Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global

Turnigy Дистрибьютор Минимальная мощность UBEC (желтый)

Turnigy Дистрибьютор Минимальная мощность UBEC (желтый)

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

3 719,42 руб.
Stock:
Вес:
170 g
Артикул:
373000003

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

Turnigy ввести Min распределитель UBEC подходит для 30cc плюс газе моделей.

Это устройство имеет большие возможности, которые включают в себя: вход двойной батареи, 5v изолированных линейный RX БЭК, 30 Amp напряжения регулируемые UBEC на всех выходных каналов, 8-канальный RX ввода с двумя выходами на каждом канале - упрощающих поверхности управления двойного сервопривода.

Большие включения представляют собой независимый 5V линейный регулятор обеспечивает отдельный источник питания для приемника, оптически изолированный CDI мощности и во встроенном пульте дистанционного убийства зажигания. Приемник, сервоприводов и CDI источники питания полностью изолированы друг от друга.

Это первая система Распределитель питания надежно гнездо приемника в пределах распределения мощности 'блок', тем самым сокращая кабельные трассы, добавив защиту вашего всего важного приемника и ускоряя время установки.

Особенности:
• 5v Линейный RX БЭК
• 30 Amp Servo UBEC
• Пользователи регулируемые UBEC напряжения
• 8 (+1 CDI CUT) входных каналов
• 16 выходных каналов
• Светодиоды проверки состояния 5
• проложенный лоток приемника и безопасный монтаж
• CDI питания изолированный
• CDI дистанционного управления зажиганием (дистанционное отруб)
• КДИ индикатор состояния горит индикатор питания
• CDI Мощность терминала
• Монитор напряжения CDI LED

Дополнительно: вход / выход напряжение дисплей с помощью внешнего выключателя питания

Spec:
Входные каналы: 8 (+1) CDI Cut
Выходные каналы: 16
Входное напряжение: 7-13V
Servo UBEC ток: 30A (40Amp лопнул)
Выходное напряжение: 4.8-9.7V (регулируется пользователем; по умолчанию 5.2V)
RX мощность: 5v линейный BEC
Рабочая температура: от - 20 до 85 градусов Цельсия
Вес: 80г
Размеры: 116мм х 88мм х 13мм

Product
Specifications

Дополнительная информация

  • Артикул:
    373000003
  • Brand:
    Turnigy
  • Вес ( г )
    170.00
  • длина
    175.00
  • ширина:
    40.00
  • Высота:
    145.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Top, fr den Preis unschlagbar !!! Betreibe eine 3m Bella damit vllig Problemlos. Spannung einstellbar, Zndung ber die Weiche ein und ausschaltbar mehr geht nicht TOP !!!

Warte das sie wieder kommt, brauche noch 2 Stck davon....

Bitte HK schnell wieder auffllen !!! :-)
Quality
Value
Overall
Quality
Value
Overall
IT has not LCD SCREEN. IT HAS FAKE SCREEN. There is a Turnigy writing on the fake screen. Also a led is shining back side of the fake LCD. Another functions are ok. You can buy another version of this power distributor that it has almost the same functions from another stores cheaper than hobbyking.
Quality
Value
Overall
Quality
Value
Overall
Seemed to be a great product, all worked as it should initially, after three flights, CDI kill switch stopped working, red light flashes indicating less than 4.2V input no matter what battery is connected and the switch is inoperable.
Fitted on a Yak52 with a RCG 26cc gas engine.

I will now have to purchase a CDI kill switch.
Quality
Value
Overall
Quality
Value
Overall
Be careful to isolate this board from vibrations on the larger planes. My opto for the ignition control came loose from the board in my Sbach 34pcnt, 35cc, because I had the screws down too tight on the rubber grommet mounts. Bad solder joint. The ignition randomly shuts off (sometimes while in flight!). I'm going to isolate the board and receiver in foam and use Velcro to hold it in the plane. JohnnyB
Quality
Value
Overall
Quality
Value
Overall
I have purchased 3 of the original 3 panel design panel units. I have installed them into 3 of my giant scale planes. The new panels are a single plastic box. They are easy to use and they performed as intended.
CAUTION!! One of the 3 panel design units failed and I lost all power on my 84 P-51. What I found was one of the 2 ribbon solder joints fail on the main BEC that is located on the bottom panel failed. I was able to repair the remaining units by removing the top 2 panels and repairing the ribbon solder joints. Make sure to get the solder to flow to both sides of the panel. It was a simple repair but why should we have to repair them to ensure we dont lose our planes.
Come on Hobby King Pick up your game!!!!
PS I havent used the new design yet but I do hope they have resolved the problems.
Quality
Value
Overall
Quality
Value
Overall
This Bower box works Beautifully, But always remember to leave your assigned kill switch down when you turn on your transmitter and do this before powering up your Power Distributor, Then turn on the power distributor and your kill position will always be down to kill the CDI, This sequence is necessary unless you don't care where the kill position will be. This is a built in Safety feature to always start with the system in the kill position. Hope I made it clear to avoid confusion. Happy Flying ! Ron
Quality
Value
Overall
Quality
Value
Overall
Great product awesome price for this product. Only one thing could be made better.... an voltage display fr the bec adustment or an DIP Switch with steps and not an potentionmeter...
But again an awesome Product.
Quality
Value
Overall
Quality
Value
Overall
Muy buen producto... pero no es de 30A
Quality
Value
Overall
Quality
Value
Overall
Voltage to the servo will not change with the screw adjustment. It's stay the same as the default voltage 5.2 V.
Quality
Value
Overall
Quality
Value
Overall
I have it installed in my Raven, this thing works as advertised, the Opto Kill swiitch works really well. Just one little quirk, regardless of the servo direction you put the Opto Kill Switch onto, it defaults to the off position. Meaning, if you turn on the receiver regardless on the position of the switch on the transmitter, it defaults to off. Other than that little quirk, it's a great little unit. I have 2 X 2400 Mah 20C Lipo's hooked up to it, and the voltage regulator set to 6.0 volts. To adjust this, you'll need to turn in the potentiometer about 2.5 turns inwards. But the voltage is stable regardless of the state of the 3S Lipo. Receiver voltage is stable at 5:0Volts. Highly recommended.

Note, this is a rebranded RCCSKJ Power distribution board. The Yellow one is rated at 20 amps with peak of 30, that's a whole lot of amps for any size plane.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.