Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Turnigy G60 Brushless Походный 300kv (+0,60 Glow)

Turnigy G60 Brushless Походный 300kv (+0,60 Glow)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

3 181,49 руб.
Stock:
Вес:
532 g
Артикул:
G60-300

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Разработанный, чтобы быть прямой замены для Вашего .60 размера тлеющего двигателя. Бесщеточный скороход Turnigy EasyMatch G60 обеспечит большую мощность и с высокой эффективностью, времена долгосрочной перспективе.
Качественный двигатель, построенный специально для самолетов, предназначенных для летать с двигателем 0,46 ~ 0,62 тлеющем.

Спекуляция
Батарея: 5 ~ 7 Cell /18.5~25.9V
RPM: 300kv
Максимальный ток: 60A
Нет ток нагрузки: 11V / 1.2A
Текущая емкость: 60A / 15сек
Внутреннее сопротивление: 0,04 Ом
Вес: 360g (не включая разъемы)
Диаметр вала: 6мм
Размеры: 81x50mm

Данные испытаний:
18.5V - 14x10 проп - 17A - 1600g Упорный
18.5V - 15x8 проп - 17A - 1950g Упорный
22.2V - 13x8 проп - 16A - 1650g Упорный

Product
Specifications

Дополнительная информация

  • Артикул:
    G60-300
  • Brand:
    Turnigy
  • Вес ( г )
    532.00
  • длина
    125.00
  • ширина:
    90.00
  • Высота:
    100.00
  • Kv ( об / об)
    300.00
  • Max Токи (A)
    60.00
  • Мощность (Вт ):
    1425.00
  • Длина В ( мм ):
    59.00
  • Может Длина D (мм )
    30.00
  • Максимальное напряжение (В )
    26.00
  • Вал А ( мм):
    6.00
  • Unit Weight (g):
    360
  • Диаметр С ( мм )
    50.00
  • Общая длина E (мм )
    81.00
  • Сопротивление ( тк ):
    0.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
A really great motor for my seagull christen husky, wingspan 2m, 4,8kg flying weight.

I use it with a 16x10 3blade Master Airscrew @ 6s Zippy Lipo
Quality
Value
Overall
Quality
Value
Overall
This is a brute of a motor. I am running a 15x8 prop on 6S(22.2v) and its only pulling 25 Amp max. Haven't measured the thrust but it flies my Hangar 9 RV-8 with no worries and the slower larger prop sounds a lot better.
Quality
Value
Overall
Quality
Value
Overall
Amazing product, not only is the overall look of the motor high quality, but the preformance is as well. The mount it comes with is also really nice and is dpaces like the mount holes on most 60. Size engines so in some cases it will be a firect fit. The mounting hardware it comes with is also pretty nice, my only complaint is that it came with no plugs. Oh well. The eflite equivilant is twice the price and same preformance. A great product overall. Oh and p.s. ALWAYS USE BLUE THREADLOCK ON THE MOTOR MOUND AND PROP ADAPTER!!!
Quality
Value
Overall
Quality
Value
Overall
I got this motor today (from the US warehouse) for an air boat and immediately tried it out with a 16x6 prop, turnigy 150 amp esc and a 5000mah 6s lipo, and it ran great! the motor got just warm enough to be almost uncomfortable to touch and got the boat (a body board for the ocean with a tower screwed to it) to run along nicely at about 25 mph. The only problem I had with the motor was the mounting screws came loose but I should have used thread lock in the first place. I will try a few different props and post my results.
Quality
Value
Overall
Quality
Value
Overall
I got this motor today for an air boat and immediately tried it out with a 16x6 prop, turnigy 150 amp esc and a 5000mah 6s lipo, and it ran great! the motor got just warm enough to be almost uncomfortable to touch and got the boat (a body board for the ocean with a tower screwed to it) to run along nicely at about 25 mph. The only problem I had with the motor was the mounting screws came loose but I should have used thread lock in the first place. I will try a few different props and post my results.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.