New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Discontinued Product

Please continue searching for a similar product.
Вес:
315 g
SKU:
9392000014
WANT FREE SHIPPING? Click here to find out more!

В поисках конечной системы питания для вашего следующего проекта Multi-ротора? Нет необходимости искать дальше!

В OutRunners Turnigy MULTISTAR разработаны с одной вещью в виду - максимального повышения производительности Multi-ротор! Они имеют высокого класса 45SH магниты, подшипники NMB высокого качества, 16 поляков, изготовленный под заказ крепление двигателя и все точности сбалансирован для плавного хода, эти двигатели разработаны специально для использования мульти-ротора.

5130-350 включает в себя адаптер пропеллера и имеет встроенный в алюминии крепление для быстрой и легкой установки на вашей раме мульти-ротора. Эти двигатели поставляются в хорошей пены выстроились металлический ящик MULTISTAR.

Эти OutRunners MULTISTAR были специально разработаны с нуля для использования мульти-ротора и не основаны на самолете двигателей.


Spec:
KV (RPM / V): 350
Lipo клетки: 6s
Максимальный ток перегрузки (Вт): 400
Рабочий ток: 13 ампер
Max.current (10s): 16 ампер
Нет ток нагрузки: 0,5 Ампер
Сопротивление системы внутреннего: 0,099 Ом
Количество полюсов: 16
Размеры (Dia.xL): 51 х 30 мм
Вал: 4 мм
Похожие Опора: 15 х 5,5
Вес: 152g

  • Артикул 9392000014
  • Brand MultiStar
  • Вес ( г ) 315.00
  • длина 110.00
  • Width 60.00
  • Высота 75.00
  • Kv ( об / об) 350.00
  • Max Токи (A) 16.00
  • Сопротивление ( тк ) 0.00
  • Максимальное напряжение (В ) 22.00
  • Мощность (Вт ) 400.00
  • Вал А ( мм) 4.00
  • Длина В ( мм ) 30.00
  • Диаметр С ( мм ) 52.00
  • Может Длина D (мм ) 20.00
  • Общая длина E (мм ) 35.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex

So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save