Turnigy Интегрированная PCB Micro-Quad (KIT)

• Overall
• Quality
• Value

Customer Rated

Feb 14, 2014

This PCB frame is a piece of crap. It could not survive 30cm fall - after that one motor mount was broken.
This construction has a major design flaw: the hole for motor wires are placed inline with the end of the ribs - which are too short and to thin.

Maybe my frame was faulty, but when You look closer this is not sturdy FR-4

If You must have a microquad, go buy black one with integrated ESC and BEC

• Overall
• Quality
• Value

Customer Rated

Jul 09, 2013

Flew great until I crashed it from 5 feet off the ground. The motor mount is not sturdy and broke clean off. The motor mount design saved a 50 cent prop but cost me a 15 dollar frame.

• Overall
• Quality
• Value

Certified Buyer Rated

May 22, 2013

Fun little quad but kind of a pain to do all that soldering. 34 of them all together including the battery connecter. Plenty of room for a 50mm FC and RX. Indoor flyer for sure.

• Overall
• Quality
• Value

Customer Rated

May 16, 2013

It is well made and all, but the construction is deeply flawed. The motor mounts will break off at first impact, since someone made the bad decision to put a hole at the thinnest point. There are only a few millimeters of PCB on each side of the hole. You can easily snap it off without applying much force at all.
If you glue something on top of the hole, the complete arm will break off at the base, tearing the copper laminate. It is easy enough to repair with thin CA and some jumper wires, but the repaired places breaks even easier.
I strongly suggest building your own frame out of some scrap plywood and four 1/16 (8mm) wood spars or buying a more robust frame kit.

• Overall
• Quality
• Value

Customer Rated

May 01, 2013

Great PCB frame, lightweight with the 1811 - 2900 motors, 5x3 props, KK2 FCB, 2S 800mAh LiPo. About 6 min flight time indoors and fast and mild acro outdoors with 6 mins. I will get a 1300 mAh 2S with my next order, the little beast can handle these LiPos easily. Great for any place at any time flying and having fun.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 13, 2013

very good quad ! good shipping

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 19, 2013

Good frame kit, easy to assemble, werry helpful with the onboard pcb for power destribution. Did not fly yet because of propeler problems, hope to get it in the air soon.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 12, 2013

nice and small quad... nice to fly indoors... really impress with the way it was packed!!!

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2013

Cool Gadget this Frame but the Motor Extensions are a bit fragile. Just Stiffen the end connections with 2k Epoxy and nothing will break. Even with hard Landings.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 04, 2012

This little frame is delivered in a surprisingly flat envelope! It may seem a bit fragile at first but some of the pieces interlock and a few drops of CA later the frame is quite sturdy.

I like the dome on top that will protect your control board in the event of a crash.

I also like the bars between the legs of the structure where you can easily strap a battery.