New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Multistar 2814-700Kv 14 полюс Multi-Ротор Outrunner V2

Turnigy Multistar 2814-700Kv 14 полюс Multi-Ротор Outrunner V2

Shipped From:
  • Global
QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

2 018,65 руб.
Статус:
Есть в наличии
SKU:
9192000202-0
WANT FREE SHIPPING? Click here to find out more!

В поисках конечной системы питания для вашего следующего проекта Multi-ротора? Нет необходимости искать дальше!

В OutRunners Turnigy MULTISTAR разработаны с одной вещью в виду - максимального повышения производительности Multi-ротор! Они имеют высококачественные магниты, подшипники высокого качества и все точности сбалансирован для плавного хода, эти двигатели разработаны специально для использования мульти-ротора.

Эти OutRunners MULTISTAR были специально разработаны с нуля для использования мульти-ротора и не основаны на самолете двигателей.

Версии Multistar V2 этих фантастических двигателей теперь поставляются со съемным обычного типа пропеллера адаптер и плоский адаптер для 2 типов отверстий крепления гребных винтов.

Технические характеристики:
KV (RPM / V): 700
Lipo клетки: 2 ~ 4s
Макс (Вт): 340
Максимум. ток: 23A (10 секунд)
Нет ток нагрузки: 0.5A
Сопротивление системы внутреннего: 0,110 Ом
Количество полюсов: 14
Размер вала: 4мм
Размеры (Dia.xL): 35 х 35.5mm
Отверстия под болты Разнос: 19 и 25 мм
Болт резьба: M3
Разъем типа пули 3,5 мм: разъем
Вес: 102g (двигатель только без адаптеров и винтов)

  • Артикул 9192000202-0
  • Brand MultiStar
  • вес 182.0000
  • длина 110.00
  • Width 50.00
  • Высота 80.00
  • Kv ( об / об) 700.00
  • Max Токи (A) 23.00
  • Сопротивление ( тк ) 110.00
  • Максимальное напряжение (В ) 15.00
  • Мощность (Вт ) 340.00
  • Вал А ( мм) 4.00
  • Длина В ( мм ) 35.00
  • Диаметр С ( мм ) 35.00
  • Может Длина D (мм ) 17.00
  • Общая длина E (мм ) 41.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

These motors come in a fitted foam-lined cardboard box that includes bolt-on prop adapters for a conventional 6mm threaded shaft with cone nut and one for 2-hole bolted propellers. Weight is 112 grams with conventional prop adapter installed. The bottom is drilled and tapped for 19mm and 25mm M3 mounting bolts (not included). ESC leads are 15cm AWG17 silicon-jacketed wire terminated with 3.5mm bullet connectors. The case finish is nice, windings are neat, and there is no bearing play. The motor was bench-tested with 11-inch and 12-inch Gemfan plastic props. Powered by a 3s Lipo the 11 x 4.7 developed 990 grams thrust at 11.8 amps WOT. With the 12 x 4.5 the results were 1090 grams at 14.3 amps. With a 4s Lipo the results were 1410 grams at 13.2 amps for the 11-inch and >1440 grams at 18.5 amps for the 12-inch. I was unable to get an accurate thrust measurement on the 4s because it exceeded the capacity of my scale. ECalc predicts 15 minutes hover for the 12-inch 4s combination on the 2kg quad. This motor should easily handle 14-inch props but I did not have one to test with nor a scale with adequate capacity. In summary this appears to be a high-quality motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors come in a fitted foam-lined cardboard box that includes bolt-on prop adapters for a conventional 6mm threaded shaft with cone nut and one for 2-hole bolted propellers. Weight is 112 grams with conventional prop adapter installed. The bottom is drilled and tapped for 19mm and 25mm M3 mounting bolts (not included). ESC leads are 15cm AWG17 silicon-jacketed wire terminated with 3.5mm bullet connectors. The case finish is nice, windings are neat, and there is no bearing play. The motor was bench-tested with 11-inch and 12-inch Gemfan plastic props. Powered by a 3s Lipo the 11 x 4.7 developed 990 grams thrust at 11.8 amps WOT. With the 12 x 4.5 the results were 1090 grams at 14.3 amps. With a 4s Lipo the results were 1410 grams at 13.2 amps for the 11-inch and >1440 grams at 18.5 amps for the 12-inch. I was unable to get an accurate thrust measurement on the 4s because it exceeded the capacity of my scale. ECalc predicts 15 minutes hover for the 12-inch 4s combination on the 2kg quad. This motor should easily handle 14-inch props but I did not have one to test with nor a scale with adequate capacity. In summary this appears to be a high-quality motor.

Customer files
Multistar 2814 700kv 3blade prop Download [398]
Multistar 2814 700kv 2 blade prop Download [397]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save