front and side so that they can be closed when printing certain materials to prevent drafts from flowing through.

All in all I would have to honestly say this was my best hobby related purchase of 2015.

I got this on Black Friday.
Arrived in its amazing packaging, in perfect condition.
I carefully assembled it over the course of 3 evenings. I followed the manual and the videos (which are great).
Dont be naive and think that this is a "turn key" process...3D printing is a bit of an art that deals with temperature and flow, coupled with good machine alignment.
Read the manual, carefully connect and route your cables. The sensor inputs matter a great deal. Eliminate noise in the motor cables as much as possible.. be tidy..
I am having a blast with this thing and I am planing to press the resolution higher by using a .02 nozzle.. if it works.. well.. i will be supper happy.. if it doesn't.. it is just fine how well it works.

MEGA HINT; MEASURE THE AVERAGE WIDTH OF THE FILAMENT YOU USE. Enter the proper value on the software you use to slice...
Tram all bearings.. level the plate.. home-position will need to be adjusted depending on the resolution you use.. keep an eye on it.
Good luck with the learning curve.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got this on Black Friday.
Arrived in its amazing packaging, in perfect condition.
I carefully assembled it over the course of 3 evenings. I followed the manual and the videos (which are great).
Dont be naive and think that this is a "turn key" process...3D printing is a bit of an art that deals with temperature and flow, coupled with good machine alignment.
Read the manual, carefully connect and route your cables. The sensor inputs matter a great deal. Eliminate noise in the motor cables as much as possible.. be tidy..
I am having a blast with this thing and I am planing to press the resolution higher by using a .02 nozzle.. if it works.. well.. i will be supper happy.. if it doesn't.. it is just fine how well it works.

MEGA HINT; MEASURE THE AVERAGE WIDTH OF THE FILAMENT YOU USE. Enter the proper value on the software you use to slice...
Tram all bearings.. level the plate.. home-position will need to be adjusted depending on the resolution you use.. keep an eye on it.
Good luck with the learning curve.

I bought this printer recently during HK's Cyber Sale, and I'm extremely pleased with the purchase. The materials, component dimensions, assembly process, and setup are all excellent. I watched all of the assembly and tip videos on YouTube, used the whole manual during assembly, and took extra time to make sure everything was aligned as best as possible. My first test prints, a few holiday cookie cutters from Thingiverse, printed perfectly. I really think Hobbyking did a great job pulling this kit together and made it easy for someone to get started in 3D printing. I have no reservations recommending this product to anyone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this printer recently during HK's Cyber Sale, and I'm extremely pleased with the purchase. The materials, component dimensions, assembly process, and setup are all excellent. I watched all of the assembly and tip videos on YouTube, used the whole manual during assembly, and took extra time to make sure everything was aligned as best as possible. My first test prints, a few holiday cookie cutters from Thingiverse, printed perfectly. I really think Hobbyking did a great job pulling this kit together and made it easy for someone to get started in 3D printing. I have no reservations recommending this product to anyone.

I got mine during the cybersale, so it was an incredible value. The instruction manual is written in clear English, not translated like some products I have purchased from China. The only thing I need the video for was plugging in the motors since the manual is in black and white. There weren't enough zip-ties in my kit, but there were some stick on wire clips that I could have used if I had noticed them instead of following the instructions.

My first print failed because one of the fans didn't have a good connection and the edges of the print curled up. I was using PLA and hairspray on the bed. It seems to be working perfectly now.

The unit has been running for seven hours with no problems from any of the components.

I highly recommend this kit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got mine during the cybersale, so it was an incredible value. The instruction manual is written in clear English, not translated like some products I have purchased from China. The only thing I need the video for was plugging in the motors since the manual is in black and white. There weren't enough zip-ties in my kit, but there were some stick on wire clips that I could have used if I had noticed them instead of following the instructions.

My first print failed because one of the fans didn't have a good connection and the edges of the print curled up. I was using PLA and hairspray on the bed. It seems to be working perfectly now.

The unit has been running for seven hours with no problems from any of the components.

I highly recommend this kit.

I was able to get this on sale for $219.99!! All I can say is WOW!! What a great deal! It took about 6hrs to put it together and get it running. The kit was very complete and everything looks to be of very good quality. I was actually very impressed with everything from the packaging, instructions, on-line videos, fit and finish of the parts and it work great too!! The only thing that took some extra fiddling was getting the gap between the bed and print head just right. I found they needed to be a little closer together than what the instructions indicated. After that I was printing with great results!! I honestly couldn't be happier with my purchase!! Thanks Hobby King!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was able to get this on sale for $219.99!! All I can say is WOW!! What a great deal! It took about 6hrs to put it together and get it running. The kit was very complete and everything looks to be of very good quality. I was actually very impressed with everything from the packaging, instructions, on-line videos, fit and finish of the parts and it work great too!! The only thing that took some extra fiddling was getting the gap between the bed and print head just right. I found they needed to be a little closer together than what the instructions indicated. After that I was printing with great results!! I honestly couldn't be happier with my purchase!! Thanks Hobby King!!

I am definitely the kind of person who's opinion is directly affected by price. The fact that I have bought 5 of these and my 1st has hundreds of hours of easy printing without fail, makes the $400 tag almost unbelievable. But believe it! Probably the best $ I've ever spent. I love this printer more every day. Recommend 100pcnt.
Now I'm kinda scared to buy a bigger printer in fear it will suck in comparison and price value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am definitely the kind of person who's opinion is directly affected by price. The fact that I have bought 5 of these and my 1st has hundreds of hours of easy printing without fail, makes the $400 tag almost unbelievable. But believe it! Probably the best $ I've ever spent. I love this printer more every day. Recommend 100pcnt.
Now I'm kinda scared to buy a bigger printer in fear it will suck in comparison and price value.

I bought an early one at 314.30 and was impressed with the packaging and how fast it was to assemble. Problem was, it didn't work. The instructions are excellent up to the point that you turn it on, then it gets fuzzy. Turns out my problem was that four of the motor controllers were faulty. I bought five on EBay at $10 total. Yes, they are that cheap. Once they were adjusted, this printer worked extremely well. Its been printing for a couple weeks now and I'm getting the tuning better and better using Reptier and Cura. This printer has many great features, uses components that are easily available and is worth 3X what I paid. Yes, I had issues but the price outweighs it. 5 stars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought an early one at 314.30 and was impressed with the packaging and how fast it was to assemble. Problem was, it didn't work. The instructions are excellent up to the point that you turn it on, then it gets fuzzy. Turns out my problem was that four of the motor controllers were faulty. I bought five on EBay at $10 total. Yes, they are that cheap. Once they were adjusted, this printer worked extremely well. Its been printing for a couple weeks now and I'm getting the tuning better and better using Reptier and Cura. This printer has many great features, uses components that are easily available and is worth 3X what I paid. Yes, I had issues but the price outweighs it. 5 stars.

anyone else notice that there is only one magnet limit switch actuator on the print bed and 2 sets of holes. because of this oversight the lower limit switch can not be triggered. There is not enough adjustment in the lower limit switch to be triggered by just one actuator a second actuator installed in the second set of holes would solve this problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

anyone else notice that there is only one magnet limit switch actuator on the print bed and 2 sets of holes. because of this oversight the lower limit switch can not be triggered. There is not enough adjustment in the lower limit switch to be triggered by just one actuator a second actuator installed in the second set of holes would solve this problem.

  1. 1
  2. 2
Customer files
Fabrikator Q&A Download [228]
Fabrikator Q&A Download [228]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!