Зарегистрируйтесь

Product Finder

Настройки

Useful links

 
[["US","AU","GB","DE"]]
Зарегистрируйтесь
Shipped From:
  • Global
  • USA

Turnigy Multistar 4822-690Kv 22Pole Multi-Rotor Outrunner

Turnigy Multistar 4822-690Kv 22Pole Multi-Rotor Outrunner

QTY:

Now save сэкономь 0,00 руб. 0,00 руб.

1 599,01 руб.
Stock:
Вес:
283 g
Артикул:
9392000004

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Война цен

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Описание
товара

В поисках конечной системы питания для вашего следующего проекта Multi-ротора? Нет необходимости искать дальше!

В OutRunners Turnigy MULTISTAR разработаны с одной вещью в виду - максимального повышения производительности Multi-ротор! Они имеют высокого класса 45SH магниты, подшипники NMB высокого качества, 22 поляков, изготовленный под заказ крепление двигателя и все точности сбалансирован для плавного хода, эти двигатели разработаны специально для использования мульти-ротора.

4822-690 включает в себя опору адаптер (6 мм) и имеет встроенный в алюминии крепление для быстрой и легкой установки на вашей раме мульти-ротора. Эти двигатели поставляются в хорошей пены выстроились металлический ящик MULTISTAR.

Эти OutRunners MULTISTAR были специально разработаны с нуля для использования мульти-ротора и не основаны на самолете двигателей.


Spec:
KV (RPM / V): 690
Lipo клетки: 4s
Максимальный ток перегрузки (Вт): 320
Рабочий ток: 16 ампер
Max.current (10s): 22 ампер
Нет тока нагрузки: 0,85 ампер
Сопротивление системы внутреннего: 0,052 Ом
Количество полюсов: 22
Размеры (Dia.xL): 47,5 х 25 мм
Вал: 3 мм
Поддерживают: 12 х 3 - 14 х 5
Вес: 95 г

* Цвет может варьироваться

Product
Specifications

Дополнительная информация

  • Артикул:
    9392000004
  • Brand:
    MultiStar
  • Вес ( г )
    283.00
  • длина
    110.00
  • ширина:
    60.00
  • Высота:
    75.00
  • Kv ( об / об)
    690.00
  • Max Токи (A)
    22.00
  • Мощность (Вт ):
    320.00
  • Длина В ( мм ):
    25.00
  • Может Длина D (мм )
    10.00
  • Максимальное напряжение (В )
    15.00
  • Вал А ( мм):
    3.00
  • Unit Weight (g):
    95
  • Диаметр С ( мм )
    48.00
  • Общая длина E (мм )
    29.00
  • Сопротивление ( тк ):
    52.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
these motors are powerful!!! id stick to 10-4.5 props for the best results... i ran these and 10-5.5 props and they run cold. ive used them with 20amp multistar controllers with 10-4.5s and worked amazing. tons of power and no heat...
Quality
Value
Overall
Quality
Value
Overall
these multistar 690kv motors wind up tight with no noticeable clogging run better with 4s battery like turnigy a2 nano bought here at HK like a hand in glove great lift and reliable even after a couple of operator error crashes they work great with 4in1 esc's several buddies are now using same battery motor config with many hours of flight each and not one hick up one group under HK with turnigy forever you'd be making a poor decision to not consider this motor for any flying style or vehicle needs
Quality
Value
Overall
Quality
Value
Overall
Awesome motors. Ordered these for a tarot 680 frame with extended arms to about 810mm. Loads of power, no syncing issues when used with xrotor ESCs. I've ran them with 12 and 13 inch propellers without issue. Great motors for the money. I have close to ten hours of flight time on these motors with zero issues.
Quality
Value
Overall
Quality
Value
Overall
I ordered six of these motors for a large hexacopter. Using afro 30amp escs and 12x4.5 blades, I had constant sync issues. As soon as any wind kicked up two of the motors were nearly guaranteed to stall and the drone would crash. I replaced them with six SunnySky V2814-11 KV700 Brushless Motors and they have been great.
Quality
Value
Overall
Quality
Value
Overall
I am using this motor in my Seawolf submarine. I get about 4h runtime with a 2S 5000mAh LiPo - thats awesome.
Quality
Value
Overall
Quality
Value
Overall
These motors run very smoothly on my 4s quad set-up with afro 30a escs (simonk 0 good buy for their price
Quality
Value
Overall
Quality
Value
Overall
I have bought this motor for an x525 and I am very happy with it. It is well balanced and runs very smooth - especially after upgrading the ESC to SimonK. My current setup: AIO with MegapirateNG 3.1.5, BlueSeries ESC 30A flashed to SimonK (latest Firmware), 4S5000 Zippy 25C, 11x4.7 SlowFly Props. The Quad is 1640g, hovering at ~205W total, so 8g/W Efficiency. Probably 12' carbon T-Mount would be even better. So about 18 Min Flying Time with 4200mAH used. Of course plenty of spare power to carry some load.
Quality
Value
Overall
Quality
Value
Overall
I have 6 of them on 680 hexacopter. They work very well. Well equilibrated while out of the box. Can fly for 12-18 min on 5800 and 9000mA respectively on FPV (680 FPV system). I run them on 13x6 carbon props.
The only objection is the noise at certain rpm, surely due to bearings, but it is supportable while they are working.
Work fine, hexacopter fly flawlessly, lots of power for gopro FPV.
I recommend them.
I have bought more for a Y6 project.
Thanks HK.
Quality
Value
Overall
Quality
Value
Overall
Bought this motor with intentions of a larger quad (550-650), overall the quality and packaging is top notch. This particular one came with extended leads so they are around 300mm long which is useful for larger crafts where your ESC is located far away.

I weighed the motor, it is approx. 95g without the extended leads, including extended leads it is approx. 120g.

The product specification says says this motor is for 4s lipo, however I have tested with my 3s lipo and it shows very good results. Using the 10x5.5" Carbon T-Mount prop from HobbyKing I got a maximum thrust of 880g at 12.5A using my 3s 4000mAh lipo.

It also runs very quiet and bearings are buttery smooth. To conclude I am very happy with this motor and feel it is well worth it's money.
Quality
Value
Overall
Quality
Value
Overall
Amazing engine. Good and long wires.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.