Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Turnigy G10 Brushless Походный 1200kv

Turnigy G10 Brushless Походный 1200kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
210 g
Артикул:
G10-1200

Combine

essential items and
acc
Описание
товара

Разработанный, чтобы быть прямым выгрузить для двигателей размера Парк .10. Бесщеточный скороход Turnigy EasyMatch G10 обеспечит большую мощность и более длительное время бежать с его высокой эффективностью.
Качественный двигатель, построенный специально для самолетов, предназначенных для летать с .10 тлеющих двигателей.

Спекуляция
Батарея: 2 ~ 4 Cell /7.4~14.8V
RPM: 1200kv
Максимальный ток: 52A
Watts: 375w
Нет ток нагрузки: 11.1V / 2.2A
Внутреннее сопротивление: 0,02 Ом
Вес: 140г
Диаметр вала: 5мм
Размеры: 35x51mm

Данные испытаний:
11.1V - 11X5.5 Prop - 53A - 2140g Упорный
11.1V - 10х5 проп - 41A - 1800g Упорный

Product
Specifications

Дополнительная информация

  • Артикул:
    G10-1200
  • Brand:
    Turnigy
  • Вес ( г )
    210.00
  • длина
    90.00
  • ширина:
    48.00
  • Высота:
    52.00
  • Kv ( об / об)
    1200.00
  • Max Токи (A)
    52.00
  • Мощность (Вт ):
    375.00
  • Длина В ( мм ):
    51.00
  • Может Длина D (мм )
    26.00
  • Максимальное напряжение (В )
    15.00
  • Вал А ( мм):
    5.00
  • Unit Weight (g):
    140
  • Диаметр С ( мм )
    35.00
  • Общая длина E (мм )
    67.00
  • Сопротивление ( тк ):
    2.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
buen motor y de buen rendimeinto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor is powerfully

3s bettery on 10x5 prop.

thrust is 2100g

very happy!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I think the wattage reported here is incorrect. At ~50A I was measuring ~490w with a 3S 20C 3.7A lipo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered two G-10's, the first one ran fine on a 3 cell but about a minute after flying on a nano-tech 2200 - 4 cell several magnets came loose causing the motor to stop but for that one minute I was tearing up the skys! I put the other G-10 in and powered it with the same battery and within a minute same thing! Magnets came loose causing the motor to stop. I wish I got my motors from the same lot the other reviewers got theirs!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
using on a 900mm cap 232 750 gram total weight 14.8 volt 60 esc 9x6 pushing 150 kmph great motor barely warm
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect match to replace the motor of most ParkZone Birds.
Used one in the T28 and Corsair with success.
Factory Prop - current around 40amps and lots of thrust.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Turnigy G10 Brushless Outrunner 1200kv
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this motor to go on my Great Planes 48" Supersporster that's been sitting in a closet for over a year. I had to make a modification to the motor mount but other than this it fit the plane fine. The motor looks all fine and dandy, but the first thing I noticed was that the G10 label is just a sticker and was coming off, so I just pulled it off. Whatever. Next, running the motor with a 3s Zippy Compact 3300 35C and a Phoenix Talon 90 ESC. A little much ESC but a safe one none the less. I had the plane in the sky 11 times for 5 to 7 minutes and everything came back good. Im running a 12x6 prop and drawing 46 amps and 330ish watts. Well on flight 12 today, ALL of the magnets in the can slipped back and started grinding against the housing of the motor. I have heard of this happening from others with one magnet, but damn. The motor seized in flight and I was able to get the plane back to the runway in tact. Regardless, pulled the motor apart and all of the magnets have slipped 1/8 of an inch toward the rear of the can. I pushed them back in and tried again, but same issue. Not very happy with the motor. I have the G15 and the G25 sitting in a box for the next project but dont think I will be risking my stuff with these motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought an engine and put these in a low wing aero, made at home. In the third flight dropped a magnet into the engine. Glued with epoxy and everything ok. The engine is strong. Use it with two pack 2200mah 35C 4S in parallel. Autonomy 6 minutes with prop 9x6 JF.
Video follows: http://www.youtube.com/watch?v=5tiYNh2p4UU

Hugs!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe den Motor in eine Parkzone ME109 eingebaut mit einem Turnigy Plush 60 A Regler. Bei 50pcnt Reglerffnung bringt der Motor schon mehr Schub als der Originalmotor bei Vollgas. Danke an HK
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.