Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

Turnigy Встроенный разъем PCB и Play Micro-Quad (P & P)

Turnigy Встроенный разъем PCB и Play Micro-Quad (P & P)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
499 g
Артикул:
9171000021

Combine

essential items and
battery
motor
acc
Описание
товара

***** Этот пункт в настоящее время продается, но не отчаивайтесь! Micro-Quad V2 находится на пути , и включает в себя новый KK2.0 LCD контроллер полета экран!

Этот крошечный еще блестяще разработан P & P микро Quad позволяет получать в хобби-класса quadcopters легко! Мы сделали всю тяжелую работу за вас, выбирая систему питания, установка двигателей / ЭСК, паять все соединения и монтажа / настройки платы управления.

Это квад реальное дело, а не игрушка-иш микро с рифленой двигателей и мило оболочек тела. Он оснащен системой бесщеточный питания высокой производительности и очень способным, полностью программируемый HobbyKing Multi-Rotor платы управления.

С Turnigy встраиваемый модуль на печатной плате и Play Micro Quad, вам просто нужно добавить свой собственный 4CH передатчик / приемник, аккумулятор 500-900mAH 2S 7.4V LiPoly, настройки вашего радио, завершить проверку до полета, установите пропеллеры, и вы готовы летать!

Особенности:
Облегченная конструкция
Высокая эффективность системы бесщеточный мощность предустановлен
Интегрированная конструкция рамы PCB для аккуратного разводке
P & P конфигурация принимает догадки из выбора собственных компонентов

В коробке:
1 х Turnigy Интегрированная PCB вилки и летать Micro Quad (двигатели / ЭСК / плата управления предварительно установлена)
4 х пропеллеры (2CW & 2CCW)
4 х сервоприводов удлинители (для подключения приемника к плате управления)

Необходимые предметы:
Батарея 500-900mAh 2S 7.4V LiPoly
4 канальный передатчик и приемник
Зарядное устройство

Технические характеристики:
Ширина: 250мм
Высота: 85мм
Двигатель: 4 х Turnigy Brushless T1811-2900kv
ESC: 4 х Turnigy Плюшевые 6A
Реквизит: 4 х 5х3 дюйма (2CW & 2CCW)
Совет управления: Hobbyking Multi-Rotor Control Board (конфигурация X)
Подключение батареи: JST


* Примечание:
Руководство пользователя находится на вкладке "Файлы" ниже

Product
Specifications

Дополнительная информация

  • Артикул:
    9171000021
  • Brand:
    Не применимо
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    499.00
  • длина:
    232.00
  • ширина:
    100.00
  • Высота
    232.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The quad flys well. Only the motor mount tabs are very weak, i glued them with carbon fiber strips. Also the flight controller board is mounted without shock absorber. I used the following start setup:
Roll 45pcnt, Pitch 20pcnt Yaw 75pcnt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
To say that this is ready to fly is an exggeration. I had to upgrade the firmware of mine to even get lift off, it came with a borked setup.

One of the motors are "lazy" and tend to not rev as hard as the other three, causing it to fall over on full throttle and will sometimes start the prop backwards when going from a full stop.

The ESCs are set to hard cutoff when the battery is low, and will quite simply drop dead in mid air.

However.. After a lot of tweaking and six broken props, it now flies REALLY well. Remains controllable in pretty heavy winds although the battery died real fast.

Has a nice 50pcnt throttle hover just like quad people tend to recommend.
Would probably lift a go pro bullet or even the full go pro camera.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aprs 1 mois d'utilisation,
ce quad est adorable ; on peut l'emmener partout.
Dommage que la valise en alu ne soit pas dans le package ; cela aurait t parfait.
J'ai vu qu'il existait une version hexa ; je vais de ce pas commander 2 moteurs, 2 ESC et le programmateur de la carte pour tester.
Bons Vols
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just maidened mine two days ago. OMG this is like crack! But I went through quite a lot more setup than expected and ended up doing a major modification to add carbon fiber arms (see attached photo).

There were three problems:
1) Gyro setups: yaw had to be reversed (procedure is explained in the manual). The pitch and roll gyro gains were way too large causing it to ocillate. After turning the pots down it is *very* stable.

2) The PCB material is very brittle for arm material. Broke an arm on the second flight. After a lot of glue later I decided to replace all four with carbon fiber extensions bolted down (see photo in files). Now its rock solid.

3) The power leads are not tethered/constrained at all. Both broke before even the first flight trying to tie down the battery. Beef up the solder and add tie straps!

I'm flying with the 850mah nano techs and get 8:30 min flights! This thing is so awesome now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super der Zwerg!! Fliegt sich perfekt und das gleich aus dem Karton!
Verarbeitung ist auch top!
Kann ich jedem Empfehlen!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
not so plug and play, be prepared to fiddle with the board, learn how to change the gyro directions and look up witch way the motors should spin.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bozos,

I finally got my new 250 mm HK quad into the air after, lets say, about half an hourish of tinkering. A slight adjustment to the rolling plane gyro was necessary for perfect stable hover/flight.

Robbie was there and his mouth is still open.

This is an impressive li'll unit and is much more sophisticated than the MQX equivalent. It is equally as stable and flys just as well, in my garage. I'll try it in open spaces later in the week. I have no doubt that it is as quick and manoeuvrable as the MQX. Neither like the wind.

Any one considering getting an MQX ($160), or equivalent should review this unit first.

Don't misunderstand me, I love my MQX and it's 10 minute plus flight times are far superior to this unit.

I believe the motors in the MQX are brushed coreless. The board is integrated with no separate components.

This unit consists of the following separate components. Four brushless motors, four Turnigy Plush 6 amp esc/s, frame, props and board and it is assembled. Check all components and fittings before flight.

Cost is $110 including freight with an optional aluminium case available.

I gave this five stars because four and a half stars isn't an option. Nothing is perfect. This is close.

Cheerz from Australia.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good product, although you can buy all pieces separetely and work them together for less money.
There is no low voltage protection, so be careful. Use a Volt Watch Meter.
The manual is not complete, so here follow some tips:
- To zero the yaw pot, rotate it counter clock wise (left)
- The flight controller takes about 8 seconds do beep twice (necessary to adjust the throttle range, see manual). Before this, there are some start up sounds.
- All my engines are rotating the inverse direction, but it does not matter. Just position the props accordingly.
- Some engines start before others, but it also does not matter. As soon as the power is enough to fly, the rotation will equalize.
- Stick four balsa (1.5cm) sticks at each end, protecting the props from hard landing and wall crashing.
- First time configuring the flight controller, the engines did not start. Some versions need you to lower the power and go full rudder right (hold) until led lights (do it in a flat surface). If it does not work, try reversing rudder channel.
- Try hovering for one sec few inches above floor in a place without wind until you learn to stand still. Good flight!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Disappointing product. Not working.. we bought 3 units,, all same useless Cannot setting as manual instruction. motor can run.. but aileron, elevator, rudder all not function,, can't fly at all, now want to return to HK.. wasted lots of shipping fees that not refund..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a bit tricky to set up but it flies. Make sure you remove propeller when you reverse gyros, I did the mistake of not removing them and I paid the price (it cut my fingers)! On my first flight it flipped in the wind and the dome thing at the top broke as well as 2 blades. Luckily I included spares in my order. By the way, the transmitter I'm using is T6. Ask me if you need help!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy Integrated PCB Plug and Play Micro-Quad

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
motor
acc

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.