Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

Turnigy Multistar BLheli_32 ARM 4-in-1 32bit 21A 11g Race Spec ESC 2~4S

Generating Links

Turnigy Multistar BLheli_32 ARM 4-in-1 32bit 21A 11g Race Spec ESC 2~4S

Цена:

Now save сохранить 0,00 A$ 0,00 A$

67,36 A$
Отправлено из:
  • USA
  • Global
Уже купили
Примерное время доставки: Нет предполагаемого времени прибытия [ ? ]
Статус:
Нет в наличии!
Артикул:
9351000100-0
Хотите бесплатную доставку? кликните сюда Узнать больше!

The Turnigy MultiStar BLheli_32 ARM 4-in1 ESC is very light, compact, super simple to install and has a very easy setup process. This 4-in-1 ESC is the perfect solution where you are looking for outstanding performance in a small and neat package. If you're trying to get an edge on the competition and take your FPV drone racing seriously then the Turnigy MultiStarBLheli_32 ARM 4-in-1 32bit ESC is worth taking a closer look at.


Turnigy MultiStar BLheli_32 ARM ESCs feature a proprietary firmware (rumored to have been developed in DrEvils Lab!!) that delivers a smooth linear throttle response, without sacrificing a rapid, crisp response to your throttle inputs. The ESC is supplied with a 6 pin SH 1.0 signal input lead for easy connection to most flight controllers. Alternatively there is also supplied a SH 1.0 to 2.54mm DuPont breakout cable which will connect to standard servo pin headers.


Each 4-in-1 ESC has plated connections to allow you to easily solder your motor wires directly to the PCB and then add your preferred connector to the pre-tinned power cables. With their small lightweight design these ESCs will have you racing fast and at a very affordable price.


Features:
• Lightweight (11g)
• 4 x 21A ESCs in one unit
• Very compact
• Smooth and linear throttle control
• Fast response to throttle input
• Arm Cortex-M0 MCU
• Stalled motor protection
• Throttle signal loss protection
• Safe power-on (throttle lockout)
• Supports 480Hz high refresh rates
• Programmable


Specs:
Constant Current: 4 x 21A
Cells: 2~4S
Input Voltage: 8.4v ~ 16.8v
BEC: Yes
MCU: Arm Cortex-M0
Timing: Auto
Frequency: 48Mhz
Programmable: Yes (with Multistar program card)
PCB Size: 36 x 36 x 5mm
Weight: 11g


Includes:
1 x 4-in-1 BL-32 ESC
1 x Mounting kit
1 x Cable connection set

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Marcus | Проверенный покупатель

  • Overall
  • Quality
  • Value

Works like a charm!

Jan 30, 2021

Connected it to a Matek F405-CTR and set it to Dshot 600. It worked right away. Have been using it for two years by now and never had a problem. It came with BLheli32 Rev. 32.3. I have since updated to 32.7 and can now run it with bidirectional Dshot enabled.

Jan Heinen | Проверенный покупатель

  • Overall
  • Quality
  • Value

Fijne regelaar.

May 27, 2020

Mooi kompakte regelaar. Helaas is de 32 bit multistar program card uitverkocht

Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!